Question about 2009 Ford F-150

1 Answer

What color are the wires for the iat sensor on a 2009 f-150 w/ 5.4 l

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 37 Answers

The iat is part of the maf sensor located in the air filter duct or housing. 6 pin connector. pin one color violet/gray is for iat. pin 2 is c-signal rtn yellow/violet. pin 3 maf yellow/violet. pin 4 maf rtn blue. pin 5 ground black/yellow pin 6 circuit breaker fuse 76 blue/brown

Posted on Mar 07, 2009

  • trave crain Mar 30, 2013

    thanks that will get the job done

×

5 Suggested Answers

fastboyz
  • 674 Answers

SOURCE: 2008 E-350 IAT sensor wires

is this what you recieved?9af2263.jpg

Posted on Nov 12, 2008

  • 18 Answers

SOURCE: wire colors for my IAT sensor

red with blue stripe and black... cut the red with blue strip and connect one end of the resistor to the harness side. Then splice the other end of the resistor to the black wire... do not cut it just splice into it.

Posted on Dec 21, 2009

reisdos
  • 1297 Answers

SOURCE: ON A 2009 F150 4.6 3V --NEED TO KNOW WHAT COLOR

should be the yellow/violet and violet/gray


Posted on Mar 24, 2010

bonedivers
  • 1140 Answers

SOURCE: I have a 2009 eclipse gt and I need to know the

bit vague on vehicle but try this:
98_mt09eclip_esm_90-074.png&width=544&height=661&displaytype=display&imgrotation=&links=

Posted on Jun 04, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What 2 wires for iat sensor


you lost the colors.? or are there 2 wires there that you know are IAT but dont know which pin fit them.?
no matter, either pin works.
the sensor is not electronic, its just a resistor, that is non polarized
the ECU sends current to the IAT, the current that flows, tells the
ECU what the air temperature is. in the intake.
no car year stated
no engine option stated in F150
so NO ANSWER exact , ever. (country helps too, but ill not say that it scares folks to death for some reasons)
Im in USA and ford does EXPORT cars and trucks.
the IAT is a thermistor, the FSm shows how it works and how
to test one easy, super easy, ask.

tell more get more.

Jun 14, 2014 | Ford F-150 Cars & Trucks

1 Answer

For a 2005 GMC yukon 5.3L what are the wire colors that control the IAT sensor There should only be 2 wires controlling it but there are 5 on the connection as it controls the MAF and IAT with the sa


The intake air temp sensor is part of the MAF sensor so yes there are 5 wires.
The two wires that go to the air temp sensor are tan and black. The other three are for the MAF.

Apr 20, 2013 | GMC Yukon Cars & Trucks

1 Answer

2005 chevy cobalt IAT sensor wire colors


Hi Mike:
The IAT sensor is an integral part of the Mass Airflow Sensor, located on the air filter box. The MAF sensor has 5 wires. The yellow wire with the green stripe is the output from the IAT and feeds terminal THA on the ECU.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Feb 15, 2012 | Cars & Trucks

1 Answer

I have a 03 mitsubishi eclipse 2.4 what colors belong to the IAT sensor


Color wires? The IAT sensor is part of the mass air flow sensor. The wires in the MAF harness that go to the IAT sensor are: Brown is ground, Red/Purple is the 5v reference, and Green/Yellow comes from the IAT into the Atmospheric Pressure Sensor and out to the computer.

Hope this helps. Good luck!

Apr 12, 2011 | 2003 Mitsubishi Eclipse Coupe

1 Answer

What color wires lead to the IAT sensor on a 2005 ford f250 6.0 powerstroke?


Hello! The Intake Air Temperature (IAT) sensor has the following wire colors...Gray/Red and Gray...


Guru...Saailer

Jan 04, 2011 | 2005 Ford F 250 Super Duty

1 Answer

Wire colors for my IAT sensor


red with blue stripe and black... cut the red with blue strip and connect one end of the resistor to the harness side. Then splice the other end of the resistor to the black wire... do not cut it just splice into it.

Mar 27, 2009 | 2003 Mitsubishi Eclipse Coupe

2 Answers

Mazda 6s IAT or MAF Wiring Schematics


What are the colors of the two IAT wires in the MAF sensor?

Aug 02, 2008 | 2004 Mazda 6

Not finding what you are looking for?
2009 Ford F-150 Logo

812 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...