Question about 2006 Honda Accord

1 Answer

% of Oillife is -540, but need to reset it to 100

I need to reset the %of oil life

Posted by on

  • patrick_ihez Mar 16, 2009

    Thanks, but I did exertly what you said, but I did not work. Any other help?



    Patrick

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

With the oil life % displayed, press the select/reset button (the button sticking out of the speedometer at the lower right) and hold for over 5 seconds. The % will reset to 100%

Posted on Mar 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford explorer trac 2007 change the oil and filter and now have a wrench light on ,how resolve the problem


Sounds like you need to reset your Oil life/ maintenance reminder light. (also, double check your oil level)

To reset Oil life on a standard dash stlye:
1. pres and release the TRIP/RESET button until the message center displays SETUP MENU HOLD RESET
2. Press and hold the TRIP/RESET button for 2 seconds until the message center displays RESET FOR SYS CHECK
3. press and hold the TRIP/RESET button for 2 seconds until the message center displays OIL LIFE xx% RESET IF NEW
4. Press and release the TRIP/RESET button until the message center displays HOLD RESET IF NEW OIL
5. Press and hold TRIP/RESET button for 2 seconds and release to reset oil life to 100%
6. Message center will briefly display OIL CHANGE SET TO 100%


With a message center cluster the procedure is as follows:
1. press and release SETUP button until message center displays PRESS RESET TO BEGIN SYSTEM CHECK
2. Press and release RESET button until the message center displays HOLD RESET IF NEW OIL
3. Press and hold RESET button for 2 seconds and release to reset the oil life to 100%
4. The message center displays SETUP MENU HOLD RESET


Hope this is what you need/ are looking for. Goodluck & let me know how it goes, or if you have a different problem.

Nov 03, 2013 | 2006 Ford Explorer

Tip

Cadillac service light 1989-01


Eldorado

2000-01

Turn the ignition to ON. Press the TRIP button on the driver information center (DIC) switch to view various menu choices and stop on OIL LIFE REMAINING. A message will display the percentage of oil life remaining. Press and hold the RESET button on the DIC switch for at least 2 seconds. A message will display the percentage of oil life remaining as 99 percent. The engine oil life monitor is now reset. Turn the ignition OFF.


DeVille,
Eldorado


1999

To reset the service Oil Life Indicator, display the
"OIL LIFE LEFT" message by pressing the "INFORMATION SKIP" (skip info) button. Press and hold the "RESET NO" (no info reset) button until "100% OIL LIFE" is displayed.


Deville,
Seville


2000-01

Turn the ignition to ON, Press the INFO button on the driver information center (DIC) to display ENGINE OIL LIFE. Press and hold the INFO RESET button on the DIC until the display reads 100% ENGINE OIL LIFE. The engine oil life index is now reset. Turn the ignition OFF.


Deville,
Seville,
Eldorado


1997-98

Display "ENGINE OIL LIFE" by pressing the "INFO" button. Press and hold the "INFO RESET" button until the message shows 100.


All Models
except
Fleetwood


1994-97

Press the "INFORMATION" button until "OIL LIFE LEFT" is displayed. Press the "RESET" button until "100" or "0.0 OIL LIFE LEFT" is displayed.


Fleetwood


1994-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds.


All Models,
Seville,
Eldorado


1993,
1994-95,
1994-95

The automatic transaxle message can be reset through the following procedure. If "CHANGE TRANSAXLE FLUID" appears on the Information Center, press and hold the "OFF" and "REAR DEFROST" buttons until "TRANS FLUID RESET" appears.


DeVille,
Fleetwood


1991-93

When "CHANGE OIL SOON" light is illuminated, press and hold the "RESET" and "RANGE" buttons on the Fuel Data Center for 5 to 60 seconds. When the buttons are released, the light will flash four times if it has been reset. If the light comes back on for more than 5 seconds, repeat the procedure.


Allante


1989-93

When "CHANGE OIL SOON" appears on the Driver Information Center, press the "RANGE" button until "OIL LIFE INDEX" shows on display. Then press and hold "AVG SPEED" and "RESET" (or "RANGE" on late models) buttons until display shows "100".


Seville,
Eldorado


1992-93

Press "INFORMATION" button on the Driver Information Center until "OIL LIFE INDEX" is displayed. Press "STORE/RECALL" until "OIL LIFE INDEX" resets to 100.


Seville,
Eldorado


1989-91

When "CHANGE OIL SOON" or "CHANGE ENGINE OIL SOON" appears on the Driver Information Center, press "ENG-DATA" button until the "OIL LIFE INDEX" appears. Then press the "ENG-DATA" button and the "RANGE" buttons at the same time until 100 displays (about 5 seconds).





















on Dec 07, 2009 | Cadillac Eldorado Cars & Trucks

1 Answer

How to reset oillife


As with most GM cars and trucks, you turn the key switch on but don't start the engine. Depress the gas pedal to the floor 3 times. The change oil light should flash. Turn the key off, then start the engine.
Check your owners manual for details.

Jun 23, 2013 | 2007 Hummer H2 SUT

2 Answers

I have a 2003 lincoln Aviator I recently just change my oil and put in Synthetic oli well on on the gauge a message came up saying "oil change is required' can someone solve this problem for me


1.press the setup control to enter system check then press setup control to display "oil life =***% hold reset = new.

2.press and hold the reset control for 2 seconds and release. "oil life is set to 100%" is displayed,

3.If lower oil life is desired, press and release the reset control to reduce the value.

Aug 28, 2011 | 2003 Lincoln Aviator

3 Answers

How do you reset the oil change required after oil change on a 2007 ford explorer sport trac limited?


Depending on your cluster its one of these...


Message Center Configuration
Oil Life Reset - Message Center Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days

  1. Press and release the SETUP button until the message center displays PRESS RESET TO BEGIN SYSTEM CHECK.
  2. Press and release the RESET button until the message center displays HOLD RESET IF NEW OIL.
  3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.
  4. The message center displays SETUP MENU HOLD RESET.
Oil Life Reset - Base Instrument Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days.

  1. Place the ignition in the RUN position with the engine off (KOEO).
  2. Press and release the TRIP/RESET button until SETUP MENU HOLD RESET is displayed.
  3. Press and hold the TRIP/RESET button until SYSTEM CHECK is displayed.
  4. Release the TRIP/RESET button.
  5. Press and release the TRIP/RESET button to scroll through the system check menu items until HOLD RESET IF NEW OIL is displayed.
  6. Press and hold the TRIP/RESET button until OIL LIFE SET TO 100% is displayed.
  7. Release the TRIP/RESET button. The oil life is now reset.
Oil Life Start Value - Message Center Cluster

NOTE: The oil life start value is used to reset the oil life value back to the maximum of approximately 8,000 km (5,000 miles) if the value was previously changed or to lower the value from the maximum (8,000 km
To reset the oil monitoring system to 100% after each oil change [approximately 5,000 miles (8,000 km) or 180 days] perform the following:
  1. Enter SYSTEM CHECK to display "OIL XXX% OIL LIFE OK".
  2. Press RESET control to display "HOLD RESET IF NEW OIL".
  3. Press and hold RESET control for more than 2 seconds. Oil life is set to 100% and "OIL CHANGE SET TO 100%" is displayed

Mar 06, 2011 | 2007 Ford Explorer Sport Trac

3 Answers

NEED TO RESET OIL CHANGE LIGHT


How to Reset the Engine Oil Life System
The Engine Oil Life System calculates when to change the engine oil and filter based on vehicle use. Whenever the oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where the oil is changed prior to a CHANGE ENGINE OIL SOON message being turned on, reset the system.
Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the Engine Oil Life System:
Display the OIL LIFE REMAINING on the DIC.
Press and hold the SET/RESET button on the DIC for more than five seconds. The oil life will change to 100%.
If the CHANGE ENGINE OIL SOON message comes back on when the vehicle is started, the Engine Oil Life System has not reset. Repeat the procedure.
Good luck and thanks for your question and I hope my suggestions help. burdfrenzy
Visit My eBay Store!
http://stores.ebay.com/Pittsburgh-Joes-Pants-Nat

Jan 03, 2011 | 2008 Chevrolet Impala

2 Answers

When Jiffy Lube changed the oil in my 2009 Ford Expedition, they did not reset the "Change Oil" message in the instrument panel. Since I set out on a trip immediately after the service, I can't...


You can leave it,it is a gadget,not tied to any system

You should have an owners manual (still) on a 2009

Never go the Jiffy Lube

Read all the damage and horror stories ,on quick change
places.

Dec 08, 2010 | Ford Expedition Cars & Trucks

1 Answer

Who do you reset change oil soon light on a 2009 f350


To reset the oil monitoring system to 100% after each oil change
(approximately 7,500 miles [12,000 km] or six months) perform the
following:
1. Press and release the
SELECT/RESET button to display
“OIL LIFE XXX% HOLD RESET =
NEW”.
2. Press and hold the
SELECT/RESET button for two
seconds and release. Oil life is set to
100% and “OIL LIFE SET TO 100%”
is displayed.
Note: To change oil life 100% miles value from 7,500 miles (12,000 km)
or six months to another value, proceed to Step 3.
3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the
SELECT/RESET button to change the oil life start value. Each release
and press will reduce the value by 10%.

Sep 30, 2009 | 2008 Ford F-350

2 Answers

How do you reset the oil life indication on 2005 cts


Follow this procedure to reset the GM Oil Life System ™:

Press the up or down arrow on the INFO button located to the right of the Driver Information Center (DIC) display to access the DIC menu.
Once 100% ENGINE OIL LIFE menu item is highlighted, press and hold the CLR button.
The percentage will return to 100 and the oil life indicator will be reset.
Repeat the steps if the percentage does not return to 100.


Navigation System
Follow this procedure to reset the GM Oil Life System ™:

Turn the system on by pressing the PWR/VOL knob once. The PWR/VOL knob is located to the lower left of the DIC display.
Press the INFO button located to the left of the display to access the Vehicle Information menu.
Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted. Press the knob once to select it.
Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in the upper right corner of the display.
The percentage will return to 100 and the oil life indicator will be reset.
Repeat the steps if the percentage does not return to 100.

Jul 14, 2009 | Cadillac CTS Cars & Trucks

1 Answer

A Display of this nature B OILLIFE 15% 1 15 Please what should I do as I have just changed my Engine Oil. My car typ is Honda 2006. Thanks


This is what helps the tech inspect your car. B Means to replace oil and oil filter. And inspect certain things on the vehical.

Sub systems
# 1 Means rotate tires and check tire pressure.
#5 Means Replace Coolant

What do you mean 15. Their is no 15 in the Maintenance Minder System.

To reset the Maintenance Minder System (your oil life) Make sure the oil life is displayed
#1 Press and hold the reset button for 10 seconds until the oil life flashes
#2 Press and hold the reset button for a additional 5 seconds.

Dec 13, 2008 | 2006 Honda Accord

Not finding what you are looking for?
2006 Honda Accord Logo

Related Topics:

174 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...