Question about 2000 Mazda Protege

1 Answer

Replacing 2 belts on a 2000 Mazda Protege

The alternator and power steering belts on my protege need to be replaced. Anyone know how to do it?

Posted by on

  • eho1957 Apr 20, 2009

    I HAD MY MECHANIC CHANGE THE BELTS ON MY 2000 PROTEGE BUT HAVE A TERRIBLE SQUEAK. THEY WERE
    TIGHTENED CORRECTLY. WAS TOLD ONE OF THE PULLEYS
    MAY BE BAD.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 423 Answers

I recommend that you go to any Auto Parts store and by a repair user manual for your 2000 Mazda Protege.  They have pictures and arrows and stuff that you will need to do the whole job.  The non-Mazda version will cost approximately $15.00.
Because of the tensioner that may come off when while you are doing these belt changes, it is too complicated to talk you through this.
But with the manual, I am confident you can change them.

Posted on Apr 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When replacing the alternator belt on a 1999 mazda protege how many pullys does it go around. cause i dont know if this belt is to long


There are 2 belts. One goes around the Crankshaft. the Power Steering Pump and the Air Conditioner Compressor (if equipped) and the other belt goes around the Crankshaft, The Alternator and the Water Pump. You can have your local parts supplier verify that you have the correct belt for the vehicle by calling them and giving them the number on the belt. Also make sure that you are installing the belt in the correct position. i.e. putting the alternator belt on the alternator and not on the power steering, etc.

Mar 26, 2011 | 1999 Mazda Protege

1 Answer

How to remove a/c belt on a 2000 mazda protege


pretty easy, loosen the power steering on top and bottom, then there is a long bolt sideways on top of p/s pumy crank it in or out whichever loosens replace belt and repeat opposite steps to tighten

Feb 27, 2011 | 2000 Mazda Protege

1 Answer

How to replace the drive belts on a mazda protege 2000


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

CLICK on the following LINK. It has several Belt Diagrams, one which will match your specific (AC/No AC, Power Steering, .etc) that you will need.
http://www.2carpros.com/car_repair_information/year/2000/make/mazda/model/protege/2000_mazda_protege_drive_belt_routing_diagram.htm

REGARDING HOW:
This depends on your particular Engine and Options (as you see with the numerous Diagram Options.)
Let me know which Diagram (they have numbers next to them) and I can give you a step-by-step instructions.

Feb 06, 2010 | 2000 Mazda Protege

1 Answer

What are the timing marks for a 2000 Mazda protege 1.8L


I assume you are replacing the timing belt, so just wactch the youtube video at the link 1999 03 Mazda Protege 1 8L 2 0L timing belt replacement pt 1

Sep 30, 2009 | 2000 Mazda Protege

1 Answer

Need diagram for timing belt for 1991 mazda


here you go buddy

http://forums.mazdaworld.org/index.php?showtopic=25269

http://www.2carpros.com/forum/1994-mazda-protege-replacing-a-blown-head-gasket-vt206242.html

http://www.2carpros.com/forum/2000-mazda-protege--my-timing-belt-broke-again,-oil-pressure-vt253721.html

http://www.blurtit.com/q298393.html

hope this helps.

thanks,

voodoo

Aug 09, 2009 | 1991 Mazda Protege

1 Answer

How do you replace the alternator belt on a 1993 mazda protege? Do you have to remove the outside belt? If so how is that belt removed?


JUST LOOSEN THE BOLTS OF THE POWER STEERING PUMP TAKE OUT THE BELT FOR THE PUMP THEN REPLACE THE ALTERNATOR BELT AND STEERING PUMP.

Jul 28, 2009 | 1993 Mazda Protege

2 Answers

1994 mazda protege alternator belt


LOOSEN BOTTOM NUT ON POWER STEERING PUMP THEN REMOVE BELT

Jul 17, 2009 | 1994 Mazda Protege

2 Answers

Replace alternator belt 97 mazda protege


Here's the page from the AutoZone online manual for replacing drive belts.

Mar 10, 2009 | 1998 Mazda Protege

2 Answers

2000 Mazda Protege replace belts


change the new attentioner,u can,t tight

Nov 29, 2008 | 2000 Mazda Protege

Not finding what you are looking for?
2000 Mazda Protege Logo

844 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...