Question about 1994 Jeep Grand Cherokee
Best bet is to get the fuel pressure, Not sure about yours but most have whats called a shrader valve on the fuel rail, so get or borrow a fuel pressure gauge, screw it on the valve or plum it in-line on the system. Once that is done turn your key to the on position and check the guage it should read up around 40 to 65 psi depending on the specks of the truck. If it does start the truck and watch the guage for any irregularitys such as the neddle bounching and so on. A nother eays check just to cover the basis if after all this complete, turn off thruck and watch guage. Make sure it hold pressure, if not i would start to look toward injector o-rings. If it is not holding pressure it can simulate a hard stsrt associated with and some times confused for a faulty fuel pump.
Posted on Mar 05, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 30, 2016 | Cars & Trucks
Feb 12, 2015 | 1990 Ford F250
May 15, 2014 | Cars & Trucks
Mar 23, 2014 | 1985 Toyota Celica
Mar 28, 2013 | Cars & Trucks
May 05, 2011 | Toyota Sequoia Cars & Trucks
Jan 28, 2010 | 1995 Volkswagen Jetta
Dec 20, 2009 | 2004 Dodge Ram 2500
71 people viewed this question
Usually answered in minutes!