Question about 1995 Toyota Camry
The engine cranks, but does not turn on, checked for spark, no. is there a way i can test the coil, module, other ignition related parts...Thanks
SOURCE: 1995 camry has no ignition fire
I think for sure that the timing belt has jumped a tooth. This can happen if your water pump, or your idler pulley, which are driven by the timing belt, "locks up" for a second. Best advice: replace the timing belt (you should not "reuse" it, as once it slips a tooth, that tooth is now weakend. Also, check the feel of the water pump impeller-gear...if it feels gritty or does not spin freely, replace the water pump while you are in there. It's not much more work. Also check the IDLER pulley for the same feel. If it feels bad/does not spin free, replace it. One or the other caused your problem.
Let me know how it turen out.
Posted on Nov 29, 2008
light flashes when comp. picks up a skip pull code and it will be po300 random miss p0301 p0302 p0303 p0304 all are for that # cyl that has the miss best bet change wires and plugs check for oil on wire to plug end in spark plug hole leaking valve cover gasket or spark plug tubes...
Posted on Dec 31, 2008
Tips for a great answer:
Mar 08, 2015 | 1995 Toyota Camry
Dec 14, 2014 | 1995 Geo Metro
Apr 18, 2014 | 1995 Toyota Camry
Feb 22, 2014 | 2006 Toyota Camry
Mar 10, 2012 | 1995 Toyota Camry
Dec 29, 2009 | 1995 Ford Explorer
Dec 07, 2009 | 1997 Toyota Camry
Jan 22, 2017 | 1995 Toyota Camry
99 people viewed this question
Usually answered in minutes!