Question about 2003 Chrysler PT Cruiser

4 Answers

Car quit going down the road. Heard a thump and car died

Driving 2001 PT Cruiser and it just quit running. at first all the lights and gages would just go nuts. replaced the ignition switch electrical part and this stopped still will not start though. replaced coil packs and still nothing. what do i do next. HELP PLEASE. this is our only car we are borrowing one and have got to give it back soon.can also contact at xmax522@yahoo.com and thank you ahead of time ...Todd & Joan

Posted by on

  • Anonymous Mar 11, 2014

    maytag 300 vw1 series dryer f01

  • Anonymous Mar 11, 2014

    I have an HP Pavilion a1640n it powers up beeps 1 long 1 short beep and thats it. also installed new hard drive

×

4 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 19,396 Answers

Check the starter motor solenoid, if that is bad, better replacing the whole starter motor.

Posted on Mar 09, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

Need to check the immobilser as this may have kickrd in or need resetting.some immobilisers allow the car to crank but will stop sparking or fuel.hope this is usefull.

Posted on Mar 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 154 Answers

Check out the dianmo of the car might be have some problem.

Posted on Mar 05, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Sounds like the timing belt has broken... have you checked that ?

Posted on Mar 05, 2009

  • Roberta Smith
    Roberta Smith Mar 05, 2009

    turn it over and look in where you add the oil to see if the camshaft is turning

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 pt cruiser


Faulty sensor. See if it starts in neutral, if you have success the park position on your shifter may have worn out. If not the sending switch is likely worn out.

Jun 08, 2016 | 2001 Chrysler PT Cruiser

1 Answer

My 2001 pt cruiser will stop running and then a litle while loner it will start and go again but not for to long. Changed the serptine belt and that didnt help


A problem like that sounds like the ignition coil overheats/quits after time. So after it dies, check for spark on the plug wires as someone is cranking the engine. (pull wire off and hold end next to ground and see and hear a spark)

Feb 18, 2015 | 2001 Chrysler PT Cruiser

2 Answers

2006 pt cruiser shut off while driving and won't restart?


Possibly the ignition switch. I had weird issues happiness with mine like that. I took it to the dealer and they quickly determined that the electrical part of the ignition switch had failed. They told me that thus is not uncommon in pt cruisers. They replaced it and all was well in the world.

Oct 15, 2014 | 2006 Chrysler PT Cruiser

1 Answer

Battery light still on after replacing alternator in 2001 pt cruiser


Well the battery light means the battery is not being charged, but it could be a fuseable link or computer problem. Could even be a problem with the ignition switch.
You need to know if the alt is getting a signal and has batt voltage.

Jun 25, 2012 | 2001 Chrysler PT Cruiser

1 Answer

2001 PT Cruiser: my 2001 pt cruisers check engine light will not co...


GET THE CAR SCANNED FOR ERORS ON ANY ELECTRIC PARTS THAT MIGHT B FAULTY OR BROKEN

May 17, 2010 | 2001 Chrysler PT Cruiser

1 Answer

2002 pt cruiser belt replacement diagram


Asked under 2001 Category for a 2002 Question.

Click on the following free direct Link. It has the correct Serpentine/Drive Belt Diagrams for your 2002 Chrysler PT Cruiser 2.4L DOHC In-Line 4-Cylinder Engine with the Engine Options (AC/No AC etc.). It also has Instructional and Directional Diagrams inorder to remove and/or replace the Belt(s).
Note: the differences between the Automatic Tensioner and those Tensioners with Adjusting/Locking Bolts/Nuts

http://www.2carpros.com/car_repair_information/year/2002/make/chrysler/model/pt_cruiser/2002_chrysler_pt_cruiser_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

Mar 28, 2010 | 2001 Chrysler PT Cruiser

1 Answer

2001 PT Cruiser radio quit working. had replaced


pull and check all connections if all is good then radio is bad again.

Nov 01, 2009 | 2001 Chrysler PT Cruiser

1 Answer

Need installation instructions for replacing drivers side mirror 2001 PT Cruiser - hit and run left both car mirrors in the street. Thanks, Patricia


There's three nuts on the inside of the door near he top (backside of the mirror). You may have to pull the door panel to access the nuts and wiring connector.

Aug 19, 2009 | 2001 Chrysler PT Cruiser

2 Answers

2001 PT Cruiser quit running driving down highway


Most likely a cam sensor or a crank sensor. The timing belt didn't break did it? They also have an issue with the timing belt tensioner going bad and jumping a tooth.

Mar 05, 2009 | 2001 Chrysler PT Cruiser

1 Answer

Oil light keeps coming on and beeps


This is the pressure light, nothing to do with the oil needing to be being changed, you have low oil pressure being indicated, this will destroy the engine if the light is really indicating low oil pressure, have the oil pressure tested with a mechanical test guage at a shop, if the oil pressure is ok then replace the oil pressure light sending unit.

Nov 23, 2008 | 2001 Chrysler PT Cruiser

Not finding what you are looking for?
2003 Chrysler PT Cruiser Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...