Question about 2003 Jeep Grand Cherokee

1 Answer

Missing when warmed up

Have 2003 grand cherokee. It was missing and it cam up with codes p0051 p0205 and I had them replaced. Now is is wrose then ever, it splits and misses only when it get warm and at idle it shakes the truck. Again the reading is the same codes.

Posted by on

  • cwiard Mar 05, 2009

    Thanks but I have 110k on this and I bought it used with no warranty. Any other peole having any type of problem. Check engine light blinks when the it spits and spats. If you turn truck off and restart again it is fine check engine light still on but then with 5 minutes back to the same thing.

  • carhob May 11, 2010

    bring it back to where you had them replaced,have them fix it properly, should have a warranty!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 366 Answers

Ok,so theres no warr. on the repair you had done,your p0205 code is a problem with injector on cyl.5,could be inj.itself or elec.circuit,and thats your main problem,you can take a chance change inj.or bring it to a good mech.,who will hook up a special diag.scan tool to cars comp.and take readings while engines running to pin point problem exactly!thats up to you.

Posted on Mar 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm getting a p0205 code


Have a look at this thread. It may help you. It has some diagrams posted so maybe you should recheck the harness.

Mar 31, 2014 | Dodge Grand Caravan Cars & Trucks

1 Answer

1996 jeep grand cherokee 5.2. Sometimes will stall at red light. Turn off ignition and fires right back up. Also, misses when going up a hill. almost as if the power is being shut off. A FEW MISSES AND...


Mine too.same year and make. O2 sensors changed,crank sensor changed,,"No Help. Had to 3 garages and Jeep service NO HELP just a lighter wallet. Bill

Aug 30, 2013 | 1996 Jeep Grand Cherokee

1 Answer

I have a 2003 Jeep Grand Cherokee 6 cyl. I am getting fault codes P0351,P0352 and P0353 which is defined as #1,#2 and#3 ignition coil circuit and code P0505 JEEP Idle Control System Malfunction and code...


I would check Cam Position Sensor as is directly related with ignition. Power loss is due to the ECU going on "limp mode" to prevent further damage.
I hope this helps!

Mar 26, 2013 | 2003 Jeep Grand Cherokee

1 Answer

Getting code po205 and po305 on 2003 grand jeep cherokee


Code 205 is for a problem with the injector on cylinder 5 and code 305 is for a miss or loss of power on the same cylinder.
I would check that injector next.

Dec 24, 2012 | 2003 Jeep Grand Cherokee

1 Answer

Just replaced all 4 o2 sensors and it is still giving me these codes... p0031 p0202 p0051 p0302 p0136


Check the air flow metre on the air box and all connections on the O2 sensors

Jul 30, 2011 | 2004 Jeep Grand Cherokee

1 Answer

Sensor oxigen jeep cheroke 2003 dtc po155 and poo51


hi this is what the codes read
p0155 can be ECM, wireing to the H020s

p0051 can be ECM wireing short to eath or H020s sensor

cheers jay

Jun 23, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Jeep Hesitates. P0303 code


Check the cylinders Commpression. over 115 psi is good, 120 psi is normal.

Sep 17, 2008 | 2001 Jeep Grand Cherokee

Not finding what you are looking for?
2003 Jeep Grand Cherokee Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...