Question about 1998 Chevrolet Cavalier

1 Answer

My 2006 Corolla ABS+hand brake light is on after i start the car and keeps showing is it on. What might be the problem?

Posted by on

  • shahrears Mar 06, 2009

    My machanic told me that my brake pads are torn and need to replace pad / shoe for all the wheels. 

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 106 Answers

Any time you have an ABS problem the red brake light will also light up.Not sure but it could be that you just have a bad wheel speed sensor.There is a wheel speed sensor at each wheel.A quick scan of the ABS computer will tell you this.Let me know if this helps or if you have further questions.

Posted on Mar 06, 2009

  • Mark Nichols
    Mark Nichols Mar 07, 2009

    Ok,Let me know if this takes care of your problem.Thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs light shows on the dashboard, i inspected all the four sensors connected to the wheels and seemed well what can be the problem?


is it the abs light or the brake light there is a low fluid level sensor it is the same light as if the parking brake was on the other actual abs light could be a speed sensor

May 21, 2012 | 1998 Toyota Corolla Sedan

1 Answer

I have a toyota nze it has aproblem of showing hand brake light and abc.please help.


Hi there!

The brake light is always an indication of low fluid level or low pressure in the fluid system. The ABS light comes on when a problem detected with one of the 4 sensors or wires that connect the sensors to PCM in your vehicle. So what you can do is check the fluid level and about the ABS you will need to scan it to see whats the code that was stored. Good luck

Jul 16, 2011 | 2002 Toyota Corolla

1 Answer

I have a 2006 Toyota Corolla. After 5000 miles without an oil change the "Maintenance Required Light" turns on. After getting an oil change, the light will stay on unless someone does something...


1) Get into the car and close the driver's door

2) Put your key in the ignition, but don't turn it.

3) With your left hand, press and hold the odometer reset button (its somewhere near the odometer)

4) With your right hand, turn the key to the position right before start while still holding down the reset button with your left hand.

5) While still holding the reset button, you will see your odometer show up as 000000, keep holding the button until all the zeros disappear.

6) After all the zeros are gone, your odometer will show back up and the "Maint REQ" light will go away.

If you need more detailed instructions, consult your owner's manual. The procedure is outlined there with pictures.

Apr 01, 2011 | 2006 Toyota Corolla

1 Answer

My car Toyota corolla 2003 VVTi was envolved in an acccident.Now after repairs on the dash board is showing engen light,ABS light and Hand brake light.How do i clear these indications because everything...


The accident caused a possible short circuit in the circuit and wires serving the ABS ,Engind and hand brake light system best to get checked by a Auto Electrician

May 17, 2010 | 2003 Toyota Corolla

1 Answer

ABS light show problem free Solution


Hi:
The ABS light is telling you that your Anti Lock Brake sytem is not working, due to a malfunction. Usually this is caused by a wheel speed sensor, but you need to download your car's codes to find out for sure. Most auto parts stores will do this for you free of charge.
You will still have your normal braking system, but it should be a good idea to check your brake fluid level to make sure you have no leaks.

Mar 18, 2010 | 2005 Toyota Corolla

1 Answer

In my 2009 corolla s, my abs and brake indicator lights keep turning on and off during multiple driving trips. sometimes, when i start the car, the lights are on, then when i'm driving, they turn off. ...


I have a 2009 LE and the abs & brake warning light came on. Took it to the dealer, it is a known problem on some corollas. They ordered a speed sensor ($650) which is covered on the 60K warranty. The light went off the next day (part is not yet installed).

Jan 30, 2010 | 2009 Toyota Corolla

1 Answer

Desh meter lights


Regarding the corolla abs light, you need to get your local dealer to diagnose the fault, it is possible a wheel sensor giving a faulty reading but while the abs light remains on you have no abs. Worth getting it looked at promptly

Jul 29, 2008 | 2006 Toyota Corolla

Not finding what you are looking for?
1998 Chevrolet Cavalier Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...