Question about 1997 Mercury Sable

2 Answers

Cant find key code for my 1997 mercury sable

I just purchased a 97 mercury sable and would really like to use the key code but the tag that the code is supposed to be on is not in the owners manual and i cannot seem to locate the code anywhere else on the vehicle

help?

Posted by on

  • 1 more comment 
  • ih8stupidpee Mar 06, 2009

    you wouldnt happen to know what this "module" looks like would you? haha iv looked under hte dash but id hate to pass it up cuz i'm lookin at the wrong stuff

  • ih8stupidpee Mar 06, 2009

    well craappp i was lookin at the right thing i do believe..oh well maybe i'll look again in the daylight tomorrow if not i'll take it in to the dealer as much as id hatte to do that lol

  • sterner76 Apr 04, 2009

    where do i find the code for the keyless locks

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Mercury Master
  • 783 Answers

Look under the dash above the accel pedal and you should see the module.It will or should have a sticker on it with a 5 digit code. This will be the code you need.You can then put your own 5 digit code in if you want. Just put the 5 digit code in then hit the number 2 and put your own 5 digit code in.This new code will remain unless you disconnect battery or battery goes dead then it will revert back to the original code.

Posted on Mar 06, 2009

  • 1 more comment 
  • Chuck Martin
    Chuck Martin Mar 06, 2009

    The only other way to get it is to hook up a scan tool and retrieve it that way.Ford does not keep keyless entry codes on file so dealer can not get it by VIN number.

  • Chuck Martin
    Chuck Martin Mar 06, 2009

    http://i253.photobucket.com/albums/hh43/...



    Here is a pic I have circled the module and connectors

  • Chuck Martin
    Chuck Martin Mar 06, 2009

    well it looks as though my circle didn't show up.Look in the top left corner and find the connector c253 then follw the arrow down to the module.

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 149 Answers

Only a mercury dealer will be able to help you, they will need the vin number of the vehicle to find it for you.

Posted on Mar 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My key won't turn to start my car... It's a 92 Sable Mercury.


Try a lubricant.

Mercury Sable key ? Mile High Locksmith ™

www.denver-locksmith.net/2013/12/mercury-sable-key-replacement/
Dec 23, 2013 - Mercury Sable keys have changed over the years. ... 1991, 1992, 1993, 1994, or 1995, then your car requires two keys. ... If your Mercury Sable was made in the year 1997, then some of the cars will have a transponder key, and some won't. ...Insert the new key into your ignition switch and turn it to the on .

Sep 08, 2015 | Mercury Sable Cars & Trucks

1 Answer

My 97 mercury sable 3.0 is very hard to start once started runs really rough for a second then smooths out


My first guess would be a dirty throttle body or a faulty idle air control valve.
Also one of the injectors could be leaking fuel into the cylinder when you stop the engine.
Is the check engine light on when the engine is running ?

Jul 09, 2012 | 1997 Mercury Sable

1 Answer

I just replaced the cable to my IMRC box on my 97 Mercury Sable and it engages as soon as I turn on the car or when I rev the motor above 2500 rpm. What could have done wrong or didn't do when I put it...


intake manifold runner control has linkage about 3 inches long and is attached to the end of the manifold. never knew of one with a cable. but the box is suppose to move the linkage with the key on to run a check on the engine and it is suppose to open the intake runners at and above 2500 rpm's to induct more air onto the intake at heavy acceleration.

Jun 06, 2012 | 1997 Mercury Sable

1 Answer

What size do I calibrate the spark plugs to a 97 mercury sable.


I have a 97 sable,my plug gap was .044.and runs good..

Mar 18, 2012 | 1997 Mercury Sable

1 Answer

What is the component atached to the underside of the spare tire well on my 1996 Mercury Sable? It has 3 tubes runing to or from it. 1 is rubber and 2 are metal. The brackets that held it up rusted thur...


MERCURY SABLE , manufactured by FORD MOTOR COMPANY had a problem with SUSPENSION:FRONT . AT HIGHWAY SPEEDS, VEHICLE SWAYS AND VEERS EXCESSIVELY IN MODERATE CROSSWINDS. *AK.Vehicle Identification Number (VIN):1MEHM55S31A. MERCURY SABLE 2001 problem was reported in ANDOVER, MA. Original Owner. Vehicle was purchased on 20000901. Vehicle was using ANTI-LOCK BRAKES.Vehicle was using Cruise Control.MERCURY SABLE 2001 drive type:FWD. FUEL SYSTEM:N/A. FUEL TYPE: GAS. VEHICLE SPEED: 65 mph.

May 25, 2011 | 1996 Mercury Sable

1 Answer

1998 sable, needs a new ignition key. we purchased a used sable. it only has copied keys. we would like to have "original" keys. the dealer says that we can only get a code for 2000 and newer....


There are places in the yellow pages that have locksmiths that can do what you need. They can re-key the whole vehicle if you are willing to spend about 300 dollars provided you have a coded ignition key. They can come to your car and do it.

Jan 08, 2011 | 1998 Mercury Sable

1 Answer

Replace front mounts on su b frame of 97 Sable


there really easy support the frame with a jack and pull the two 18mm bolts the dealer sells the replacement mounts.

Aug 08, 2010 | 1997 Mercury Sable

2 Answers

Tranny fluid leaking from my 97 mercury sable. "I located it coming from a silver box located directly underneath battery. What is the name of this part?


don't know what the silver box is, but its probably the transmission cooler line going from tranny to radiator. should be 2 silver lines coming from radiator. follow them

Feb 18, 2010 | 1997 Mercury Sable

1 Answer

No spark from coil


I had the same problem with my 97 sable it turned out to be the ecm module.

Sep 06, 2009 | 1995 Mercury Sable

Not finding what you are looking for?
1997 Mercury Sable Logo

Related Topics:

519 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

fordexpert

Level 3 Expert

5627 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...