Question about 1996 Buick Park Avenue

1 Answer

96 park avenue wont start..engine says nothing...jumped solinoid and car starts for a second and cuts back off...please help !

Posted by on

  • twish293 Mar 05, 2009

    Car can be driven , but eventually just stops - usually in the middle of a busy street - then has to be pushed or towed. Later it will start, maybe driven, but eventually repeats the problem. New fuel pump, but engine appears to not be getting fuel. Local mechanic has 6-8 hrs in it and has given up. Beieives its an electrical problem, but can not track it down

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,055 Answers

Try a new ing resister abou 10.00 at the parts store easy install

Posted on Mar 05, 2009

  • Dennis Mulford
    Dennis Mulford Mar 05, 2009

    sorry i thought that you had a chyerlser, for get the resister,

    the problem with it is probly the fuesable link or the ignition fuse in the main fuse block

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine light wont come when turn ignition and wont start


HAVE YOU TRIED TO JUMP START IT? DOES IT MAKE ANY NOISE AT ALL WHEN TRYING TO START IT? IF YOU HAVE AN OLD BATTERY, I WOULD START THERE FIRST. I WOULD TRY TO JUMP START IT FIRST. IF THAT DOESNT WORK, TAKE THE BATTERY OUT TO AUTOZONE AND THEY WILL TESTY IT FOR FREE

Aug 24, 2013 | 1991 Buick Park Avenue

1 Answer

Replaced crankshaft sensor now car wont start just turns over


could be ignition module or corrision between module and mounting service.clean and use dielectric greas

Jul 26, 2012 | 1992 Buick Park Avenue

2 Answers

96 buick park avenue wont start but turns ova theres no gas gettin to the engine


you probaly have a bad crank sensor. this will not let the fuel pump kick in if it goes bad

Apr 20, 2012 | 1996 Buick Park Avenue

1 Answer

What is causing my Toyota corona to stall when parked at the lights also why is it that it requires a jump start every time to work again when issue occurs, could this be a battery failure or engine f


If you had the battery checked and was good, you should have had the charging system/alternator checked as well. My definite thought here is that the charging system/alternator is not working to recharge the battery. After jump start, there is just enough power in the battery to run the engine and nothing else. It stalls at a light because your foot on the brake to stop is powering the brake lights and that removes power from the engine making it die. Replace the alternator. Done. No more problem.

Nov 12, 2017 | Cars & Trucks

1 Answer

Car wont even turn over i turn key on and all lights come on and i try to start by jumping starter but only turns on for a second then shus right off again my key is broken but i was starting it with a...


Take off the alternator and have it checked at a parts store.When the alternator stops working,your car runs off battery power,which it will quickly drain.Your cars starts from the battery and then continues to run off of the alternator,charging the battery for reserves.

Oct 02, 2010 | 1995 Buick Park Avenue

1 Answer

2000 buick park avenue where are the vaccum hoses located on the evap sytem my check engine wont go off codep0442


that code is indigitus to the purge solinoid
if the purge solinoid gets stuck or fails you get a red light follow the lines that come off the engine the purge is eather on the back of the engine or firewall
also check you steel lines under your car to make sure that you don.t have a bent or hole in them also check or have you cap checked

Mar 09, 2010 | 2000 Buick Park Avenue

1 Answer

Car want start


If it cranks and then die, the typical resistor trick won't work. Same problem as I had on mine and this is the only thing that was able to save it: http://newrockies.ca/vatsbypass

Jun 11, 2009 | 1992 Buick Park Avenue

1 Answer

1999 buick lesabre wont start


my 1999 buick lasaber wont take a charge

Dec 24, 2008 | 1999 Buick Park Avenue

Not finding what you are looking for?
1996 Buick Park Avenue Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

77514 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...