Question about 1999 Plymouth Voyager

2 Answers

Where is the water pump located 99 plymouth voyager

My van has been over heating and spilling water from the area by the serpentine belt i can only say its the water pump but ive never worked on a dodge family vehicle so not sure what it looks like and where its at

Posted by on

  • txsuperman23 Mar 06, 2009

    has a 2.4liter

  • yadayada
    yadayada May 11, 2010

    what engine do yoy have?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Plymouth Master
  • 70,347 Answers

The reason u can't see the pump is because it is driven by the timing belt and is hidden under the plasticwhere is the water pump located 99 plymouth voyage - 7b4ce03.jpg cover that is over that belt.

Posted on Mar 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 837 Answers

I don't need to give credit here to anyone or any company other than Autozone for this step by step to do your waterpump.

Posted on Mar 06, 2009

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpentine belt coming off on a 99 plymout grand voyager


Verify that you have a good/correct belt then check your belt routing and alignment. Then check pulleys for faulty bearings. A free spin with the belt removed should be enough. Whats really common on those is the belt tensioner goes out

Jan 11, 2013 | Cars & Trucks

1 Answer

My 99 Grand Voyager keeps throwing the serpentine belt off..I just replaced the water pump and the belt was good for 3 days now I am back to square 1


gates make a kit for theses that is a double sided grooved belt, new grooved tension er and idler pulley because this was such a common problem with theses vans. I have put theses on a few vans and the people were so happy that the belt don't come off anymore even in the heavy rain. The gates part number for the 3.3 and 3.8 V6 is 38379K any parts store that sell gates belts (most of them do) should have this or be able to get it. Its not too hard to install and is about $130 bucks

Mar 16, 2011 | Plymouth Grand Voyager Cars & Trucks

2 Answers

How do you put on a fan belt..1996 plymouth voyageur?


  • The 3.3L & 3.8L engines are driven by single serpentine belt. The belt tension is maintained by an automatic tensioner. The belt operates the alternator, water pump, air conditioner and power steering.
  1. Raise the front of the vehicle and safely support it with jack stands. This is not essential but makes it easier to remove the splash shield in the next step.
  2. Remove the right front splash shield.
  3. Use an open end wrench to rotate the bolt clockwise on the tensioner which releases the tension on the belt. A socket will be too long and the socket wrench will bear against the wheel well preventing adequate rotation. The belt routing diagram is located on the care frame near the front of the hood on the passenger side.
  4. Remove the belt and install a replacement.
  5. Proper belt tension is maintain by dynamic tension
  6. Reinstall the right front splash shield then lower the front of the vehicle.

Note: It is best and saves time to use a serpentine belt tool kit . It costs about $30.00.

Mar 06, 2011 | 1996 Plymouth Voyager

2 Answers

My water pump went on my 98 plymouth voyager how much will it cos


You don't mention what engine you have ( there are 4 cyl, or 2 v-6 choices 3.0L or 3.3L available for that year). The water pump costs anywhere from $50 to $80, depending where you buy it, labor is supposed to take about one hour (access to the water pump is through the wheel well, after removing the plastic liner). There are other things that can raise the cost: how old is your coolant? This is a good time to have it changed if it needs it, what is the condition of the serpentine belt? It has to be removed to replace the pump, so again, if it needs to be changed, this is the time to do it. Dealers are charging about $100 an hour in my area, private garages less, and there will be additional charges for 'environmental' concerns, which is basically properly disposing of parts and fluids. So, the best thing to do is check with your local dealer and service stations and get an estimate on the work, and if anything else is needed (coolant, belt, etc) for a price in your area. With the economy not doing well, there should be plenty of repair facilities eager to give you an estimate. Good luck.

Oct 09, 2009 | 1998 Plymouth Voyager

1 Answer

What size engine and which serpentine belt do I need for my 1994 Plymouth Voyager 10th Year Special Edition SE? How do I locate the belt? The van makes such a racket that I can't take it in traffic without...


year make model and production date. Go auto zone ore one those kinds places they should be able to get the correct one Look the belt see if there number on the inside.
Here Best thing buy all 3 belts at auto zone take back the ones that arent the correct size.
In the mean time buy some belt spray to qwiet the thing down so your not embarrsed.
Buy Hanes book on the van also.
Hope this helps you if does please give me thumbs up seya

Jul 29, 2009 | 1994 Plymouth Voyager

2 Answers

Where is the water pump located on a 99 plymouth voyager, 3.0Lit?


It is driven by the timing belt. You'll need to support the front of the engine, remove the mount and timing covers. The pump sits in the center between the heads and has a tube running into the back of it that sometimes is difficult to get out. If you are uncomfortable with setting up the timing belt you may want to have a professional do the job.

Jul 18, 2009 | 2000 Plymouth Voyager

1 Answer

2000 plymouth grand voyager 3.3 V6, loud noise in serpentine belt area


remove belt and check the pulleys. this belt routing is odd and its very tight. i have seen many failed tensoner pulleys on these. it should spin smoothly and quiet. and grinding or bumpyness in it and i would replace it. check all pulleys while your there. they are not expensive.

good luck,
Michael

Apr 29, 2009 | Plymouth Grand Voyager Cars & Trucks

2 Answers

Antifreeze leak in a 1999 plymouth voyager. Lookslike its coming from around oil pan. Water pump replaced last year.Also no heat


check all hoses .from thermostat to radiator to water pump. check heater hoses.if all is good .make sure your water pump not leaking around the gasket area.if all is good.core plugs could be leaking.

Apr 12, 2009 | 1999 Plymouth Voyager

Not finding what you are looking for?

Open Questions:

See all 1999 Plymouth Voyager Questions

1999 Plymouth Voyager Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...