Question about 1996 Plymouth Breeze

1 Answer

Drive belt squeels, 96 Plymouth Breeze 2.4L

The belt squeels at startup, at stop lights and slowing down to turn a corner. Also sometimes when heater fan on high

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 27 Answers

Could be your altenator is going out? you can spray soap on the belt to make the squeel stop but you ge the altenator check. Most auto parts stores can check it for you with out having to remove it.

Posted on Mar 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starts rough then when shut off take time to start again and if i show down she start to stall


You have to look at vehicle data & do some testing.

You can't ask someone what anything is, on any product,
a guess isn't how things are figured out.

You could have a worn out fuel pump or a long over due
timing belt issue

Jul 08, 2012 | 1998 Plymouth Breeze

1 Answer

The heater works but when the defrosters are


The Air conditioner compressor is seizing when the compressor clutch trys to engage. When you put on the defroster the air conditioner automatically comes on to take humidity out of air.

Jul 24, 2010 | 1996 Plymouth Breeze

1 Answer

Serpentine belt on 96 breeze 2.4L


you can get step by step instructions from a chilton manual. i go to the library, and copy the page or pages i need. libraries have every chilton auto manuals. may have to rent a specialty tool for belt tensioner pulley. can be rented at any parts store, money is returned when tool is. usually 20 bucks. put tool on tension pulley, pull to loosen belt tension, with other hand slip belt off of alternator or easiest pulley to get to. before you take belt off take a mental picture of belt route. when installing new belt remember if pulley is smooth it contacts smooth side of belt.

Jan 09, 2010 | 1996 Plymouth Breeze

1 Answer

Squeeling belt when engine is cold


The belt is loose or worn and needs replacing or re-tentioned.

Nov 04, 2009 | 1998 Plymouth Breeze

1 Answer

Car shuts off


I would check the Idle Air Ctrl. valve.if not opening when coming to a stop eng will starve for air cause air is not bypassing the throttle plate when the plate is closed

Jul 07, 2009 | 1998 Plymouth Breeze

1 Answer

My 96 plymouth squeaks loudly when i turn or when


try squirting some brake fluid on the rubber bushing, should swell them up enough to stop the noise...but you should replace the bushings if orn badly..

Jun 08, 2009 | 1996 Plymouth Breeze

2 Answers

97 Jeep Wrangler Squealing LOUD!


The only thing I can think of is that the belt needs tightening. Check all the pulleys, sometimes if there are glazed it will give you the same problem. The misfire could be a bad ignition wire or a wire that got wet.

Dec 10, 2008 | 2005 Jeep Wrangler

3 Answers

Engine noise on area of pulleys and sometimes engine tries to sto


Don't know if this helps. Had squeel in belt area. Occasionally engine would stop when squeel got loud and sometimes engine would try to quit while going at various speeds. Found tensioner pulley was bad and changed it. Still squeeled and engine would stop when squeel got loud. This time while sitting in yard. Further checking found binding in power steering pump. Will be putting on new one tomorrow. Hope it works. Will update.

Nov 28, 2008 | 2004 Ford Freestar

Not finding what you are looking for?
1996 Plymouth Breeze Logo

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...