Question about 1997 Pontiac Grand Prix

1 Answer

Fuse box diagram 2001 Pontiac grand prix - 1997 Pontiac Grand Prix

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 36 Answers

If you are looking for a wiring diagram for the fuse box then there are a couple of sources. Pickup a hayes or chilton repair manual from a local parts store or go online to ALLDATA. com. You will have to pay for the info online, but you can print it off. You can search for the wiring info online for free but I have had little success that way. If you are looking for fuse locations within the fuse box then try the owners manual in the glove box or buy a manual.

Posted on Mar 11, 2009

6 Suggested Answers

c17hydro
  • 2984 Answers

SOURCE: I need a fuse box diagram for a 2001 pontiac grand

a91cfc9.gif
Hope this is the one you are looking for!

Posted on Apr 26, 2010

  • 1 Answer

SOURCE: LOOKING FOR A FUSE BOX DIAGRAM FOR 2004 PONTIAC GRAND PRIX GT

It's under the hood, on the driver's side, under a square, black box with a lightning symbol on it. Loosen the flower-shaped screw that holds the lid of the box down, remove the lid, flip it upside down and when you look at the inside of the lid, you'll see a map of all your car's fuses. There's also a fuse diagram on the very end of the dash, but it's accessible only when you open the driver's side door. When you're driving, that end of the dash is blocked by the closed door.

Posted on Jul 01, 2009

  • 7770 Answers

SOURCE: key locked in 2001 pontiac grand prix battery is

lock smith or someone authorized to use a slimjim[can do more damage if dont know how to use ]--or-- key fob wont work if vehicle battery dead if u can reach up under car at front and release hood latch then jump battery and then use key fob to unlock door

Posted on Feb 20, 2010

Testimonial: "thank u"

PyroPCMan
  • 405 Answers

SOURCE: diagram on a pontiac grand prix

Ignition Switch GM Century/Lumina/Grand Prix/Intrigue 1997-2000 The vehicles covered by this guide use one of two types of ignition switches:

  • A mechanical key and lock cylinder built into the steering column, that works a pull rod to actuate the separate electrical portion of the ignition switch mounted further down the steering column. For more information and replacement procedures on this type of switch, please see .
  • An instrument panel-mounted ignition switch is also used on some W-Body vehicles. To service this switch, the radio, heater & A/C control panel and the instrument cluster must be removed. All of these procedures are found elsewhere in this section.
REMOVAL & INSTALLATION
Instrument Panel-Mounted Ignition Switch
WARNING You must perform the Body Control Module (BCM) theft deterrent relearn procedure after replacement of the ignition lock cylinder. Failure to perform this relearn procedure means the BCM will not function properly. This means the vehicle will not be theft protected by the Passlock system and the engine may not crank or start. GM recommends that this procedure be performed with their Tech 2® or equivalent scan tool. An alternate relearn procedure is given at the end of this procedure.
  1. Disconnect the negative battery cable.
  2. Remove the radio assembly following the procedures found in this section.
  3. Remove the heater & A/C control head assembly following the procedures found in this section.
  4. Remove the instrument cluster assembly following the procedures found in this section.
  5. Detach the electrical connectors from the ignition switch.
  6. Insert the key and turn the ignition switch lock cylinder to the ACC position.
  7. Depress the transaxle park/lock cable retainer to release, then pull to remove the cable from the ignition switch.
NOTE You must perform the Body Control Module theft deterrent relearn procedure after replacement of the ignition lock cylinder.
  1. If it is necessary to remove the ignition lock cylinder from the ignition switch (theft damage, etc.), use the following procedure:
    1. Insert the key and turn the ignition switch lock cylinder to the ON position.
    2. Using a small flat-bladed tool, depress and hold the lock cylinder retaining tab.
    3. Using the key as an aid, pull to remove the ignition switch lock cylinder from the switch.
    4. Remove the key from the lock cylinder.
    5. Carefully pull to release the ignition switch bezel from the ignition switch lock cylinder.
  2. Remove the ignition switch bracket bolts and remove the ignition switch through the instrument panel cluster opening.
  3. Remove the bolts retaining the ignition switch to the bracket and remove the bracket.
0900c15280090fea.jpgRemoving an instrument panel-mounted ignition switch assembly—1998 Oldsmobile Intrigue shown, others similar To install:
  1. Install the ignition switch to its bracket and install the bolts. Install the ignition switch into position through the instrument panel cluster opening and install the bracket retaining bolts.
  2. If removed, install the ignition switch lock cylinder to the ignition switch using the following procedure:
    1. Recode the lock cylinder, if necessary.
    2. Align the ignition switch bezel to the tabs on the ignition switch lock cylinder and carefully press to secure in place.
    3. Insert the key and turn the ignition switch lock cylinder to the ON position.
    4. Align the ignition switch lock cylinder to the ignition switch, then press into place.
  3. Turn the key to the ACC position. Align and press into place the transaxle park/lock cable to the ignition switch. Remove the key from the switch.
  4. Attach the electrical connectors to the ignition switch.
  5. Install the instrument cluster using the procedures found in this section.
  6. Install the heater & A/C control panel using the procedures found in this section.
  7. Install the radio assembly using the procedures found in this section.
  8. Connect the negative battery cable.
  9. If the lock cylinder was removed, perform the BCM Programming/RPO Configuration procedure.
THEFT DETERENT RE-LEARN—WITHOUT TECH 1®SCAN TOOL
This procedure takes approximately 30 minutes. Make sure the battery is fully charged before proceeding.
  1. Turn the ignition switch to the OFF position.
  2. Turn the ignition switch all the way from the OFF to the START position, then leave it in the ON position. The engine will not crank.
  3. The SECURITY light should come on and stay on for at lease ten minutes.
  4. Turn the ignition switch to the OFF position for five seconds.
  5. Repeat Steps 2, 3 and 4 again for a second time.
  6. Repeat Steps 2, 3 and 4 again for a third time.
  7. Turn the ignition switch to the OFF position.
  8. Turn the ignition switch all the way to the START position. The engine should now start.

Posted on Sep 09, 2008

  • 92 Answers

SOURCE: 2004 PONTIAC GRAND PRIX FUSE BOX DIAGRAM

The diagram is on the fuse box cover or lid (depending on which fusebox, cabin or engine compartment. The diagram is also in the owner's manual.

Posted on Feb 08, 2010

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse box located in a 2005 Pontiac grand prix


On this website (link below) you find fuse box diagram and description for Pontiac Grand Prix 2005

Pontiac Grand Prix mk7 Seventh Generation 2005 fuse box diagram Auto Genius

Jan 14, 2013 | 2005 Pontiac Grand Prix

1 Answer

Fuse box location 1995 pontiac grand prix


On this website (link below) you find fuse box diagram and description for Pontiac Grand Prix 1995

Pontiac Grand Prix mk5 Fifth Generation 1995 fuse box diagram Auto Genius

Jul 22, 2012 | 1995 Pontiac Grand Prix

1 Answer

Where all four fuse boxes for a 1993 pontiac grand prix


On this website (link below) you find fuse box diagram and description for Pontiac Grand Prix 1993

Pontiac Grand Prix mk5 Fifth Generation 1993 fuse box diagram Auto Genius

May 24, 2012 | 1993 Pontiac Grand Prix

1 Answer

1999 pontiac grand prix fuse box panel diagram


On this website (link below) you find fuse box diagram and description for Pontiac Grand Prix 1999

Pontiac Grand Prix mk6 Sixth Generation 1999 fuse box diagram Auto Genius

Jan 13, 2012 | 1999 Pontiac Grand Am GT

1 Answer

Diagram of fuse box under the hood on a 2001 Pontiac Grand Am


On this website you find fuse box diagram and description for Pontiac Grand Am (2001)


Pontiac Grand Am 2001 2004 fuse box diagram Auto Genius

Nov 07, 2011 | 2001 Pontiac Grand Am SE

3 Answers

2004 PONTIAC GRAND PRIX FUSE BOX DIAGRAM I NEED TO FIND THE MALL PRG FUSE SO I CAN RESET MY KEYLESS ENTERY REMOTE


The diagram is on the fuse box cover or lid (depending on which fusebox, cabin or engine compartment. The diagram is also in the owner's manual.

Jan 30, 2010 | 2004 Pontiac Grand Prix

1 Answer

Need fuse box diagram for 95 grand prix gtp


where is the fuse box on a 1995 pontiac grand prix

Dec 10, 2009 | 1995 Pontiac Grand Prix

1 Answer

Cant locate washer fluid motor fuse on 96 pontiac grand prix se


On this website (link below) you find fuse box diagram and description for Pontiac Grand Prix 1996

Pontiac Grand Prix mk5 FifthGeneration 1996 fuse box diagram Auto Genius

Sep 07, 2009 | 1996 Pontiac Grand Prix

Not finding what you are looking for?
1997 Pontiac Grand Prix Logo

5,935 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

69114 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...