Question about 1999 Ford Escort

1 Answer

I need to find the complete specs of my motor and what basic things i can do to enhance its performance

Posted by on

  • erick lopez May 11, 2010




    Acceleration (0-60 mph): 7.8 sec.
    Braking Distance (60-0 mph): 143 ft.

    Road Holding Index: .78 g
    Base Number of Cylinders: 4

    Base Engine Size: 2 liters
    Base Engine Type: Inline 4

    Horsepower: 130 hp
    Max Horsepower: 5750 rpm

    Torque: 127 ft-lbs.
    Max Torque: 4250 rpm

    Maximum Towing Capacity: 1000 lbs.
    Drive Type: FWD

    Turning Circle: 31.5 ft.

  • Ian Jones May 11, 2010

    hi, what is it you want to do exactly, and how much money do you want to spend

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 27 Answers

You cant never go bad with intake system or full synthetic oil also another cheap way to gain horsepower is cleaning or replacing fuel and intake filter and if you looking for somemore horses i recommend legal headers

Posted on Mar 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the compression reading for nissan Na20 engin


Downlaod Nissan engine and workshop manuals - Motor

www.motore.com.au/downlaod-nissan-engine-and-workshop.../index.ph...
Nissan Skyline R32 engine factory workshop and repair manual download .... enginethe expansion of the high-temperature plus high-pressure gases ... Diesel motors take inside air just, plus soon before peak compression, spray a little ...

Building Power With Nissan's Most Popular Engines - Tech ...

www.superstreetonline.com > How To > Engine
Mar 12, 2012 - Performance, Specs, Price & More. ... Sstp 1203 02+building powernissan engines+vq35de engine ... Higher compression pistons are needed with big cams, but putting those two things together with variable valve timing ...

Wholesale nissan na20 engine - AliExpress.com

www.aliexpress.com > Wholesale Product
Wholesale nissan na20 engine / from China nissan na20 engine / Wholesalers ...Engine Cylinder Pressure Compression Compressor Gauge Meter Test Tester ...

Jan 27, 2016 | Nissan Cars & Trucks

1 Answer

What's he drive train cycle for 2003 audi a6


Throttle Body Alignment (TBA) - Ross-Tech Wiki

wiki.ross-tech.com/wiki/index.php/Throttle_Body_Alignment_(TBA)
This procedure cycles the motorized throttle body through various states (idle, part ... The TBA can be performed on both Drive-By-Wire (DBW or E-gas) as well as ... Typically, '96-'99 VW/Audi have motorized Cable-throttle, and '00+ VW/Audi ... 5 and 95C; If fault codes were cleared cycle the ignition off and back on prior to ...Missing: press ‎train ‎clear

How to Perform a Basic Drive Cycle - RepairPal

repairpal.com > Car Care Advice > How To's
The Drive Cycle is one of the methods used by the powertrain control module ... ADrive Cycle is a special test drive that duplicates the scenario of a person ... This signals that an emission system problem and fault code has been ... If the fuel tank is near empty or completely full, many of the basic tests will not run at all.

Anyone have a drive cycle on how to drive the car after fixing one


Dec 02, 2015 | Audi Cars & Trucks

2 Answers

How to reset fuel pump on 2005 bmw 3x


I cant thin of a good reason to perform a "fuel pump reset" if there were such a thing?
Understand, the fuel pump is simply a tiny motor in the fuel tank that pushes gasoline out for the engine to use. It has no memory, no settings, or adjustments (for the most part, some newer ones do regulate w a duty cycle, but the pump is still a simple motor).
If you are having problems with starting or acceleration and it may be fuel related, the best thing you can do is get it scanned and or tested mechanically by a technician with access to an enhanced BMW scantool.
As to the fuel pump reset, there really isnt such a thing...fuel pump;s always work with the kjey and engine rpm UNLESS something breaks, or the alarm/theft system disables fuel. Thjere are no fault codes that turn off the fuel pump on your vehicle, so no memory to erase to ruen it back on or change its operation.

Apr 13, 2015 | BMW Cars & Trucks

1 Answer

My van turns over but will not crank


HUH??? I assume you mean to say that it "cranks, but will not start".
There are MANY things that can cause this. The first thing that SHOULD be done is to scan the engine control module for possible fault codes. This can greatly speed up the diagnosis process.

Other than that, the only thing I can tell you is that an internal combution piston engine needs four basic things (components) to make it run:
(1) Air-fuel ratio
(2) Volumetric efficiency
(3) Compression
(4) Ignition

If your engine will not start and run, it is because one of these components of basic engine operation is missing.

To get the engine running again, you must:
(A) Determine which of the basic components is/are missing
(B) Perform diagnosis relative to the missing component(s) to identify the CAUSE of it/them being missing
(C) Perform repairs necessary to correct the CAUSE of the problem.

Apr 19, 2012 | 2001 Dodge Caravan

1 Answer

2003 gmc 2500hd duramax loss of excelleration/throttle


Diesels only need basically 3 things to run.
1. Air
2. Fuel
3. Compression.
If one of the 3 is lacking performance would suffer or completely keep the truck from starting.

Oct 01, 2011 | Cars & Trucks

1 Answer

Overhauling motor need all torque spec.


To save incorrect information being passed along.
Invest in a Haynes Manual, for your Make and Model. These are available at Checkers and Auto Zone, and will give you all the step by step instructions, and exact sequence and torquing specs, to enable you to complete the task correctly.

Regards, DT

Mar 02, 2011 | Dodge Dakota Cars & Trucks

1 Answer

Just purchased vehicle and don't have an owners manuel for maintaince specs.


Haynes manual 24071 covers the new style S-10, Sonoma, Blazer and Jimmy. It will give you all specs for the motor, transmission, and any other options. I have a '91 S-10 and a '96 Jimmy. All specs from Oil Type, Transmission fluid type, and the weight of gear oil needed are included. It also offers step by step instructions on how to perform most repairs and tourque specs on almost all bolts. Good luck and wise choice on vehicles.

Feb 03, 2010 | 2001 Chevrolet S-10

1 Answer

2001 tiburon won't start i have replace the fuel filter plugs cables coil pack fuel pressure regulator. i don't know what else to do. may be is the timing belt


sorry your tiburon won'y start and you have spent so much money with no results.so lets start with basics, is battery voltage at least 12 volts and does the engine crank over ?, next do you have fuel pressure of 50 psi and good volume?remove a fuel injector electical connector and test for injector pulse.then perform a fuel pressure drop test on each inj.this will tell you if they are spraying.do you have good spark at all the sparkplugs? perform a compression test, spec is 203-218 psi. next you will need to check camshaft timing by bring # 1 cyl. to tdc on the compression stroke and checking the timing marks on the crank and camshaft gears.wish you the best let me know the results.

Oct 25, 2009 | Hyundai Motor 2000 Tiburon

1 Answer

I have a 1999 blazer with a blown 4.3 motor would


Any High Performance ENGINE would Need to Be WIRED Seperatly from 1999 Set up Things Like Primary Ignition system ,As Far as How to Build the Stroker Engine , Go With What ever Specs You Like. It Just Has to be Wired AWAY from 1999 Set up

Aug 01, 2009 | 1999 Chevrolet Blazer

1 Answer

Vw passat 2000 1.8t front wheel drive


please rate me solved...thanks

DTC P0411/16795: SECONDARY AIR SYSTEM - INCORRECT FLOW DETECTED
Test Requirements
Ensure all fuses are okay, battery voltage is at least 11.5 volts, all electrical accessories are off, A/C is off.
Ensure engine is mechanically sound.
Test Procedure

NOTE
Secondary air system is activated by ECM and blows air into exhaust pipe
upstream of catalytic converter for 100 seconds during a cold start, 41-91°F (5-
33°C). Engine must be cold to perform following test procedure.

1. Ensure fuse and secondary fuse (secondary fuse is 40 amp and is located in fuse holder on top of battery)
are okay. Check hoses and components of Secondary Air Injection System, for damage, loose fit and
improper installation, check vacuum hoses for Secondary Air Injection System. Repair as necessary.
Erase DTC memory. Verify repair. If DTC does not reset, test is complete. Perform ECM relearn
procedure. See TEST DRIVE RELEARN PROCEDURE .
2. Remove engine cover. Disconnect pressure hose from Secondary Air Pump Motor (V101), by pressing
buttons on hose connector. See Fig. 33 . Using scan tool, check Secondary Air Pump Motor (V101) in
scan tool Output Diagnostic Test Mode (Secondary Air Pump Relay activation mode). See OUTPUT
DIAGNOSTIC TEST MODE .
3. Secondary Air Pump Motor (V101) should run in intervals and air should exit pump at hose connection.
If Secondary Air Pump Motor (V101) is okay, go to step 7 . If motor runs and no air exits secondary air
pump motor, replace faulty Secondary Air Pump Motor (V101). Erase DTC memory. Verify repair. Test
is complete. Perform ECM relearn procedure. See TEST DRIVE RELEARN PROCEDURE . If
secondary air pump motor does not run, go to next step.
4. Disconnect Secondary Air Pump Motor (V101) harness connector, install LED test light at secondary air
pump harness connector terminals. Turn ignition on. Using scan tool, activate Secondary Air Pump Motor
(V101) in scan tool Output Diagnostic Test Mode (Secondary Air Pump Relay activation mode). See
OUTPUT DIAGNOSTIC TEST MODE . LED test light at Secondary Air Pump Motor (V101) harness
connector should flash. If LED test light at Secondary Air Pump Motor (V101) harness connector does
not flash, go to next step. If LED test light at Secondary Air Pump Motor (V101) harness connector
flashes, replace faulty Secondary Air Pump Motor (V101). Erase DTC memory. Verify repair. Test is
complete. Perform ECM relearn procedure. See TEST DRIVE RELEARN PROCEDURE .
5. Using DVOM check resistance of Secondary Air Pump Motor (V101) wiring. See appropriate WIRING
DIAGRAM under ENGINE PERFORMANCE in SYSTEM WIRING DIAGRAMS. Resistance should
be a maximum of 1.5 ohms for each reading. Check wiring for short circuit to one another in Secondary
Air Pump Motor (N101) harness connector. Repair as necessary. Erase DTC memory. Verify repair. Test
is complete. Perform ECM relearn procedure.
Secondary Air Pump Motor (N101) wiring is okay, go to next step.
6. Check Secondary Air Pump Relay (J299) and Secondary Air Pump Relay (J299) wiring. See DTC
P0418/16802: SECONDARY AIR PUMP RELAY (J299), MALFUNCTION . Repair or replace as
necessary. Erase DTC memory. Verify repair. Test is complete. Perform ECM relearn procedure. See
TEST DRIVE RELEARN PROCEDURE .
7. Disconnect vacuum hose from Secondary Air Injection Valve (N112) and disconnect pressure hose from
secondary air pump motor, press buttons on pressure hose connector to disconnect pressure hose. See Fig.
34 . Blow lightly into disconnected pressure hose, Combi-Valve should be closed. Connect hand vacuum
pump to disconnected vacuum hose and apply vacuum to Combi-Valve, Combi-Valve should open. If
Combi-Valve opens when vacuum is applied, Combi-Valve is okay. Go to next step. If Combi-Valve
does not open when vacuum is applied, replace faulty Combi-Valve. Erase DTC memory. Verify repair.
Test is complete. Perform ECM relearn procedure. See TEST DRIVE RELEARN PROCEDURE .
8. Check Secondary Air Injection Valve (N112). See DTC P0412/16796: SECONDARY AIR
INJECTION VALVE (N112), ELECTRICAL CIRCUIT MALFUNCTION . Repair as necessary.
Erase DTC memory. Verify repair. Test is complete. Perform ECM relearn procedure.
NOTE: Do not use compressed air to check Combi-Valve.
2000 Volkswagen Passat GLS
2000 ENGINE PERFORMANCE Self-Diagnostics - 1.8L Turbo

Jun 21, 2008 | 2000 Volkswagen Passat 4Motion

Not finding what you are looking for?
1999 Ford Escort Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21986 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...