Question about 2004 Dodge Sprinter

Open Question

04 Dodge Sprinter,where is the oil pressure sending unit located?

Want to install bypass oil filter, need to find supply point. Thanks

Posted by on

5 Suggested Answers

  • 512 Answers

SOURCE: oil change, 2007 sprinter

it is telling you which direction to turn it to tighten the cap

Posted on Oct 05, 2008

SOURCE: oil sending unit

I have heard sludge buildup can be an issue with Dodge engines in Durangos. Make sure sludge is not blocking oil flow and reducing pressure.

Posted on Nov 07, 2008

  • 35 Answers

SOURCE: 2004 Grand Cherokee: oil pressure fluctuates

if you know for certain that the sending unit is correct and the guage is accurate, then yiu may have big problems.....while the engine is running open the oil filler hole.. is everything wet with oil? or does it look dry or just a little lubed? you can allways install an aftermarket oil pressure guage(crappy tire) if you get the same results with that then you may have a week oil pump....worst case scenerio... need an engine rebuild as the moter may have wear issues.does the pressure slowly drop as the motor warms up? at idle ? does it jump up when you step on the gas?

Posted on Mar 30, 2009

michigan man
  • 3533 Answers

SOURCE: Where is the oil sending unit on a 2002 dodge ram 1500 4.7 L?

it normally is located near the oil filter it looks like a little plug with a wire on it

Posted on Apr 04, 2009

  • 1 Answer

SOURCE: oil pressure sending unit location

oil pressure sending unit show location on 2000 dodge caravan V-6

Posted on Nov 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lwhere is oil pressure sending unit on 2006 dakota v6 located?


Location of the OPS unit is at the rear of engine near the distributor. (OPS) oil pressure sending

Jul 11, 2014 | 2004 Dodge Stratus

1 Answer

I need to replace the oil sender switch on my 2002 Buick La Sabre


first need to buy oil pressure sending unit 3/8 deep socket remove oil pressure sending unit you need teflon tap sealer for oil sending unit threads.okay to replace oil pressure sending unit.you need safe raise support vechicle locate oil pressure sending unit next to the oil filter.disconnect oil pressure sending unit wire connector then use oil pressure sending unit 3/8 socket remove the sending unit.then take new oil pressure sending unit use teflon tape white plumbers tape or use thread sealer apply to the oil pressure sending unit threads then install new oil pressure sending unit and reconnect electrical connector to sending unit.then crank engine check for oil leak if all is good lower vechicle back to ground wait several minutes check engine oil level.you good to roll.

Feb 09, 2013 | 2002 Buick LeSabre

1 Answer

Where is the oil pressure sending unit located on a dodge ram 1500 with a 5.7 hemi and how difficult is it to replace


the oil pressure sending unit is by the oil filter and they are very easy to replace about 30 minute job

Sep 24, 2010 | Dodge Ram 1500 Cars & Trucks

1 Answer

Have 2001 dodge dakota showing low oil pressure by meter not light error code shows p done


install a new oil sending unit and change oil and filter should take care of it,oil sending unit is around the oil filter area

Dec 03, 2009 | 2001 Dodge Dakota

1 Answer

Location of oil pressure sending unit, 1995 3.8L dodge Caravan.


I belive the oil pressure switch is located by the oil filter on this unit.

Aug 22, 2009 | 2005 Dodge Caravan

1 Answer

Where is the oil sending unit on a 2002 dodge ram 1500 4.7 L?


it normally is located near the oil filter it looks like a little plug with a wire on it

Mar 31, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Oil pressure sending unit location


oil pressure sending unit show location on 2000 dodge caravan V-6

Mar 23, 2009 | 1997 Dodge Stratus

1 Answer

Oil Pressure


please befor you destroy the engine , have an oil pressure gage installed where your sending unit is to be sure you have enough oil pressure to even be driving the truck at all. on a hot motor at idle you should have at least 15 psi. at 2000 rpm you could have as much as 60 psi

Mar 14, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Where is the oil sending unit located on a 93 ford taurus??


The oil pressure sending unit is located behind the oil filter.

Jan 31, 2009 | 1997 Dodge Avenger

5 Answers

Where is the oil pressure sending unit on 2004 dodge stratus?


per the Haynes manual for the 95-05 Dodge Stratus on the 2.0L & 2.4L DOHC 4 cyl engines, the oil pressure sending unit is located at the left end of the rear side of the block. On 2.4L SOHC 4 cyl engines, the sending unit is located at the left end of the rear side of the block. On 2.5L & 3.0L V6 engines, the sending unit is located on the oil filter housing, on the front side of the block. On 2.7L V6 engines, the sending unit is located at the left end of the rear side of the block. To access it, remove the heat shield.

Jan 23, 2009 | 2004 Dodge Stratus

Not finding what you are looking for?
2004 Dodge Sprinter Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...