Question about 1996 Cadillac Eldorado
U need to jack the rear up enough in order to get a floor jack with a piece of plywood cut a Little smaller then the size of the tank, remove as much gas as u can with a siphon, take the fuel lines apart, located in the area of the fuel filter in front of the left tire, disconnect the screws around the gas filler pipe inside the fuel door,remove the filler and over flow hoses, at the tank,just get them loose and when u remove the tank straps with the plywood in place on the jack under the tank u can maneuver the hoses off as u let the tank down, also before u begin release the gas pressure at the fuel rail,looks like the end of a air value stem,be sure to replace the short wiring harness at the gas tank, its only 6-8inches long,its a must, install in reverse, pick up a Haynes motor manual. good luck to u..
Posted on Mar 09, 2009
Tips for a great answer:
Aug 26, 2015 | 1988 Cadillac Eldorado
Mar 30, 2015 | 1996 Cadillac Eldorado
Feb 26, 2015 | Cadillac Eldorado Cars & Trucks
Dec 26, 2012 | 1997 Cadillac Eldorado
Feb 05, 2011 | Cadillac Eldorado Cars & Trucks
Sep 03, 2010 | 1996 Cadillac Eldorado
Jul 11, 2010 | 2000 Cadillac Eldorado
May 19, 2010 | 1990 Cadillac Eldorado
Feb 12, 2010 | 1999 Cadillac Eldorado
160 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: