Went to start my 1994 honda civic Ex 1.6 vtec and started for a 3 sec interval and died and will turn over but will start or fire. Prior to this it has had some issues when engaging it it in drive or reverse would idle between 600rpm to 1000 and miss or hesitate. Any idea what this could possibly be?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.cargurus.com > Questions > Honda > Civic Coupe
CarGurusJul 9, 2008 - Get someone to turn it over and see if it is getting spark. ... i have the same issue with my 1993 civic lx it has a 1.5 sohc non-vtec i changed ... comes wen the 2nd click of the main relay it doesn't occurs until after few minutes, few .... My 2000 Honda Civic Ex Vtec will not start, has a new tps, new throttle body, ...
Dec 31, 2012 - Difference Between a No Start and a No Crank Condition. ... can cause your 1.6L Honda Civic (Civic del Sol) to Crank but Not Start. ... In other words, the engine doesn't turn over at all. ... 1995, 1996, 1997, 1998, 1999, 2000.
Oct 21, 2013 - Uploaded by SkzDaniel
Honda Civic won't start or crank with the clutch but goes on when you push start it. ... 2000 Honda Civic LX with new battery and starter. Still will ...
Aug 21, 2013 - Uploaded by Robert SnyperMD
2000 Honda Civic LX with new battery and starter. Still will not start. ... Crank, No Start Diagnosis Honda Coil test. - Duration: 11:17. by ...
.....(front) Rotation: Clockwise Let me know if this helped, or if you have addtional questions. Feel Free to contact me at FixYa.com!
reset the ecu pull #6 fuse 15a for 10 msec. check oil level fill if needed. start engine hold at 3 grand for at least 2 sec road test if still comes back 1259 repeat 2 times. If it is gone it is intermit problem check for loose terminals at VTEC solenoid vavle oil pressure switch and the ECM/PCM. If you still have the code turn ignition off remove resonator disconnect the VTEC oil pressure switch 2p connector check for contnuity between VTEC oilpress switch terminals 1 and 2 if none replace the oil pressure switch. if yes measure voltage between ECM/PCM connector B9 and body ground. Voltage? repair open wire between B9 and the oil pressure switch. If no than the ECM/PCM will need to be checked for the latest software and reprogrammed to be further diaged. This will only be able to bedone at the dealer.