Question about 2000 Hyundai Accent

1 Answer

Accent stuck in first gear,

Gear lever flaps back and forth, cluch pedal ok, and car can be started and drove,but you cant change out of first gear

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 9 Answers

There's a couple of rods, either on the gearchange linkage or on the outside of the gearbox, one does front to rear action on the gear lever, the other does left to right. theres usually a worn ball joint on the end of the rod which has probably fell off! Will need a new rod to fix the problem, a temp repair can sometimes be made with a couple of cable ties to hold the ball joint together until a new part can be got. 

Posted on Mar 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 540 i will not start, and the gear lever is stuck in park, what is the issue?


Gear shift lock out pin is stuck. Remove the retaining screw and you can shift until you take it to mechanic jiggle it and pull back and forth usually fixes the issue

Dec 12, 2014 | Cars & Trucks

1 Answer

Shift lever blocked in position D ?


Could be the park neutral switch. It senses that foot is on the brake pedal so shifter can be moved.

Jun 19, 2014 | 2003 Ford Mustang

1 Answer

HOW TO FIX GEAR SHIFT STUCK IN PARK? HYUNDAI ACCENT


in order for your car to come out of park,the brake lights have to come on. it's a safety feature. are your brake lights coming on?if not then check for a blown brake light fuse in the fuse panel. if not that the brake light switch above the brake pedal may have gone bad.or another solution is, are you parked in a bind? with alot of pressure on the transmission? it will take 2 people to get it unstuck. 1st person in car with key on,2nd person rock car back and forth to free it from a bind. sometimes cars[automatics] do this.while the cars rocking try shifting out of park.hope this helps and thank you for choosing fixya.com

Jan 10, 2011 | 1999 Hyundai Accent

1 Answer

My cluch is stuck on automatic .can not move into gear.


theres a button under the dash.. if you lie down and look under the dash, push the brake pedal with your hand.. you will see it press against a button, that button is bad.. when the brake pedal pushes against that, it unlocks the shift selector so you can choose your gear.. change that and your problem will be solved.

Dec 07, 2010 | 1997 Ford Explorer AWD

3 Answers

My car is stuck in second gear, the stick shift is just flopping back and forth. I can not change gears so I am driving with my hazards on and 20mph in second gear. Any thoughts


Is it a stick shift or auto tranny?

If stick shift then the shift fork may be bent thus why it's stuck or

A tranny mount is bad causing the tranny to lean on the shifter mechanism

Or you need a clutch adjustment.

Mar 31, 2010 | 1999 Hyundai Accent

1 Answer

We just bought a 2000 Suzuki esteem, the problem is whenever we start the car, it becomes very difficult to shift between gears when the car is idle, but when the car is on the freeway, shifting works...


The cluch not fully disingaging , ( carpet under the pedel, pedel bent , bushing worn out of pedal, low on fluild in clutch master ( brake fluid ) and bad cluch master or slave or air in system. A damaged clutch will drag too. If it shifts OK with the car shut off standing still trans lube is likly OK too. If it has a clutch cable it may need to be adjusted pull up on the clutch pedal as high as it can go then pust down with your hand it should only go down an inch before it gets harder to pust down as it openes the clutch and shoul continue to go down about 4 or more inches. The pedal should be as high or a little higher than the break paedal. If not the pedal height may be needing to be adjusted higher. Some slave master hydrolic sysems aren't adjusted and have to be replaced to fix lack of enought movement Clutes that are hard to pust in or get much harder as you get closer to the floor the cluch is likly to be worn out and need to be changed with a new clutch kit and resurface the flywheel. The flywheel can change to unflatand the cluch can drag. engine oil getting into the clutch though a leak in the valve cover or rear main can get on the cluch and make it drag and grab.

Mar 21, 2010 | 1996 Suzuki Esteem

1 Answer

2002 hyundai accent my cluch peddel goes soft


check fluid level if low bleed out the system.If thats fine then you have slave cylinder Problem.Before Changing the cluch assembly check your master cylinder is pushing good pressure.

Jul 17, 2009 | 1998 Hyundai Tiburon

1 Answer

Mitsibishi colt 97 stuck in 1st gear


Your link broke off. What might have happened is the car got stuck in 1st, and when you shifted to second, the link broke. Not too clued up on your car, but you probably need to drop the gearbox. On some cars you can take out the shifter without having to drop the box and still see if the link is broken. Good luck

Mar 18, 2009 | 2006 Mitsubishi Colt

1 Answer

HELP the cluch on my 1993 VW golf is haveing problmes


From what I am gathering. the pedal and cable assemblys are ok. then it is time to tear into the clutch its self. Sounds like the throwout bearing is bad.

Jan 29, 2009 | 1999 Volkswagen Golf

1 Answer

Cant change gears


IF THE PEDAL IS LOW CHECK FOR AIR IN THE SYSTEM. IF THATS NOT THE PROBLEM YOU WILL HAVE REPLACE THE CLUTCH MABY A COLLAPSED PRESSURE PLATE

Nov 19, 2008 | 1984 Toyota Corolla

Not finding what you are looking for?
2000 Hyundai Accent Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...