Question about 1994 Ford Mustang

1 Answer

Fog lamps the fogs lamps wont turn on and the switch that normally lights up also no longer works. i checked the fuses but still nothing. any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,066 Answers

A bad relay is your most likely cause.  It's inside the fuse box.

Posted on Mar 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Fog lights wont work


Ryan, Does the fog light indicator on dash light up when you pull out the fog lamp switch? Also, Are you aware the fog lights won't work when high beam is on?

Mar 05, 2014 | 1999 Dodge Stratus

1 Answer

High beam indicator comes on with fog lights


Could your Mazda have daytime running lights? If you checked all fuses, did that include the three in the joint box?

There is an auto light-off control module that is central to all functions you describe. It is assumed that you would only turn on the fog lights with headlights on and set for high beam. If you set the headlight switch to LOW, the module closes the headlight relay to turn on the low beams. If you then turn the headlight switch to HIGH, the module turns on the high beams and allows you to turn on the FOG LIGHT switch, closing the fog light relay and turning on the fog lights. Since this sequence is not working, I suggest checking both high beam lamps as both could be burned out. Other possibilities are a defective headlight switch or the module

Oct 01, 2012 | 2005 Mazda 6

1 Answer

I have a 2001 jeep grand Cherokee Laredo that did not come with fog lights but has the plugs for the bulbs. I purchased the fog lights plugged them in but they didn't turn on. I was wondering if there...


If this vehicle came prewired, and all you had to do was plug in the fog lamps, then 50A fuse 7 in the power distribution center would be hot at all times, applying power to 15A fuse 24 and the fog lamp relay. Setting the left multifunction switch to FOG causes the body control module to close the fog lamp relay and turn on the fog lamps. It is possible your Jeep came prewired but without the fuses and relay so a dealer could install them to make your fog lamps work. You can check whether the fuses are in the box and OK and whether the fog lamp is installed or just an empty socket. Once everything has been checked and any missing parts installed, your fog lights should work.

Sep 18, 2012 | Cars & Trucks

2 Answers

My fog lights are not working, the relay is fine but not sure where the fuse is? Don't want to buy a service manual for this one simple thing. It does not tell you in the manual.


I have a 2004 f150 xlt triton. I couldn't figure out the how to turn on the fog lamps and the manual was not helpful.

Solution: turn the light switch all the way to the right and pull the switch (out) towards you. Push switch in and it turns off. The manual says to turn switch all the way to right but doesn't say to pull switch out.

Aug 25, 2010 | 2004 Ford F150

1 Answer

Fog lamps dont work i check fuses and relay the switch shows the fog lamps are on


If you have not replaced the headlamp with HID, the next thing, are the high beams on ?

If you turn the high beams on, the indicator lamp on the main headlamp switch should go out.

Next thing would be to check the fog lamp relay in the fuse panel ( passenger side kick panel by the fuel inertia switch ).

The fog lamp relay is a half size ISO relay, you should be able to swap with the trailer tow parking lamp relay ( R201 ), to test with.

The fuse you checked is the F17, the fog lamp fuse for Relay R202, correct ?

Nov 26, 2009 | 2006 Ford F-150

1 Answer

Fog lights do not come on either when using headlights or with the fog lamp switch in my 2002 Grand Am SE. Fuse seems to be fine.


REPLACE THE FOG LAMP SWITCH DOWN ON THE STEERING COLM. REMOVE THE PROTEC. PANEL UNDER STEERING COLM. AND GENTLY START TO LOWER THE COLM. WATCH OUT FOR THE SHIFT IND. WIRE- REMOVE IT- LOWER COLM. AND HALF WAH DOWN ON THE TOP SIDE IS THE SWITCH FOR THE FOG LAMP CONTROL IF YOU HAVE ALREADY REPLACED THE ELEC. SWITCH - (PUSH BUTTON OR ROCKER STYLE ).IN THE DASH. IF - - LIGHTS AREON AND THE FOG LAMPS ARE TURNED ON AND THE HEAD LIGHT GO OUT OR WONT CHANGE FROM DIM TO BRIGHT REPLACE HIGH/LOW SWITCH ON COLM. SAME PROCEDURE AS FOG CONTOL SWITCH.

Nov 05, 2009 | Pontiac Grand Am Cars & Trucks

2 Answers

My headlights on bright and fog light is not working. I have changed the bulbs and they still don't work. The fuses seem to look okay. What else should I look for? Do they have another fuse or circut fuse...


Most fog lights turn off when you put your brights on. Check their operation in normal mode first, if they turn off when you turn your brights on... this is normal.

To disable this you need the wiring diagram for your car, you will have to cut 1 wire to be able to have all your lights on at the same time.

Nov 04, 2009 | 2000 Pontiac Grand Prix

1 Answer

How to factory wire fog lights on a 2000 ford f150. pig tail, relay, and fuse are there. Only no wiring from fuse box.


This is a common problem on 97-00 MY trucks, regardless of the trim level ( XL, XLT, Lariat ).

If you install the fog lamp fuse in the BJB ( aka Battery Junction Box, Engine Compartment fuse panel ) Fuse # 9 ( 15 A fuse ) and jumper the normally open contacts in the fog lamp relay socket ( see diagram below ) the fog lamps should illuminate ( to confirm what you have doing on ).
8491ddd.jpg
The problem usually is the main headlamp switch to the BJB is not in place ( this is the yellow wire from the main headlamp switch connector to the relay socket pin #1 ).
One easy route is to make an aux lighting relay & harness, or purchase one online. With this, you can cut the factory ends and attach them to the harness you purchased. There is an air inlet next to where the steering wheel column runs through the firewall. This would give you an easy route to the fog lamp switch. The fog lamp switch, you can buy the factory one, and change the yellow wire from the connector to your added relay, or just add a switch for this function.
This will give you an idea of what the DIY relay and harness would look like.
5954a15.jpg

Hope this helps, more than confuses at this point

Sep 16, 2009 | 2000 Ford F150 Flareside SuperCab

3 Answers

2001 1/2 Passat... fog lights & Cruise Control


to turn on the fog lights, its the same switch that you use to turn on your head lights. Turn the dial to the right to turn on your head lights and then pull it towards you. thats how you turn your fog lights on

Jul 04, 2009 | 2001 Volkswagen Passat

Not finding what you are looking for?
1994 Ford Mustang Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...