Question about 1997 Plymouth Grand Voyager

1 Answer

Grand voyager problems

I have a 1998 plymouth grand voyager i changed the egr ,cam position sensor,crank position,and the dorn thing still isn't running right stalling when coming to a complete stop putting down the road wont stay running

Posted by on

  • Anonymous Mar 27, 2009

    My 97 Voyager (3.3 liter) will stall out at random while driving. It will also not start. So far the cam-shaft sensor has been replaced and the codes show the new one is either working or not, the same reading is given for he crankshaft sensor.

  • Mike Butler
    Mike Butler May 11, 2010

    Runs good down the highway, only problems at idle/stopping? Any scan for trouble codes done on this vehicle yet?



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

I ran into this problem this past winter and after going threw everything I finally solved this problem by taking off the fast idle servo and cleaning behind it with solvant If it gunks up in their it cannot function properly causing it to stall when idiling or coming to a stop. Try this simple solution it will more than likely work for you and keep it from stalling.

Posted on Apr 16, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a Plymouth Grand Voyager that I just replaced the egr valve on, and it wont crank over. any ideas?

Sounds strange that "no crank" after just changing EGR valve...go back to basics...check the battery post connections, all of your lights can still work with a dirty connection...the starter requires a lot more juice to crank...Hope this helps.

Apr 29, 2015 | 1999 Plymouth Grand Voyager

1 Answer


If your voyager is equipped with one---- change the ballast resistor, it's an oblong white ceramic block usually on the firewall, or on the inner fender well, it has 2 wire connections, one on each side.

Aug 28, 2009 | 1998 Plymouth Voyager

1 Answer


Have you checked the timing belt? If it failed then you wont get the pulse from the cam sensor and no spark. Good luck

Apr 27, 2009 | 1998 Plymouth Voyager

Not finding what you are looking for?
1997 Plymouth Grand Voyager Logo

590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

78237 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides