Question about 2002 Mitsubishi Galant

1 Answer

Cant find where to adjust headlights on mitsubisi

Cant find where to adjust headlights on mitsubisi galant 202

Posted by on

  • Anonymous Mar 28, 2009

    I, too, can't find the adjustment screws to adjust the headlight on my Galant (2001)

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

Posted on Sep 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 mitsubisi galant will crank but wont start


There's two main issues that cause this:
no spark; and no fuel.

No spark can have many causes, from a dead spark coil to a broken crank angle sensor. Can also be the coolant temp sensor.
Check for any error codes from the ECU.

Open the gas cap and see if the car swill start. You should be able to hear a buzzing from the fuel pump just after you try to start.

Mar 17, 2015 | 2005 Mitsubishi Galant

1 Answer

Remove a starter motor from a renault megane


You have this lested as a 2002 Mitsubisi Galant.

Oct 10, 2012 | 2002 Mitsubishi Galant

1 Answer

How to change headlight on 2000 galant


  • 1
    Place the Mitsubishi on a flat service in park. Set the parking brake before continuing.

  • 2Open the Galant's hood and locate the headlight cover -- roughly 3-inch wide circular piece of plastic -- behind the headlight bulb intended for replacement. Turn this cover clockwise to unlock it and pull it from the headlight assembly, exposing the headlight socket below it.


    3

    Hold the rear of the headlight socket and turn it counterclockwise to unlock it. Pull the headlight socket and bulb from the headlight assembly.


    4

    Grab the bulb and pull it from the socket with a slight wiggling motion.


    5

    Pick up the new 9003 headlight bulb using a clean, lint-free cloth and line up its prong with the slots in the socket. Never tough the bulb with your bare hands, as the oils left by your hands can cause the bulb to burn out prematurely.


    6

    Slide the socket and new bulb into the headlight assembly and turn the socket clockwise to lock it into place.


    7

    Place the plastic cover behind the bulb and turn it counterclockwise to lock it into place.


    8

    Repeat Steps 1 through 7 for the headlight bulb on the other side of the Galant, if needed.


    9Close the Galant's hood.


    Read more: How to Put in a Headlight Bulb on a 2000 Mitsubishi Galant ' eHow.com http://www.ehow.com/how_8210819_put-bulb-2000-mitsubishi-galant.html#ixzz27iQwCdOe

    Sep 27, 2012 | 2000 Mitsubishi Galant

    1 Answer

    Srs light stays on when car is turned on/mitsubisi galant 2001


    Have the car ever been in an accident? Bumped even a little? Even though an air bag was not deployed, crash data may be stored and a new module may need be installed.
    Also see if all the seat belts work. If one does not pull out or retracts properly that may be it.
    A shop scanner should also be able to tell you the reason for the SRS (Supplimental Restraint System) light

    Oct 07, 2011 | 2001 Mitsubishi Galant

    2 Answers

    Drivers side window will not go up, I think it's the motor. 202 mitsubishi galant 4 door


    If u switch the WiNDOW and u hear some buzzing inside the door, means the motor is still working! Mostly the part easily get broken is the WiNDOW REGULATOR assembly! You could buy and replace the regulator only w/o the motor! Before putting a new regulator add some GREASE on the cable link and the plastic guide!
    Taah!

    Nov 10, 2010 | 2002 Mitsubishi Galant

    2 Answers

    How to change the headlight bulb on a 2001 mitsubishi galant?


    On either side of the headlight wiring assembly, in the engine compartment, you will find 2 small tabs. They are located to the sides and towards the bulb of the plastic assembly. Press these 2 tabs in while pulling the wire assembly out. Remove the rubber gasket and unhook the wire spring holding the bulb in place. The bulb come right out. The bulbs are halogen so do not handle the new bulb by the glass.

    Mar 04, 2009 | 2001 Mitsubishi Galant

    1 Answer

    Headlight Mis-Alignment


    It is most likely that the in-out angle is factory set. As for the lamp it should remove from the rear of the lens assembly. Where the wires plug into the lamp, there is a ring that twists and releases the lamp. It is also possible that the lamp itself can be twisted which will release it.

    Jan 18, 2009 | 1990 Mitsubishi Galant

    1 Answer

    How to adjust headlights on 2000 toyota celica


    no u dont have to take lens cover off behind headlights there is two adjusting bolts one top one bottom in corner off wing

    Nov 10, 2008 | 1995 Mitsubishi Galant

    1 Answer

    Headlights


    The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

    You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

    Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

    If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

    Oct 15, 2008 | 1995 Mitsubishi Galant

    Not finding what you are looking for?
    2002 Mitsubishi Galant Logo

    502 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mitsubishi Experts

    yadayada
    yadayada

    Level 3 Expert

    70374 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22041 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6878 Answers

    Are you a Mitsubishi Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...