Question about 1994 Chevrolet S-10 Blazer

1 Answer

Vacuum locations do you have a pic of the locations of all the vacuum lines including the one on the transfercase for a 1978 s10 4x4 pickup with a 2.8 liter motor? just put motor in and can't find where all the vacuum lines go.help. thank you dave

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 110 Answers

Good afternoon and welcome to fixya
not sure if someone else has already helped you yet. if not then a couple of questions for you. one what year and model vehicle is this? there was never a 78 s10 made they started in late 81. your write up says 78. last question is a major one, is the vehicle a california vehicle, the vacuum routing and lines are completely different then any of the other states. welcome to smog control. let me know so i can help you out, if you already got help then great, and good luck.

Posted on Mar 12, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevy transfercase I have 1995 2 door cab 2500 what years will work


gmc and chevy k1500 pickup and suburban years 95-99
k2500 pickup years 95-98
k2500 suburban 95-96
gmc k2500 and yukon 95-98
I hope that helps if so please rate my answer

Dec 26, 2014 | 1995 Chevrolet C2500

1 Answer

1978 chev motorhome brakes are hard to push down to stop


If they are standard power brakes, check the vacuum booster. The diaphragm may be broken. If it holds a vacuum it's OK. If the brakes run through the power steering pump, make sure the belt is tight and the steering is smooth.

Jun 29, 2014 | 1998 Chevrolet S-10 Pickup

1 Answer

My 4 wheel drive kicks on without switching to it


there is a vacuum switch located on the top of your transfercase. it probably needs replaced.you will see four vacuum lines stickin straight up. its a bugger to get at and requires a flexhead ratchet. keep the band aids handy you will use a couple.

Nov 21, 2012 | 2003 Chevrolet Tahoe

1 Answer

Where is the vacumn line for the four wheel drive


vacuum lines goes to vacuum switch on transfercase.

Sep 28, 2012 | 1996 Chevrolet Blazer

1 Answer

I am having problems locating the fuel filter on a 1978 chevy sera pickup. Can you tell me how to find it?


most likely is underneath vehicle ,i would raise the car and follow my gas lines from the tank to the motor you will run into the filter good luck

May 20, 2011 | Chevrolet 1500 Cars & Trucks

1 Answer

95 gmc jimmy transfercase is working but not locking front hubs what could the problem be?


There is a vacuum switch that is located just above the drive shaft that comes out of the transfer case that usually goes bad. Also check and make sure the vacuum lines are all good.They go to the actuator which is located under the battery box.The vacuum switch is just a plunger type.You can remove it with a 7/8 wrench I believe.You should be able to push the plunger in with your fingers and it should push in and out fairly easy.What usually happens is it sticks in.The vacuum line connector attaches to this switch.There are 3 vacuum lines on this connector.Hope this helps.Let me know if you need more help.Good luck.

Jan 29, 2011 | 1995 GMC Jimmy

1 Answer

Vacuum diagram for 78 chevy c10 pu 250 inline 6


1978 Chevrolet Truck C10 1/2 ton P/U 2WD 4.1L 1BL 6cyl

zjlimited_881.jpg

Fig. 14: Vacuum hose schematic - 1978 250 engine, light duty emissions (except California)

zjlimited_882.jpg

Fig. 15: Vacuum hose schematic - 1978 250 engine, light duty emissions (California)


Hope helps (remember to rate this answer).

Oct 08, 2010 | Chevrolet 1500 Cars & Trucks

1 Answer

What transfercase goes behind the trans, is the


New Process, should be on drivers side.

Mar 07, 2010 | 1995 Chevrolet C1500

1 Answer

I need the emission component and vacum hose


you can go to libary look up the information in chiltons book just make a copy of that page for vacuum hose diagram

Oct 20, 2009 | 1978 Chevrolet C1500

2 Answers

Transfercase control module


I fould my yhis morning. I have 1997 GMC Suburban the Transfercase Module on my is Driver Side under Dash Left of Steering Column. Rectangle Silver box approx.5" long white connections. Good luck getting to it took me quite a while. There are 2 Screws on bottom of Module and 1 tab on top that is difficult to unhook. Where is the Shift Motor on Transfercase.

Mar 13, 2009 | 1998 Chevrolet Tahoe

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...