Question about 1991 Honda Accord

1 Answer

My brake lights dont work. does anyone know how much it is going to cost to fix it? and how long

Posted by on

  • blueextc3221
    blueextc3221 May 11, 2010

    double check the brakelight limit switch on the brake pedal. Have you verified there is power to that switch?

    It may be out of place, or faulty.



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 93 Answers

If the fuses bulbs are ok then might just be a switch located on top of the pedal.u mite be lucky as some of the hondas had some adjustment in them failing that and u need a new one a switch may be at the most £20 +about 1/2 hour to fit.hope this is useful please rate .thanks.

Posted on Mar 05, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

3 Answers

What is wrong with your vehicle if the abs light is on.

ABS light is the Anti-lock Brakes. the most common cause for the light is wheel speed sensor. These are fairly inexpensive and easy to change, but the only way to know what the error is, is to have the computer scanned by a tool that is able to talk to the ABS module. This will tell you what the issue is, and if it is just a speed will tell you which one.

Aug 17, 2015 | 2003 Jeep Grand Cherokee

1 Answer

2007 Dodge Caliber SXT, engine light came on few days ago. My RPM's seem to be revving high even when idiling and car sounds like it's whining. A lot of knocking from under car also. I have 106,000...

I have read your problem . You can easily get the solution from the given link.
They provide us manuals for every car repair ,Kindly go to that link and try it once.

Jul 02, 2017 | Cars & Trucks

3 Answers

Rear Brake Lights not working (Hyundai Atos Prime GLS 2007)

could be a bad ground on the light socket or try to buy 1 bulb to see if it works because there is actullay 2 lights in each bulb one for brakes and one for tail light

May 02, 2012 | 2007 Hyundai Atos Prime

3 Answers

My 97 Chevy Blazer has spongy brakes. Master cylinder was replaced and brake booster was replaced. Braked lines were bled and brakes are still spongy. Can anyone help?

you must have air trapped in the system still, dont drive this car until this problem is fixed, please, for safety reasons. if you dont know how to bleed the brakes have a professional do the work. the fluid might have been contaminated and should be totally reserviced, DOT 3 fluid or better.
can you rate this!

May 09, 2010 | 2006 Fiat 124

2 Answers

No brake lights

Sounds like it is your brake light switch which is located on the brake pedal itself.  Should cost around $20 at autozone and is pretty easy to change out yourself.  Thanks for rating my response and for using FixYa!

Mar 27, 2009 | 1998 Mazda Protege

2 Answers

Brake light dont work

check the fuse for the brake lights. The brake lights and siganl lights use the same bulb filament. The parking and running lights use a dimmer filament in the bulb. There are 2 filaments.
Your brake lights work through the multifunction switch which operates the signal lights. If the signal lights work, you may have a bad brake lamp switch which is on your brake pedal arm.
Let us know what you find.

Mar 20, 2009 | 1998 Lincoln Town Car

1 Answer

S-10 brake & tail lights going not working & then start to work

I had a similar issue with my rear tale light. Could be a loose wire.
I found if I hit a bump it would come back on.

Nov 29, 2008 | 2001 Chevrolet S-10

4 Answers

Abs and brake lights on on dash

I have the same issue, mostly when I turn the van on, the emr. brake light is on, then later the abs light comes on, my brakes work fine squeking or anything...wierd, i was gonna take it to Ford and let them look at it, but a nothing issue will cost 500 bucks real quick, neway its mostly just annoying.

Sep 12, 2008 | 2001 Ford Windstar

Not finding what you are looking for?
1991 Honda Accord Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides