Question about 2006 Saturn Vue

1 Answer

Power locks driver side door will not lock or unlock with remote or switch on door 2006

Posted by on

  • Edward Pusateri
    Edward Pusateri Mar 06, 2009

    not door switch it opens all of the other doors thanks any way.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 110 Answers

Pull the switch out of the drivers door and check it or replace it. this solved my problem in my jeep, yes i had exactly the same problem. you might also change the fuse to i always do when i put in a new electronic piece like this.
good luck and let me know

Posted on Mar 05, 2009

  • brian tessereau Mar 07, 2009

    check the motor that operates the door switch inside the door. you will have to remove the door panel and there is either two or three screws that secure it to the door follow the lock rod back to it, unplug the connector and check for power going to it, if there is power then check the motor for resistence. let me know what you find out.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver side door will not lock/unlock with the remote, but the other doors will.


no you needs a new lock actuator on that door its about $90 installed,
all the locks are on same circuit . sorry about the bad news :(

May 01, 2016 | 2003 Hyundai Sonata

1 Answer

The drivers side cook lock does not lock or unlock using the remote. The other door do respond to the remote. What is the cause and solution?


Hi Charles

The drivers side door gets the most use
Check the actuator wiring coming through the door hinge
If it works from the key then the Power to the door is OK & the key switch is ok. Must be trigger wire from wireless device receiver!

Good Luck

Hyundai Door Lock Actuator eBay

Hyundai Entourage Alarms Remote Car Starters Keyless Entry Locks

Jul 08, 2015 | 2008 Hyundai Entourage

1 Answer

2004 chevy malibu driver and passenger door lock problems


The locks on your vehicle are electronically controlled by the BCM - body control module . The driver an passenger door switche's are input's to the BCM . Do you know anything about automotive electronic's ? anti theft alarm remote, could this be part of the problem , No it's just a key less entry remote , nothing to do with the anti-theft .
Door Lock System Components
The Power Door Lock System consists of the following components:
• Body control module (BCM)
• Driver door lock switch
• Front passenger door lock switch
• Door lock actuators in each of the doors
• IBCM (PWR) 15-amp fuse

Door Lock System Controls
The Power Door Lock System is controlled by the body control module (BCM) and can be activated by any one of the following:
• A door lock switch Lock or Unlock actuation
• A keyless entry transmitter actuation
• An automatic door lock actuation
• An automatic door unlock actuation
• A last door closed locking (LDCL) actuation

Driver and Passenger Door Unlock Operation w/o Keyless Entry
When the body control module (BCM) detects a transition of either of the door lock switches to the Unlock position, it switches the door lock actuator unlock control circuits to voltage. Since the door lock actuator lock control circuit is at ground potential within the BCM, the driver passenger door lock actuators transition to the Unlock position.

Your best bet , take your vehicle to a qualified repair shop ! Need special tool to diagnose .

Power Door Locks Inoperative

Install a scan tool.
Turn ON the ignition, with the engine OFF.
With a scan tool, observe the door lock switch parameter in the Doors data list.
Does the scan tool display Idle?
YES - Go to Step 4
NO - Go to Step 8
4
Activate the driver door lock switch to the LOCK and UNLOCK positions.
Does the scan tool display Idle?
YES - Go to Step 9
NO - Go to Step 5
5
Activate the front passenger door lock switch to the LOCK and UNLOCK positions.
Does the scan tool display Idle?
YES - Go to Step 9
NO - Go to Step 6
6
With a scan tool, observe the driver door lock actuator command and the passenger door lock actuator command parameters in the Doors data list.
Activate a door lock switch to the LOCK and UNLOCK positions.

Dec 24, 2017 | 2009 Chevrolet Malibu

1 Answer

I have a 2006 Chevy Cobalt that I bought used. Didn't have the remote for the door locks. I can unlock all of the doors from the driver's side, however I can't lock them. Any suggestions?


check the lock side of the switch, its not connecting, remove the switch and test it, if the doors will unlock its letting you know the plungers are working, and that to lock its not getting any power to reverse the action, ( check the individual doors, if they work both ways,, then its the drivers door switch that's faulty

Aug 10, 2011 | 2007 Chevrolet Cobalt Coupe

1 Answer

I have a 2006 GMC Envoy Denali. The power locks on both the rear passenger side wont unlock automatically. i have to manually unlock it. although the automatic lock option works. All the other doors work...


both the rear passenger side wont unlock ???? How many doors are on the passenger side ? Or both back doors don't unlock ? Two relays lock / unlock the back door's Not the lift gate . The BCM controls the relay's . The relay's are located in the rear fuse box . Under back seat .

Oct 24, 2017 | 2006 GMC Envoy Xl

1 Answer

Hi I want to program a new keyless fob. I have the original fob that works great.Do I need to do anything to the original key when I program the new fob? 2006 nissan altima


1. Close and lock all doors with the driver’s side power lock/unlock switch.

2. Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard
Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder
each time. If this procedure is performed too fast, system will not enter programming mode.

3. Insert key into the ignition cylinder and turn to the ACC position.

4. Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press
the button more than one time in the above step. If the button is pressed more than one time, the programming
procedure will not be successful.


5. If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side
power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should
flash. Repeat this step for each transmitter (including any existing transmitters).

6. Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

Nov 16, 2009 | 2006 Nissan Altima

2 Answers

Drivers Door Lock Problem


Press the passenger side door lock button. if the driver side door unlocks now but wont unlock when you hit the driver side door lock button, it is usually a network communication problem with the B CAN or a faulty Body Control Module.

May 01, 2009 | Honda Accord Cars & Trucks

1 Answer

Power door locks; unlock but not lock.


replace switch. if problem on all doors replace master on driver side door. switch has two modes: lock & unlock. Unlock is working, lock is not working, means power is good, individual switches are good, master switch is bad. Replace from used car fine.

Apr 23, 2009 | 1997 Ford Explorer AWD

Not finding what you are looking for?
2006 Saturn Vue Logo

253 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...