I turned the on and off three times. the check engine light blinks three times then five times.
SOURCE: How can i check the code for the check engine
Turn the ignition switch on off on off on off on. After the third time the check engine light should start blinking codes. It will start with 12. That is the start of codes code. It will end with 55. That is the end of codes code. You just want to know what codes are inbetween 12 and 55
Testimonial: "Thank you for your help, it was an o2 sensor that was my problem. I REALLY appreciate your response. "
SOURCE: to read a check engine
Hello Steven.
That reads code 12 and 55.
12 is power disconnected to computer in the last 50 key starts.
And 55 is end of service codes.
Neither one of those codes will turn on the check engine light.
If the power is interrupted to the computer when you turn off the key the codes stored will be erased.
So the code has been erased and no longer stored or you have a key off power supply issue to the computer.
If you need further assistance on this, ask me here.
Thank you for using FixYa.
KL
258 views
Usually answered in minutes!
×