Question about 1996 Jeep Cherokee Country

1 Answer

No Spark my 96 jeep country has no spark to the coils. I have replaced the crank position sensor, sparkplugs and wires. Distributor cap, rotor button and coil. It still has no fire to the coils.

Posted by on

  • Anonymous Mar 23, 2014

    Jeep cranks hard but won't fire. Replaced MAP sensor, distributor cap and coil. There is voltage at the coil primary wire. I can hear the fuel pump pressure up and I have pressure at the fuel injector rail.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

The " FIRE" doesnt come to the coil from any of those things you have changed.......The "fire" comes from the coil TO those items!!!! Good luck, RC

Posted on Mar 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Having trouble starting my 1995 Jeep Grand Cherokee. Changed out distributor cap, rotor, module and spark ignitor coil and no luck. Checked for spark by taking loose a spark plug wire and using a sc


is the check engine light on. it sounds like a bad sensor crankshaft positioning sensor or camshaft positioning sensor will cause it not to start.

Aug 16, 2014 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Trying to figure out what the name of a part is


That would be the ignition coil, the part that creates spark at the spark plug. If you follow the electrical path from the coil wire to the distributor cap, and from there, the spinning rotor just under the distributor cap carries the path from the coil wire at the cap's center to the spark plug wires around the dist. cap, and through the plug wire to the spark plug.
The high voltage causing the spark is created in the ignition coil by the engine computer at the precise right moment signaling an ignition module to cut 12 volts current to the ignition coil. This causes the coil to internally build up high voltage which is passed through the coil to distributor cap wire. The computer knows the precise right moment to initiate spark from engine sensors, primarily the crank position sensor and the cam position sensor.

Nov 06, 2012 | 1999 Dodge Durango

1 Answer

ITS CRANKING BUT NO SPARK- 96 ACCORD F22B2


Honda Accord,why go through the step of trouble shooting it, in the distributor is the ignitor just replace it.If you want to trouble shoot it use the vehicle tach, when you crank the vehicle do you see the RPM needle moving (just a realy vibrating bit) that a sign that the Ignitor is workning and if you got no spark your problem reside in the cap or the coil or even the sparkplug wire from cap to rotor

Mar 08, 2012 | Cars & Trucks

1 Answer

My engine turns but no spark I changed ignition coil and still no spark,what could it be?


Depending on which engine your car is equipped with; the following components could be at fault.

Crankshaft Position Sensor
Camshaft Position Sensor
ECM (Engine Control Module)
Distributor Cap or Rotor
Fouled Spark Plugs
Bad Plug Wires

If they haven't been replaced in the last 30K miles, I suggest you check and /or replace the the plugs and wires first.

If your engine is equipped with a distributor, check and/or replace the distributor cap and rotor if it hasn't been replaced in the last 30k miles.

If your engine is equipped with crank or cam sensors have them tested.

Mar 21, 2011 | 1990 Volkswagen Cabriolet

1 Answer

I have a 96 dodge avenger es, but there is no spark going to the engine's sparkplugs?


Hi, Hope I can help you.
I do not know how you have checked for spark, but lets start from the beginning.
Lets start with an ignition systems check.
1. I want you to remove the high voltage coil wire. ( That's the wire in the center of the distributor cap.) Using a good pair of insulated pliers. I want you to hold it about 1/4 inch from a good engine ground. Now you will need a bit of help from a partner. Get them to turn the key and crank the engine. You should see a bright blue and well defined spark. Ok, If you have spark I want you to slowly move the coil wire away from the engine ground. As you do this I want you to pay attention to the coil tower. (The coil tower is where the other end of the coil wire is attached.) What your looking for is arcing and sparking at the coil tower. If this happens then you need to replace the coil with a new one. If this does not happen then your coil is working fine, and we will have to move on.
Note if you do not get spark from the coil wire replace the coil.

2. Ok if you have spark now we have find out if the spark is making it to the spark plugs. How are we going to do this? By checking the rotor, distributor cap, spark plug wires and spark plugs.First lets remove the distributor cap. This will allow use to inspected the rotor and the distributor cap. What your looking for is, cracks, carbon tracks and wear at the tip of the rotor. On the distributor ,look inside the cap for cracks, carbon tracks and wear on the terminals. If you find any of this replace the distributor cap and rotor. ( Note if you have any doubt of the condition of the rotor or the cap replace them.) Next lets check your spark plug wires. Lets pull off one of the spark plug wires from the spark plug side. Now inspect the wire connection for a white crusty powder. If you find crust replace your wires. Now you should check all of them the same way, but if even one has corrosion replace them all. You are going to have to inspect the wire its self . Going down the whole length of the wire. Holes cracks burn Marks and other damage. Once again if you find any damage replace them all.
I hope this will help you and good luck to all the read this FixYa

Dec 04, 2010 | 1996 Dodge Avenger

2 Answers

96 jeep grand cherokee no start. Has no spark, replaced coil, still has no spark. fuses and relays in power distribution all good, also fuses in cab all good. no codes in ecm. plug at coil has...


the crankshaft position sensor located between flywheel and trans is where the power source for the coil comes from. I suggest you need change that

Sep 09, 2010 | 1997 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Cherokee Country Logo

Related Topics:

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...