Question about 2008 Toyota Tundra

2 Answers

Need to replace cargo & third break light how do i

Need to replace cargo & third break light on '08 Toyota Tundra SR5. how do i remove fixture from cab?

Posted by on

  • Anonymous Mar 19, 2014

    dont know how to take out the cargo ligth , does not come out?

  • Anonymous Mar 19, 2014

    i want to replace the cargo ligth and the ligth does not come out

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

If its the same as an 06 Tundra, you should be able to remove the lense cover from the back of your truck cab with a screwdriver and pull the light bulbs out...Do not remove the screws below the lense cover that removes the fixture, they have a screw insert that will fall into your truck's body and get lost.....hehehehe I learned that from my own experience...good luck!

Posted on Apr 01, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 5,158 Answers

Is there not an inspection cover inside the cab that you can remove to give you access to those bulbs ?

Posted on Mar 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My truck will turn over but won't start


Toyota Tundra Maintenance & Repair Questions - CarGurus

www.cargurus.com > Questions > Toyota > Tundra

CarGurusfrustrated2000tundra asked a 2000 Toyota Tundra 2 Dr SR5 V8 4WD Standard Cab LB Maintenance ... My 2000 tundrasr5 4.7l 4x4 wont start! ... 2008 Toyota Tundra ...won't Start ... Report. rckwll asked a 2001 Toyota Tundra Maintenance & Repair question 2 months ago ... 2002 Toyota Tundra Turns Over But Will Not Start.

Toyota Tundra Questions - CarGurus

www.cargurus.com > Questions > Toyota

CarGurusGet fast answers to your Toyota Tundra questions from experts in the CarGurus automotive ... My 2000 tundrasr5 4.7l 4x4 wont start! Thought wasn't getting fuel because tries to turn over but wont. ... Tundra Dead Battery, How Do I Open The Door Or Hood To Recharge? ... 4wd Hi Light Flashing, But Will Not Engage.

Jan 22, 2016 | 2001 Toyota Tundra

1 Answer

Why won't my cargo light go off on my 2007 Toyota


Two possibilities:

1. The switch on the light is set to be on all the time.

2. The door switch is not functioning correctly. Find the switch and try depressing it manually and see if you can get the light to turn off. If so, replace the switch.

Apr 05, 2012 | 2007 Toyota Tundra

1 Answer

Fuse Panel Diagram needed for a Toyota Tundra 2006 SR5. Bought truck second hand and panel missing.


I have 2006 toyota tundra that the cir. lighter in front passager side and the onces on rears would work even those i replace the fuse.

May 10, 2011 | Toyota Tundra Cars & Trucks

1 Answer

MISFIRE # 1 WHAT SIDE IS IT ON WHICH SIDE IS THE # 1 PLUG ON


The left (drivers) side cylinder head is numbered from front (radiator)
1-3-5-7

The right (passenger) side cylinder head is numbered from front
2-4-6-8

per 2001 Toyota repair manual page EM-103 and 105. The numbers are not on the engine, from what I can see, but the manual is very specific on this info.
2001 Toyota Tundra Access Cab SR5 2WD
4.7 liter DOHC V-8 (2UZ-FE)92780649.gif 2001 Toyota Tundra Access Cab SR5 2WD
3.4 liter DOHC V-6 (5VZ-FE) 92873946.gif
http://autorepair.about.com/library/firing_orders/bl-toyota-firing-01.htm

Jan 18, 2011 | 2001 Toyota Tundra

1 Answer

I can't figure out how to get my 2003 Tundra taillight assembly off . I have removed the two bolts inside the tailgate area but it is still attached to the fender on the other side of the assembly . I have...


Unscrew the screws that are securing the brake light cover to the body of the Tundra. Pull the brake light cover off the body of the Tundra. Place the screws in the brake light cover and set it on the bed of the truck. Pull the burned-out light bulb out of the light fixture and discard it. Insert the new brake light bulb into the light fixture. Pump the Tundra's brakes to make sure the new bulb is working correctly. Replace the brake light cover on the body of the Tundra and replace the screws.

Sep 09, 2010 | 2003 Toyota Tundra

1 Answer

On adjusting headlight on 08 tundra does clockwise


clock wise should pull light up. counter clock wise should tilt down

Mar 07, 2010 | 2008 Toyota Tundra

Not finding what you are looking for?
2008 Toyota Tundra Logo

Related Topics:

400 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...