Question about 1992 Chevrolet K1500

2 Answers

When the headlight switch is turned on the lighs dont come on

When the switch is turned on all of the other lights come on: the parking lamps, tail lights, reverse lghts, intstrument and panel lights all work. the headlights will not turn on with the low or high beams on.

Posted by on

  • nickofirelan Mar 06, 2009

    it is a 92 c/k1500. the weird part was that after a period of time, probably 15-20 min, the lights were on. i had come inside and left the switch on and when i went back outside they were on.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

It sound loke you have a bad earth at the head lamps

Posted on Mar 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 158 Answers

You could have a blown head lamp fuse , bad earth at the head lamps or the switch could be u/s what sort of car is it

Posted on Mar 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Relay fuse for park lamps on 2004 Buick Rendevous. Where is it located?


Park, Tail and Marker Lamps
The park, tail and marker lamps, including the license lamps, are turned on when the headlamp switch is placed in either the PARK or HEADLAMP position, or anytime the headlights are requested. The PARK LPS fuse in the underhood fuse block, supplies battery positive voltage to both the park lamp relay switch contacts and park lamp relay coil circuit. The park lamp relay coil is controlled by the body control module (BCM). When the headlamp switch is placed in the PARK position, the BCM will then energize the park lamp relay coil control circuit. Current flow is now from the park lamp relay to the park/tail lamps. The front park lamps are grounded at G100 and G101. The rear park lamps are grounded at G401 and G402. The license plate lamps are a part of the rear park lamp circuit and are grounded at G401. The inadvertent power control feature prevents the park lights from remaining on more than 10 minutes if left on. If the park lights are turned on after the ignition switch has been turned OFF, or is in the ACCY position, they will remain on until turned off or the battery runs dead.

20
PRK LPS
15A
PRK LPS Relay 55 under hood fuse box . Should have diagram on inside of the fuse box lid .

Feb 22, 2017 | Buick Cars & Trucks

2 Answers

Keep blowing tail light fuse 45 on my 2002 Pontiac Grand Am?


There is an issue, you have a dead short in the circuit, no quick fix for this. You must first get a wiring diagram of the entire circuit and then follow it until you locate the shorted wire or component.

Sep 12, 2016 | 2002 Pontiac Grand Am

1 Answer

2000. Where is fuse for tail lights?


Do your headlamps work ?
Park/Marker/License/Tail Lamps
Voltage is applied to the turn/headlamp switch at all times. When the turn/headlamp switch is in the PARK or the HEAD position, voltage is applied to the following components:
?€¢
The park lamps


?€¢
The marker lamps


?€¢
The tail lamps


?€¢
The license lamp

The front marker lamps are grounded through the turn filament of the respective front park/turn lamp. The front marker lamps light as a result.
The automatic lamp control function turns on the park lamps and the headlamps. This action occurs when the ambient light sensor determines that the exterior lamps should be turned ON based on the amount of available light. When the BCM grounds the park lamp relay, voltage is supplied directly to the park lamps, bypassing the turn/headlamp switch assembly. When this action occurs, the following conditions exist:
?€¢
The automatic lamp control relay is grounded.


?€¢
The headlamps turn ON. Refer to Headlights/Daytime Running Lights (DRL) Circuit Description .

The lamps turn OFF when the BCM does not ground the park lamp relay or the automatic lamp control relay. This action is caused by the following conditions:
?€¢
The available light reaches a predetermined level.


?€¢
The ignition switch is turned to the OFF position

Mar 31, 2016 | Pontiac Grand Am Cars & Trucks

2 Answers

I have a 2007 Chevy HHR..the tail light don't work the bulbs workI have turn signals and brake lights..no owners manual in car. check fuses can't locate the fuse for tail light is there another place


Your talking about the rear park lamps, but, do the front park lamps work?
Note the picture.
Underhood fuse box, 68 is park lamp relay, 69 is park lamp fuse.
26139691-ogmtu0xiyqttvnd1jjcu4dmt-2-0.jpg

Mar 23, 2016 | Cars & Trucks

1 Answer

The instrument panel cluster,tail (driving) lamps,& license plate lite do not lite. fuses 9,14,20 are ok. what else could be bad or broke?


Check fuse's #19 ,# 6 #4 check grounds 105 & 107
G107 In the left rear of the engine block next to the knock sensor. G105 In the thermostat housing
The park, tail, marker and license lamps are turned on when the headlamp switch is placed in the PARK or ON position or anytime the headlights are requested. The PK LPS fuse in the IP fuse block supplies battery positive voltage to the park lamp relay and the headlamp switch. The body control module (BCM) provides a ground, or control circuit, to the park lamp relay coil circuit during ALC operation. When the park lamps are turned on during ALC, the BCM energizes the park lamp relay. The park lamps can also be supplied battery positive voltage directly from the headlamp switch. Current flow is to the park, tail, marker and license lamps. The front park and marker lamps are grounded at G100 and G101. The rear park, tail, marker and license lamps are grounded at G400 and G401. If the headlight switch is left in the ON position, the park, tail and marker lamps will remain on until turned off or the battery runs dead.
Check the headlamp switch !

Oct 29, 2015 | 2005 GMC Safari Passenger

3 Answers

Why the brake light works and tail light don't work Chevrolet avalanche 2003


they are dual filament bulbs so the tail light filament might have blown and not the stop light , replace the bulb to check

Jul 18, 2014 | 2003 Chevrolet Avalanche

1 Answer

Tail lights dont work but the brake lights do


does your car have DRL option (canada) daylight running lights?)
my answer will be, non export jeep. USA jeep, no one ever says !!!!
the tail lamps are not brake lamps.
they are independant.
there are many parking lamps , and the tails are that.
do all parking lamps fail>? see FSM page 8w50-2
the tails run directly to the park headlight switch pin, marked park.
which gets power from fuse 34
the same switch and pin runs all other park lamps and same fuse 34.
so if the fuse is good, then all lamps are burned out , nah.
or the switch is bad, and can due to so many lights for so long.
if lamps are not dim then here is no short, so must be an open
Fuse 34 tops list , use an ohmeter to test the fuse. or replace it
as , they can get hair line cracks. inside fues
0 ohms = good, infinity = bad fuse.

Feb 08, 2014 | 1997 Jeep Grand Cherokee

1 Answer

My 2002 ford ranger running lights and instrument panel dont work


12V power passes through 15A fuse 33 (the one that keeps blowing?) in the battery junction box and on to the main light switch. When the main light switch is set to PARK, 12 volts is routed via the BRN lead to the park filaments of the dual park/turn lamps. These lights remain on when the headlight switch is turned to HEAD.

The main light switch gets its 12V input from 7.5A fuse 11 in the central junction box and the same 15A fuse (33) identified above. When the main light switch is set to PARK, 12 volts is routed via the BRN lead to the instrument panel dimming module and module output is applied to the panel illuminating lamps.These lights remain on when the headlight switch is turned to HEAD.

The input to fuse 33 is hot all the time so should read 12V. If you read 12V at the TAN/WHT connection with the fuse out, something is definitely not right. I'm sure you have noted that the fuse is common to the non-functioning circuits you mentioned.

Sep 14, 2012 | Cars & Trucks

Not finding what you are looking for?
1992 Chevrolet K1500 Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...