Question about 1998 Honda Odyssey

2 Answers

Oil leaking around the area where the oil filter connects to the engine.The spacer that is connected to the engine. between spacer and engine.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Oil Sending unit, right above oil filter, just happened to me

Posted on May 08, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

Take off the filter and unbolt the adapter. There is a o'ring style gasket between them. It should be available aftermarket, but I know the dealer has them for about 8 dollars. The o'ring gets brittle, cracks and leaks.

Posted on Mar 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

I changed the intake on my 2000 expedition 5.4 it's running ruff and having trouble idling


This is most likely a vacuum leak. Check all the hoses and connections. Make sure there are no splits on the ends of the hoses. If there are no bad hoses or missed connections, take wd40 and spray around the entire gasket area on the intake when the engine is running. If it starts to smooth out, you have found the leak.

May 15, 2014 | Cars & Trucks

1 Answer

2006 chevy cobalt 5-speed, engine oil fill area where it connects to the engine is leaking alot of oil.


I don't know the cobalt personally but if it is the V8, they may have a neck that just use an O ring around the metal sleeve, otherwise it is a leaking rocker cover gasket

Jan 09, 2014 | Cars & Trucks

1 Answer

Pt cruiser is using a quart of oil every 100 miles


Should be a leaking oil pressure switch.
First, check to oil filter, area to see if the oil is obviously coming out around the filter. Filter and area around it should be dry,.
There has been rare instance of the "o-ring" on the top of the oil filter sticking to the engine when the filter was changed, and the new oil filter then won't seal because there are now 2 gaskets between the filter and the engine block.
Check the engine drain plug. Is it loose or stripped? That area should also be clean and dry.
The valve cover gasket should be clean and dry all the way around.
Most common cause for that much oil use is the oil pressure switch, should be leaking with the motor running.

Jan 04, 2013 | Cars & Trucks

1 Answer

OIL LEAKING COMING OUT OF DIP STICK HOLE


sounds like you engine cant vent so its using the weakest point the dipstick, check your engines breathing system and the pcv valve it might be blocked, find it connected to the air filter housing with a hose , it should rattle when you shake it if not replace it.

Feb 24, 2012 | 2000 Jeep Grand Cherokee

1 Answer

Leaking transmission fluid


TRANSMISSION FLUID LEAKS,CAN BE FOUND AROUND PAN GASKET.CHECK PAN GASKET,IF IT LOOKS WET AND YOU SEE FLUID DRIPPING AROUND THE EDGE OF OIL PAN, REPLACE PAN GASKET, WHILE YOU REPLACING PAN GASKET REPLACE TRANSMISSION FILTER WHILE OIL PAN OFF.IF TRANSMISSION OIL PAN NOT LEAKING, CHECK TRANSMISSION OIL COOLER LINES GOING INTO RADIATOR YOU WILL LOOSE A LOT OF FLUID THERE ALSO TORQUE SHAFT SEAL WILL CAUSE HEAVY FLUID LEAK WHILE ENGINE RUNNING CHECK OIL COOLER LINES AND LOOK AT THE TORQUE AREA WHILE ENGINE RUNNING YOU WILL SEE FLUID POURING WHILE ENGINE RUNNING THE OIL PUMP PRESSURE WILL PUSH FLUID OUT AT THE LEAKING AREAS.

Aug 01, 2011 | 1991 Nissan Stanza

3 Answers

What causes the oil filter housing to leak - it is above the filter - we replaced the filter but this is on seam about 1/2 inch above the top of the filter


If there is a spacer between the oil filter and the engine block then you would could have a bad seal on it. If its similar to a Honda there will be to hoses going to the spacer. This spacer is called the oil cooler adapter. If this is it. Take oil filter off and the remove the oil cooler nut if there is enough room you won't need to disconnect cooling lines. Pry the Adapter away from the block with screw driver. remove old seal clean surface with clean rag install new seal. Wipe a little oil around the seal just like you would the oil filter. 'Tighten snug, but don't over tighten. Not sure the correct torque for this. Hope this helps you. This similar problem occurred on my 1995 Honda Odyssey.

Jan 29, 2011 | 1996 Volkswagen Cabrio

3 Answers

Grease leaking from front end


Check the axle boot. When they rip or crack they will sling grease around.

Oct 29, 2009 | 2000 Chevrolet Blazer

2 Answers

1992 chevy siverado pickup 350 engine,I have a oil leak in the side of my motor around the area of the oil filter,but it's not the oil filter and i replaced the valve cover gaskets


you definately should check the oil pressure switch its probobly above or to the side of the oil filter and can make it look as if the filter is leaking,it will be threaded into the engnine itself and will have a connector on the top of it most likely with only 2 wires going to it

Apr 25, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Oil leaking from the gasket on the metal piece under oil fltr


Make sure that the oil filter is tight. Usually they only leak if dirt was in the gasket when the filter was installed or the filter wasn't tightened enough.

Apr 14, 2009 | 2001 Kia Sportage

2 Answers

Oil leak


If it's leaking from the oil filter spacer.( the 2 inch metal ring that attaches to your block, and has two rubber hoses coming out of it, and your oil filter attaches to) There is an o-ring between the spacer and the block. Take off your oil filter, remove the oil filter stud with 1 3/16" socket( or metric equivalent) and the spacer will come off. I found all the auto parts stores around me said that the o-ring was a dealer item. I bought a FRAM PH3387A oil filter and removed the o-ring on that. It fit perfectly, snug down your oil filter stud to specs, then install your oil filter. Double check that the oil filter is not double gasketed, and your are fixed!

Jan 31, 2009 | 1995 Honda Odyssey

Not finding what you are looking for?
1998 Honda Odyssey Logo

430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...