Question about Ford Bronco

Open Question

1979 Ford Bronco tailgate regulator window

Correction...How do I remove and install the tailgate window regulator on my 1979 Ford Bronco?

Posted by on

  • Anonymous May 04, 2009

    Correction...How do I remove and install the tailgate window regulator on my 1979 Ford Bronco?

×

1 Suggested Answer

c17hydro
  • 2984 Answers

SOURCE: How do I remove and install the window regulator

Pull the door panel off and simply take your time and remove the regulator from within the door. Pretty simple.

Posted on Mar 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove tailgatein 89 Bronco


A Bronco tailgate comes off the same as a regular pickup truck. Open the tailgate and remove the cables from both sides. Lift up the passenger side of the tailgate and then slide the driver side towards the passenger side.

Apr 25, 2014 | Ford Bronco Cars & Trucks

1 Answer

1989 FORD BRONCO. REAR WINDOW STUCK IN UP POSITION AND MOTOR IS DEAD. HOW DO I GET THE WINDOW DOWN SO THAT I CAN DROP THE TAILGATE?


you have to climb over back seat and pull panel off tailgate pull the motor out and let window down by hand .

Sep 16, 2012 | 1989 Ford Bronco

1 Answer

How do you remove the rear window motor in the tailgate of my 89 ford bronco. I took off the inside panel to be able to see the inside but from there don't see the motor and how to get further into the...


there is about 3 rivets that you have to cut off,that holds the window motor and regulator to the tailgate,then shift the window back and forth to get the track slides to slide out then pull the window out slowly,it will catch when its almost out so be careful.

Nov 13, 2009 | 1989 Ford Bronco

2 Answers

1989 ford bronco back window went down but wont go back up, when i hit the down switch i can hear it workin like it would go down further but its already all the way, but when i hit the switch up nothing...


Then the plastic plugs in the motor have disintgrated, you will need to remove the motor and either replace the motor or install new plugs in the motor.

Nov 07, 2009 | 1989 Ford Bronco

1 Answer

Tailgate regulator...can't get to it because window is down


open the tailgate... pull the window up with your hands, and take out the gear. its a round plastic gear and i had the same problem... mine was completely shattered and its about 12 bucks to replace

Apr 15, 2009 | 1990 Ford Bronco

1 Answer

How do I remove and install the window regulator in my 1979 Ford Bronco?


Pull the door panel off and simply take your time and remove the regulator from within the door. Pretty simple.

Mar 05, 2009 | Ford Bronco Cars & Trucks

1 Answer

Replace motor on tailgate window on a 1987 ford bronco


You will likely have to remove the panel from the inside with the window up. Once you have the panel off I would try to have some one hold down on the switch while you tap the motor with a hammer. Of course make sure the latches are all the way closed as if the door is not closed all the way the window will not roll down as it has safety switches to keep this from happening.

If you still can not get it down then you will need to unbolt the regulator and let it down that way.

Jan 14, 2009 | 1987 Ford Bronco

1 Answer

Tailgate window motor


You must detrim the tailgate and then remove the glass and then the entire regulator assembly must be pulled to change out the motor.

Nov 21, 2008 | Ford Bronco Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

332 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

66126 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5363 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...