Question about 2004 Mitsubishi Endeavor

2 Answers

On my 2004 Endevor, change the spark plugs reuires removing what?

I have talked to a couple of garages, and I get different answers on what I have to remove in order to replace the spark plugs.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

To get to the rear spark plugs you have to remove the intake plentum (Black plactic piece on top of motor)

Posted on Mar 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Where is the number 5 cyclider in a mitsubishi Endeavor?

Posted on Mar 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I change spark plugs


I am guessing this is a 6 cylinder. You will need a spark plug removal socket. Usually 5/8 with a rubber fitting in the top of it to grab onto the spark plug. Locate your distribution center where the six wires feed out to the spark plugs. If you follow one of them you will get to the end where the spark plug is. Remove the rubber boot and that will expose the spark plug head. Get a ratchet, put on the socket and remove the plug. That is the easy explanation. Getting to the plugs may be difficult with what is in the way. You may need to remove manifolds or other things in the way first. From there you may need a couple of different socket extensions or knuckles to get into them. Let me know if you have any other questions.

Oct 15, 2013 | 1998 Oldsmobile Intrigue

2 Answers

The transmission stop woking.


Is there any more detail ? because its not clear

Dec 07, 2010 | 2004 Mitsubishi Endeavor

1 Answer

How do I remove the OHC to change the spark plugs and wires


Welcome to FIxYa.com

No do not remove OHC pull on the boots Spark plug boots then use a spark plug socket with extension

Regards, Lee Davidian


A Four Thumbs up ^^^^ is appreciated for answering your question. And please take the time to rate me by leaving a testimony. Thank you, Lee Davidian

Oct 15, 2010 | 2004 Hyundai Santa Fe

2 Answers

Does this engine use spark plugs?


if it isnt a diesel and it runs on gas yes it has spark plugs

Nov 09, 2009 | 2004 Ford F350

1 Answer

How to change the spark plugs in a 2004 Chrysler


get a haynes manual for a charger it has steps for the v6 to remove the **** to get to your spark plugs

Jul 12, 2009 | 2004 Chrysler Pacifica

1 Answer

How to change spark plugs on hyundai 2004 2.4L


Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.

Apr 30, 2009 | 2004 Hyundai Santa Fe

1 Answer

Change spark plugs


My 2004 Verona had factory installed "NGK BKUR6ETB" regular spark plugs which I replaced at 30,000 miles. The 2005 model year is supposed to have Iridium spark plugs. To replace the spark plugs: 1. Remove plastic top engine cover. 5 nuts 10mm socket. 2. Unplug connector from each ignition coil. qty 6. 3. remove 2 hold down bolts per ignition coil. 10mm socket. 4. remove ignition coil, lifting straight up. 5. Spark plug is now accessible, use deep well 5/8 spark plug socket to remove.

May 15, 2008 | 2004 Suzuki Verona

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

1,071 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...