Question about 1991 Jeep Cherokee Limited
My 1991 jeep cherokee laredo isn't starting' nor is it turning over. This only happened two days ago when i went out to start the car and it hesitated twice before finally starting up the third time. I let the car warm up for 10 minutes and turned it off to run back inside the house, when i came back out, the car wouldn't start or turn over. I only bought the car two weeks ago but this isn't the first time its happen. The first time it happened i thought it might the starter so i taped it a few times thinking that the gears were stuck after a while it finally did start. A few days later i took the starter off and got it tested it tested good. Upon reinstalling the starter i found loose wireing connected to the starter that was fixed thinking that was the problem. Today i took the starter off checked it again along with the fuses and battery and its still not starting. When i turn the key lights do come on and i can hear a faint clicking or tapping. need help thankyou
You can test your signal wire to the starter by having someone turn the key to start while you put a test light on the signal wire at the stater.If there is no signal on the light then there is a problem with the sending wire from the ignition.
Posted on Mar 07, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 22, 2015 | Cars & Trucks
Jun 03, 2014 | 1995 Jeep Grand Cherokee
Nov 05, 2012 | Cars & Trucks
Jun 15, 2017 | 2000 Jeep Grand Cherokee Laredo
Jun 01, 2011 | Jeep Grand Cherokee Cars & Trucks
Apr 23, 2010 | 1994 Jeep Grand Cherokee
Jan 01, 2010 | 1997 Jeep Grand Cherokee
Apr 17, 2009 | 1995 Jeep Grand Cherokee
Apr 15, 2009 | 2002 Jeep Grand Cherokee
Jul 21, 2008 | 1996 Jeep Grand Cherokee
270 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: