Question about 1994 Chevrolet S-10 Blazer

1 Answer

Car won't turn over, where is the ignition switch located on a 1994 s10 blazer,battery is good.when you turn the key nothing happens.is there a safty switch somewhere in steering column?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 300 Answers

Youve got to remove the steering wheel, take the locking mecanism off, then the mecanism for the signal lights off....whitch should only have a few screws.....then where the ignition switch is.....you should see a screw that looks like it goes through the switch..remove that then give the ignition switch a tug or two and it should come out 

Posted on Mar 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keys stuck in the on position and no power


I had the same problem with my S10 blazer. The ignition needs
replaced, or the nutral safty switch needs replaced.

Jul 25, 2012 | 1999 GMC Jimmy

1 Answer

No power to truck, key locked in ignition


Is the battery dead? try charger, battery is okay but when you turn key nothing happens and key is jammed? Key won't turn? not much information you provided, but if key not working and battery is good sounds like the ignition cylinder has failed and needs replacing, i would not recommend for a novice as dis-assembly is and reassembly is not easy and requires a few special tools and if mistakes are made could attivate air bag, deactivate air bag or short electronic components

Jun 09, 2012 | 2005 Chevrolet Blazer

1 Answer

97 chevy s10 wont start


Then the problem is likely the ignition switch, or the neutral safety switch. Try jamming it into park a couple of times to see if it helps. If it does, you will need to change the neutral safety. If it doesnt, probably going to need an ignition switch. Those trucks, jimmys, and blazers are famous for ignition switch problems.

Feb 06, 2012 | Cars & Trucks

1 Answer

1997 s10 blazer no-start, possible ignition switch, how do i trouble shoot?


If the car does nothing at all when you turn the key, the first thing to do is make sure the battery has sufficient voltage. Do this by turning on the headlights. They should be very bright. If the battery is good, check all connections between the battery and the starter, check for blown fuses. If everything checks out ok, then you need to make sure the starter is good. This can get a little tricky if the starter is hard to reach. With the car in park or neutral, parking brake on, turn the ignition key on, locate the starter. At the back of the starter, there will be some wires connected. The large red wire is coming from the battery. What you need to do is take the screwdriver and touch it to the connection and at the same time, make contact with the engine block. Avoid touching the threaded part of the connection. When you do this there will be some pretty good sparks, so don't be startled. As long as you hang on to the screwdriver by the plastic handle, it can't harm you. If the starter is good, it will engage and start the engine. The problem would be in the ignition switch, or more likely, in the starter relay in the main fuse box under the hood. If the starter doen't engage after a couple of tries, it should be removed and tested.

Dec 22, 2010 | 1997 Chevrolet Blazer

2 Answers

Trying to locate the ignition module for chevy blazer s10 1994


Ignition module sits in the ignition distributor, remove distributor cap, there will be two elec. harness plugs, the one with two wire's is for the pick up coil, the other one is for the ignition module, just unscrew module out of distributor and install new one.

Sep 23, 2010 | 1994 Chevrolet S-10 Blazer

3 Answers

When i turn the key I get no dash lights, 97 blazer


I had the same exact thing happen to me, I have a 97 blazer and after hours of screwing around with it and several different options... it turned out to simply be the ignition switch.

Feb 07, 2010 | 1997 Chevrolet Blazer

1 Answer

Turn key nothing happens all lights work fine,is there an ignition safty somewhere?it's a 1994 s10 blazer


have it checked at a auto parts store for any faults but im sure replacing the starter could fix maybe fix it

Mar 06, 2009 | 1994 Chevrolet S-10 Blazer

2 Answers

Wont go in 4x4 please help 1994 s10blazer


I'm no expert but you might replace either the motor or the actuator... i'd replace the actuator first though because i have heard of this problem alot with electronic transfer cases on the blazer series... and it might not be too bad of an idea to check the fluid in the transfer case.. i too have a 1994 s10 Blazer but i have yet to have an issue with the 4-wheel drive

Nov 22, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...