Question about Suzuki Samurai

8 Answers

Suzuki samurai 1991 replaced starter moter 3 times and battery and battery cables and cellonoid and it clicks but won't start

Posted by on

  • jimstap50 Mar 06, 2009

    starter moter does not turnover it justs clicks adequate power to starter moter

×

8 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

THERE ARE SEVERAL SUPPLIERS FOR THE FIX, HERE IS ONE. Xtreme Clicky Starter Fix Suzuki Samurai ZukiCreations

Posted on Apr 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 19,396 Answers

You need to replace the ignition switch that is located inside the steering column and the ignition coil, if that is not enough also replace ignition cylinder.

Posted on Mar 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 158 Answers

Hello, It sounds like you may have a positive or ground cable that is not allowing enough fire. They may be coroded on the inside. to make sure its not the ground take a pair of jumper cable one end to battery ground the other end to the motor. Then see if it will start. Also take a socket and get on the crankshaft pulley and make sure you can turn it, that the engine is not locked up.Please rate my answer thank you.

Posted on Mar 06, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 315 Answers

Engine seized. needs new engine.

Posted on Mar 06, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,920 Answers

Ry jumping it across at the starter with a screwdriver and see if that doesnt kick it over and start it. make sure the key is in the on position

Posted on Mar 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,037 Answers

Sounds like you need more power. Act as if you were jump starting it with another car. Has the car gone through a engine replacement or anything lately? If you try jumpstarting it, it should work. When it clicks, do the interior lights flash? If so, then jump start it for sure

Benjamin

Posted on Mar 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

Its the ignition switch. i would replace the ignition switch. make sure the connectors that couple the ignition wires are nice and tight.

Posted on Mar 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 583 Answers

Check out the fuel pump and fuel filter are they proper.check spark plug are they getting soarks and are they clean also check the starter relay and ignition switch.

Posted on Mar 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have an 88 Suzuki samurai, I try to start it n the old start just clicked, so I bought a new starter and put on it and it does the same thing, like it can't turn the flywheel. But if I pull the starter...


Put a wrench on the front of the engine and see if it will turn, almost sounds like you threw a rod or the timing belt broke. Either one is not good news

Mar 29, 2015 | 1988 Suzuki Samurai

2 Answers

It won't start: new battery, have lights, it just clicks when you turn the ignition switch


you mean it wont crank, it must crank to start.
1: bad starter system
2: weak battery even a new battery can be weak.
if you dont charge it first.
or if it starts ok then wont later, that means cars charge system failure.

can you jump start engine? with jumper cables.
that be a big clue there, proving starter works but battery was weak.
if the battery is fully charged.
you can hot wire the starter solenoid, (tiny terminal)
if car cranks now, the key start wire is failing.
A/T or M/T tranny? both use different path here....??????

if you cant hot wire it, then that means the stater is bad
the cables bad or the battery is not really connected.
or possible the engine is seized, can you hand turn over the engine at the front crank bolt (CW , facing rear, in neutral)
if not motor is seized.
some times even the starter and rig gear can be seized.
the starter can be bench tested. too.
http://www.fixkick.com/nocrank.html

Sep 19, 2013 | 1988 Suzuki Samurai

1 Answer

1988 Samurai clicks when i try to start


this is an starter soleniod symptom

Jun 09, 2009 | 1988 Suzuki Samurai

2 Answers

Won't start not even click


I am pretty sure you have a bad solenoid on your starter. Sometimes if you tap on them while someone holds the key in start they will make contact and it will start. Best solution is replace solenoid. You can check it by having someone hold the key in start and measure the voltage from the small wire to ground, if it is bad you will have voltage but it will not even click. Hope that helps you.

Dec 18, 2008 | 1987 Suzuki Samurai

1 Answer

1991 suzuki samurai want start


Check ECM (engine computer) located under glove box. Injector circuit output probably dead. Replace ECM. Go to Searchparts.com for best price.

Jun 06, 2008 | 1991 Suzuki Samurai

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...