Question about 2007 Ford Ranger FX4 Off-Road

3 Answers

Hi there,i need to get a copy of Ford Ranger 2007 parts and services is a automatic car..below are the spec.. 1 WHITE MNCLS3E928W708610 W708609 FORD RANGER 3.0 CFS060902 > 4DR 4X4 AUTOMATIC 2007 4CYL DIESEL (T) > 2 WHITE MNCLS3E938W711886 W711886 FORD RANGER 3.0 CFS060902 > 4DR 4X4 AUTOMATIC 2007 4CYL DIESEL (T) > 3 WHITE MNCLS3E988W711866 W711866 FORD RANGER 3.0 CFS060902 > 4DR 4X4 AUTOMATIC 2007 4CYL DIESEL (T) > 4 WHITE MNCLS3E998W712363 W712363 FORD RANGER 3.0 CFS060902 > 4DR 4X4 AUTOMATIC 2007 4CYL DIESEL (T) thanks..

Posted by on

  • 5 more comments 
  • peter evan Apr 05, 2009

    i need a menul as well cheers

  • Anonymous Mar 15, 2014

    automatic trans won't stay in o/d and drops out of 3 gear

  • Anonymous Mar 24, 2014

    how to set up timing

  • Anonymous Mar 24, 2014

    timing diagram for a 2007 ford bantam 1.8 diesel

  • Anonymous Mar 24, 2014

    diagram to replace cambelt on a 2007 ford bantam 1.8 diesel

  • Anonymous Mar 25, 2014

    engine won't start

  • Anonymous Mar 28, 2014

    Oil Capistrano



3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Ford Master
  • 552 Answers

Check out

Posted on Mar 29, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It would really help me if you could email it to me as well, thanks :)

Posted on Jun 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.


    An expert whose answer got voted for 20 times.

  • Expert
  • 103 Answers

What wood you like to no i have the books

Posted on Apr 07, 2009

  • peter evan Apr 11, 2009

    i can email you the book you need to print it out cheers


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

On my 2000 ford ranger, the plug that snaps im

There's this website
They have books on ALL vehicles.
it covers
wiring diagrams, electrical diagrams,
fuse diagram, torque specs, PCV, error codes, fault codes, service info, repair info, parts info, owner's/service/repair/parts/maintenance manuals etc everything totally..
I have 1987 toyota 4runner model and I keep servicing and when needed repair it on my own. worth it !!!

Mar 16, 2018 | 2000 Ford Ranger SuperCab

1 Answer

Cylinder head and big ends torque settings for ranger 3.0 tdci ( we enjin )please

You will get your solution and all info on service info, repair info, parts info, wiring/electrical/fuse diagrams, error/fault codes, torque specs, PCV,
owner's/service/repair/parts/maintenance manuals
etc everything
this website
it's a very good website for vehicle problems even as old as 1991 ford..

Feb 27, 2018 | Ford Ranger Cars & Trucks

1 Answer

Timming specs for94 ranger at what degree do you set timming?

Hey S. Arnold, 1) 4cyl 2.3L is 10 deg. 2) 6cyl 3.0 =10 Degrees Special procedures are required for proper adjustments refer to emissions label (Under hood) or service manual , 3) 6cyl 4.0L 10 deg. all are BTDC , hope this answers your question if this helped please check box below (helpful).
Thanks Woody.

Nov 01, 2014 | Ford Ranger Cars & Trucks

1 Answer

I need to buy a new carburetor but i dont know what carb to order its for a 1984 ford ranger its a single cab with automatic trans and v-6 engine dose anyone know what carb i need to order ? thanks for...

The 1986 Ranger V-6 was a 2.8L 170.4 cu or 2792 cc.
The carb for this engine was a 2 BBL Model 2150, E37E-AEA (Will not cross except for re-build kits!)
The Holley remanufactured PN is 645544

Autozone lists 3 carbs... one for manual trans one for auto trans and one other:
Auto trans below....

NAPA lists the Holley reman... 645544

Thanks for choosing FixYa,

Apr 27, 2011 | Ford Ranger Cars & Trucks

2 Answers

How much does a 2005 Ford Ranger fuel pump cost?

hi go to this site it seems to be reasonable for parts for ford rangers...hope this helps please vote thanks...just click link below

Jun 09, 2010 | 2005 Ford Ranger

2 Answers

Timing spec for 1989 ford ranger 2.3 engine

Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at

Mar 20, 2010 | 1989 Ford Ranger

3 Answers

What kind of transmission fluid for 2003 ford ranger manual 5 speed

DONT USE GEAR OIL IN A MANUAL TRANSMISSION. it will blow your seals out. the gear oil is too heavy and will block passages in the tranny

Nov 30, 2009 | 2001 Ford Ranger Regular Cab

1 Answer

Need torque specs for oil pan bolts

torque specs for these bolts can be found in a Haynes or Chilton manual availiable from your local parts store, or maybe at your local library, however these bolts are usually no more than 14 ft pounds, unlike cylinder head bolts, the bolts do not need to have any stretch factor to hold the oil pan gasket in place or sealed.

May 17, 2009 | 1997 Ford Ranger SuperCab

1 Answer

Torque specs for valve cover

not sure there is such a thing. I've never seen anybody use a torque wrench on valve cover bolts. Just use a nut driver (screwdriver type) or a 1/4 inch drive ratchet, and tighten as much as you can. They don't need to be very tight.

May 04, 2009 | 1994 Ford Ranger Supercab

1 Answer

2007 Ford Ranger

Hi, I also own a 2007 Ford Ranger. That's the TPMS light. It's telling you the tire pressure is low. Check the tire pressure and if make sure it's where it needs to be (there's a sticker in the door jamb that tells you what the tire pressure should be set to.

Oh, and I found a PDF copy of the 2007 Ranger owners manual here -

Dec 15, 2008 | 2007 Ford Ranger FX4 Off-Road

Not finding what you are looking for?
2007 Ford Ranger FX4 Off-Road Logo

Related Topics:

914 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

5685 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides