Question about 1998 Ford Escort

1 Answer

Where is crank shaft sensor 98 escourt - 1998 Ford Escort

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

where is crank shaft sensor 98 escourt - moz-screenshot.jpgThe sesor should be right on the left side of the motor above the bottom pully and harmonic balancer by the air pump. hope this helps

Posted on Mar 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where's the crank shaft sensor on a 98 ford taurus 3.0 dohc


should be bolted to the timing cover down by the crank pulled. if you look at the back side of the crank pulley you should see the exciter ring that the crank sensor uses to generate its signal.

Sep 05, 2015 | Ford Cars & Trucks

1 Answer

98 honda accord ex wont crank


check the wiring on the solenoid on top of your starter.and check your fuses.

Dec 18, 2013 | 1998 Honda Accord

1 Answer

98 chevorlet lumina runs good for about 15 to 20 minutes a shuts off


If the fuel pump is still making a noise and the engine doesn't start when hot. Possibe Crank Shaft Position Sensor. (not real nice to do) Can also be the ignition module but more often its the Crank Sensor. There are some simple tests if you are handy with cars?

Aug 05, 2011 | 1998 Chevrolet Lumina

1 Answer

98 anti theft will not let car crank have new key still will not start have tried everything


I recently had the same problem, I ended up changing the TWO crank shaft sensors and the big 40 Amp fuse under the hood. Everythings fine now. Hope this helps.

Jun 13, 2009 | 1997 Cadillac DeVille

1 Answer

No spark


Look at the back of the motor in the bell housing area. It reads off of the flywheel.
Here is a link to a site that shows the special tools to use when replacing timing belt.In the second pic where they show the plug,the electrical sensor right beside it is your sensor.

http://www.autobodytoolmart.com/PDocs/otc6486Instructions.pdf

Mar 05, 2009 | 1998 Ford Escort

1 Answer

Can anyone help with an intermittent starting issue with a '98 mercury mountaineer?


If the motor turns over, but not start. Have the "crank shaft sensor" checked/replaced Ford part# 184768 $27.98 parts $230.00 labor). I chased this problem for several years. The crank sensor finally failed completely and the mechanic was able to find the problem.
Good luck

Jan 12, 2009 | 1998 Mercury Mountaineer

1 Answer

98 escort 2lt.


Does this pertain to the Crank Shaft or the Ignition sensor? I've never heard of a crank sensor... I'll check...

I found this from a guy on another website..."It does however have a crank sensor and if you look at the lower crank pulley just to the back of the pulley and go around the pulley you should find the sensor mounted on a bracket. You should see what appears as a sprocket with widely spaced teeth on the engine side of the pulley. This "sprocket" so to speak is what the crank sensor "reads". I believe that the crank sensor is the only sensor used for engine timing. "

Good Luck

Oct 26, 2008 | 1998 Ford Escort

Not finding what you are looking for?
1998 Ford Escort Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...