I found the problem on my Dodge Ram van.. The button for the hazard lights was bad.. I tuned on the hazard lights and only had one side, so i jiggled it and the other side came on. Then I pushed in the hazard button to turn them off and proceeded to check the brake lights, the still did not work so I again jiggled the hazard button and whaaalaaa the brake lights would flicker on and off.. I have a piece of cardboard pushing the button to the side to hold pressure on it keeping my brake light connection until I can get me a new hazzard switch.. Hope this helps..
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had a similiar problem on my 1999 Dodge Ram 1500 Conversion Van. It ended up being a partial collapse of the catalytic converter which didn't allow adequate exhaust. The problem only showed itself because I could not get over 55 mph going up a small hill.
Are the brake shoes on right, there are two size shoes, One shoe has a longer brake lining then the other. The short brake lining is towards the front of the van and the longer brake lining is towards the rear. The rear brakes also may need to be adjusted, you can do that by going in revers in a empty parking lot and push the brakes as hard as you can to stop the van. Don't give your self a whip lash, just push down gradually and as far to the floor you can about 7 to 10 times. The self adjusters should adjust the brake on both sides, try this first before you take the brakes apart again. It may just need a adjustment and after that check the brake fluid in the master cylinder. Good luck and hope this helps. Keep me posted, be glad to help
well maybe you unhooked the brake switch look above you brake pedal you will see a switch with a wire like hook going to the pedal arm don't be surprised if that's what is I seen lots of people hit them changing fuses unintentionally!good luck hope this helps