Question about 1999 Chrysler 300M

1 Answer

Linnking erro please i am working on achrysler 300m which does not start bocause the injectors does not spray fuel when iconect a scanner the informatio i recieve is linking erro i have tried about three scanner and i recieve the same information please what do i?

Posted by on

  • Daniel Hanson
    Daniel Hanson May 11, 2010

    What does the scanner say the issue is?



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,392 Answers

Most likely a cam sensor as this is where the fuel injectors get their information from. Check for a bad fuse with your linking error as you may not have a signal at the DLC.

Posted on Mar 06, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

My mazda 626 wont start no fuel but when i spray starting flouid in it it starts please help

Sounds like your fuel pump has gone bad. Take it to a mechanic and they can check it.

Nov 11, 2015 | Mazda Cars & Trucks

1 Answer

Obo scanner gave me these codes p0171, p0201, p0202, p0203, p0204, p0321 and it wont start? please help i noe what the codes mean just dont noe what to go for

I will give you what the codes mean and you can then work out what to replace.
code p0171 refers to system too lean--bank 1===causes intake / exhaust leak---AIR system---MAF/VAF sensor---fuel pressure/pump---injector/s---HO2s
code p0201 refers to injector 1--circuit malfunction===causes--- wiring--injector ---ECM
code p0202 refers to injector 2 --circuit malfunction===causes --wiring---injector--ECM
code p0203efers to injector 3 --circuit malfunction===causes---wiring--- injector --ECM
code p0204 refers to injector 4 --circuit malfunction===causes ---wiring ---injector ---ECM
code po321 refers to crank shaft position (CKP) sensor/engine speed (RPM) sensor---range / performance problem===causes---air gap---metal particle contamination---insecure sensor /rotor --wiring---CKP/RPM sensor.

Jan 05, 2014 | Audi TT Cars & Trucks

2 Answers

My 2000 300m will crank but will not start i think the fuel pump is working battery seems weak also. the guy i bought it from said the fuel pump was out ?

95 should have an electronic pump alot of times if u take off the gas cap have some one turn the key to on accessorys you can hear the pump kick on,also remove the filter turn the key on see if the gas makes its way down the line or check at the intake(fuel injectors)

Nov 24, 2009 | 1995 Chrysler Sebring

2 Answers

1998 Isuzu Amigo is getting no gas to the injectors, fuel is present at the injectors, node lights are indicating no pulses at the injectors, ECU checks out to be good, spray fuel in the intake and it...

Just because there is fuel at the injectors doesn't mean there is any fuel pressure. You need to check your fuel pressure and if is low or non-exisitant then you either have a clogged fuel filter or a bad fuel pump.

Nov 17, 2009 | 1998 Isuzu Amigo

2 Answers

1994 Yukon running rich and flooding

Fuel pump circuit (low voltage)
Try replacing the fuel pump relay or testing it if you have the manual.

Sep 20, 2009 | 1994 GMC Yukon

1 Answer

Car turns over but wont start

you need to get your hands onto a diagnostics/scanner computer to check for cam and crank sensor problems. i believe if i am not mistaken loss of crank position signal will kill injector pulse. look for this signal with the scanner if nothing comes up then u have a bad sensor

Aug 22, 2009 | 1996 Chevrolet Cavalier

2 Answers

85 s-10 2.5l no fuel from the injectors

electronic engine control unit calculates the mass of fuel to inject, not how wide it sprays. It's the type of solenoid that you use. Some have wider spray nzzles than others. An external Fuel pump helps the delivery of the fuel. Also since fuel injectors rely on mass air flows nowadays, you have to have proper mixture coming through. hows your Fuel pressure regulator?

The throttle position sensor reports to the computer the position of the throttle butterfly valve, which the ECM uses to calculate the load upon the engine-but inorder for this to run, you may need an external pump.

Sounds like nothing is being grounded back to the ECM to even give a reading. If your regulator is improper and you do not have a external pump (depending on your model), than check those. If not, Start from scratch.

If you ever lose your way, go back to the beginning_REWIRE!


Feb 16, 2009 | 1985 Chevrolet S-10

Not finding what you are looking for?
1999 Chrysler 300M Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides