Question about 1997 Ford F150 Regular Cab

1 Answer

We changed the brakes, routers and bearings on my 1997 Ford F150. The next time we drove it the brakes didn?t work well at all. At these points a good friend noticed we need to change the calipers, which were very bad. We are still having problems coming to a stop at a slow speed. The ABS light comes on sometimes. Any help so we don?t have to pay $75.00 to hook it up to an ABS system.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

On the Fords, the most likely problem is the rear ABS sensor in the rear end. With out paying the $75 to be sure though it is just an educated guess.

Posted on Mar 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced wheel bearing and speed sensor on RF, 2000 f350 diesel dually. Drove 1 month about 1000 miles, now I get c1145 and c1230 with abs light. Any ideas?


ABS code C1145 - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > 1997 - 2003 F150
Aug 20, 2009 - ABS code C1145 1997 - 2003 F150. ... C1220 Yellow ABS WarningIndicator Failure (2) C1222 Wheel Speed ... C1230 Rear ABS Sensor (Electrical/Static) (2) ... ABS light on (Anti Lock Brakes) and I hear pump when in turn ...
Oct 9, 2010
ABS code C1206-2003 F150 SuperCrew
Aug 13, 2007
ABS light C1230
Oct 22, 2006
ABS light on DTC's C1229,C1230
Nov 18, 2002
More results from www.ford-trucks.com

Nov 17, 2015 | Cars & Trucks

1 Answer

1997 ford f150 2wd, anti lock rear. I replaced brake pads on both frt. Now one side is dragging. Wheel bearings seem to be ok - no slack. Would my rotor be warped, causing the heat up? Also - all I seem to...


the brake drag could be caused by a brake caliper sticking and not releasing, which means replace both calipers and bleed system, as usually when one goes bad the other is not far behind. another thing is if a brake flex hose has collapsed internally it won`t allow the caliper to be released completely. the name for the bearing is called inner wheel bearing. as far as the rotors if they haven`t been changed or turned and have heated up enough that you could smell brake material then change them in pairs.

Aug 05, 2014 | Cars & Trucks

1 Answer

No brake lights or turn signals on a 1997 ford f150 4.6l v8 ext cab automatic whats wrong?


Did you check the fuses for both of them ?

Do the parking lamps work ?
- If not check the ground on the bulb connector.

When was the last time you changed the bulbs ? ( Could be the element is blown out ).

Oct 03, 2010 | 1997 Ford F150 Regular Cab

2 Answers

2000 F150 Passenger back brake locks up always


Check condition of brake drum and brake linings.
Check brake drum not out of round,
Check for fluid or oil leaks in the rear brake area.
Check rear brake proportioning valve is working correctly.

Jul 07, 2009 | 1997 Ford F150 Regular Cab

1 Answer

Do I need to remove axel?


rearend bearings are pressed in mechanicly so they are very tighly pressed in it all depends where the bearing is located if it is a wheel bearing the answer is no but you might need special tools

May 31, 2009 | 1997 Ford F150 Regular Cab

2 Answers

I can't loosen a caliper bleeder valve.


try putting a six point socket with ratchet on the bleeder screw and try turning while tapping the top of the ratchet with a hammer.

Feb 20, 2009 | 1997 Ford F150 Regular Cab

2 Answers

1997 f150 4.6ltr engine has just been rebuilt. I drove it for a week everything was fine. engine began hesitating at idle and stumbles upon acceleration. oil pressure gauge fluctuating at idle. missfire...


Check for a vaccum leak at the intake. Spray a bit of starting fluid in this area with the engine at idle. This engine will speed up a bit when you hit the spot! Replace the gasket or put the hose back on. Way you go! Frankster016

Oct 25, 2008 | Ford F-150 Cars & Trucks

Not finding what you are looking for?
1997 Ford F150 Regular Cab Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63577 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...