Question about 1995 Nissan Maxima

1 Answer

I have a 95 nissan maxima and I am trying to locate the computer. I found a connection that looks to be for obd2 near the passanger side of the car in the center console. did they make obd2 on 95 maxima's? if not where is my computer located so I can run my codes? thanks in advance.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Nissan Master
  • 383 Answers

Jnuttz99: The ECM is located to where you access it on the passenger's side of the car. You remove the center console cover under cover, remove the harness protector and them you can remove the ECM.
The car is OBD2 and the ALDL port is in the fuse panel opening at the top of the opening. The fuse panel is to the left of your steering wheel and is a rectangular cover in the lower panel you see in front of you left knee. Just pull on it and it will come off. You will see a grey plastic connector about 1 1/2 inches wide by 1/2 high. You can get the car scanned by Auto Zone for free, so you don't have to go through the trials of figuring out how to decipher the codes. Once they have told you the codes stored, get back to me and I'll see what I can do for you. There should be no reason to access or remove the ECM.

Posted on Apr 20, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where's the obd2 located in a 2007 Nissan maxima

OBD2 (OBD2 means "On Board Diagnostics Generation 2") is a system not a thing like an alternator or engine.

Jun 25, 2017 | Nissan Cars & Trucks

1 Answer

Is there an OBD1 readear for a 95 Nissan Maxima?

In rare cases your 1995 Maxima might use OBD2 but it is probably a OBD1. You could try an OBD1 reader but unfortunately OBD1 was not anywhere as useful for diagnostics as the OBD2.
SOLVED What scan tool do need 95 Nissan Maxima

Feb 22, 2015 | 1995 Nissan Maxima

1 Answer

Were is the egr valve located on 95 maxium

It is a 1'1/8 " tall x1/2" w x1/2" D apparatus , brass body enclosing brown or green plastic with electronic receptacle in the bottom with 2 hose stacking on top ,one hose in bottom, mounted with one single bolt ,driver side , in front of the air intake next to the battery . It should say NISSAN K5T46583 then Mitsubishi sign then 6524

Looks something like this picture on this site.

Feb 11, 2011 | 1995 Nissan Maxima

1 Answer

I need to replace the passanger side drive axle on my manual 95 maxima, and I was looking for a video, or a step by step of how to complete this rask.

Your best bet, is to take it to a shop and have it done on a lift,by someone with experience. You can do it yourself,but if you need a video,you most likely don't have the tools either,and could end up getting hurt.

Sep 14, 2010 | 1995 Nissan Maxima

1 Answer

Misfire in # 2 cyclinder trying to locate

Driver side first cylinder.

Driver Passanger
2 1
4 3
6 5

Jul 02, 2010 | 2004 Nissan Maxima

1 Answer

My son's 2000 Nissan Maxima (110,000 miles) won't crank

if you jump a car then take it to get tested it will pass no matter what it off and get it tested maybe???

Mar 31, 2010 | 2000 Nissan Maxima

1 Answer

I have a 94 nissan maxima and when it rains the car just cranks but doesnt start and as soon as it gets warm out it starts. why?

the windshied may have a leak and could be getting on the ECM which is located under the dash in front of the console. there is a little cover on the passanger side and the drivers side by the gas pedal

Mar 31, 2010 | 1994 Nissan Maxima

2 Answers

I am looking for OBD2 connector in my Nissan Maxima 1998 2l.

It has been a while but it should be on the driver's side under the dashboard. Near the kick panel. Hope that helps, most of your chain auto parts stores will diagnose you for free if the vehicle is drivable to take it to them.

Jul 23, 2009 | 1998 Nissan Maxima

2 Answers

I bought the new blower motor resistor for my 95 nissan maxima. what are the steps to install the new resistor ? Im not a mechanic but have no choice but to try and do this myself. thanks

The blower resistor should look like a credit card if it is manual air and it is located near the blower motor. Remove connector and then two screws and it should slide out. Replace with the new one. If you have auto air then the blower motor is regulated by a fan control amp which is located behind the glove box.

Jul 22, 2009 | Nissan Maxima Cars & Trucks

Not finding what you are looking for?
1995 Nissan Maxima Logo

931 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

77499 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides