Question about 1999 Ford Taurus

1 Answer

Turn signal problems

Driver side turn signal blinks fast in front and doesn't blink at all in the back, replaced both back bulbs and still not working.

Posted by on

  • df2770 Mar 10, 2009

    2006 Dodge Magnum Left Rear turn signal does not work Front Left Flashes fast. Need help?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Turn signals have a relay (its a small switch that charges and discharges current) which controls your turn signals blinking speed and interval. This is most likely your problem. You should be able to get a new one at your local parts store. Follow these instructions, in this order, and let me know how it works.

Step 1:Turn on the hazard lights and walk around the Taurus checking that all four turn signal lights are working. If any of them are not working, replace the bulbs. A non-working bulb in any of the turn signals will often make the turn signals appear that a flasher is going bad.

Step 2:
Locate the fuse box and check the fuses for the turn signals. There may be more than one. Replace any fuses that are blown and then recheck the turn signals again. If they still aren't working properly, then move on to replace the flasher. Step 3: Look for a round, silver-colored object near the fuse box. Put your finger on the object and turn on the turn signal. You should be able to feel a mechanical clicking as the turn signal blinks. This is the flasher. Step 4: Pull the silver flasher out of the socket and replace it with the new one. Each of the flashers should have two pins sticking out of the bottom side. Start the Taurus and recheck the turn signals to ensure that they work. Joel

Posted on Mar 04, 2009

6 Suggested Answers

  • 1596 Answers

SOURCE: rear turn signals don't work

Hello There ,
I will Try my best to Walk you through this , Ok We Need to Know If ALL that's Not Working In the rear is Turn Signals? You need a Helper to look 1.First for Tail Lights 2. Next BRAKE Lights apply Brakes and have Helper see.
This Points to A BAD GROUND in A CAR This is Usually In the Trunk Fallow Wires FROM TAIL LIGHT Assembly and Look for Anything Out of Ordinary with Wires such as Corrosion Anywhere Clean and REPLACE Section of wire if Nessesary. On GM Vehicles there Is A GROUND WIRE SCREWED or BOLTED to Trunk FLOOR or SIDE RAILS We Must RULE OUT BAD GROUND. After this Comes the Parts CO$T.This May Very well Stop Here and FixYa. If Not we make sure FRONTS are Working. Bad Ground in the Trunk happens a lot Especialy When we Carry A Lot Of Things in the trunk. LOOK UNDER TRUNK LINER and BEHIND CARDBOARD SIDE Covers. Is there a Trailer Hitch & plug if so liminate the Trailer Plug Wires as the Problem. We would Rather WASTE a Little time At a Chance of SAVING MONEY Than WAIST MONEY Now AFTER a FULL Inspection. the Problem May be Found and Repaired at this Point, if so Good if Not Problem is Most Likley The Turn Signal Switch itself or Multifunction Switch
SIR CAUTION You Must Disconnect Battery Terminals + & - While Replacing this Switch
So as to Not Accedentaly DEPLOY AIRBAG WHILE Performing this Repair



Multifunction, Turn Signal Switch Replacement
Removal Procedure

Caution: Refer to SIR Caution in Service Precautions.

  1. Disable the SIR system.
  2. Remove the upper and lower trim covers
    1. Tilt the column to the CENTER position.
    2. Disconnect the connectors from the turn signal and multifunction switch assembly. Remove 2 pan head tapping screws from the turn signal and multifunction switch assembly.
    3. Remove the turn signal and multifunction switch assembly.
Installation Procedure

Important: The electrical contact on the turn signal and multifunction switch assembly must rest on the turn signal cancel cam assembly.

6. Install the turn signal and multifunction switch assembly. Notice: Refer to Fastener Notice in Service Precautions
      1. Secure by using 2 pan head tapping screws.
        • Tighten the screw on the top of the column to 3 Nm (27 inch lbs.).
        • Tighten the screw in the front to 7 Nm (62 inch lbs.).
      1. Connect the connectors to the turn signal and multifunction switch assembly.
      2. Install the upper and lower trim covers.
      3. Reconnect Battery
I Truely Hope This Remidies Your Problem If so Please Rate Me Accordingly Thank you RejakWilson

Posted on Jan 29, 2009

  • 1201 Answers

SOURCE: Turn signal blinks too fast

Try changing the flasher, it's in the fuse box, round in shape, and either blue or silver in color.The 4 way flasher is the same shape, to be sure you get the right one, put the left signal on and put your finger on it, if you feel it clicking, you have the right one.

Posted on Apr 02, 2009

kidspeedy
  • 321 Answers

SOURCE: left rear turn signal light on my 1999 chev. s10 is not working

any increase in bink speed is direcly related to a bulb being burt out.

Posted on Jun 12, 2009

  • 5 Answers

SOURCE: Chevy Cavalier 2001 turn signal blinks fast

If new bulbs don't work, it is probably the harness that holds the bulb. I had to replace both on my car after fighting with the problem for over a year and not knowing.

Posted on Mar 19, 2009

  • 36 Answers

SOURCE: Left turn signal blinks fast in rear and regular in front

Very simple the bulb is out. When the blinker does that its telling you the bulb needs to be replaced

Posted on May 17, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kia turn signal works but blinks fast on right side when parking lights are on


turn on park lights and signal on right side and take a good look at the front and rear light , see if one is dimmer than the other this may be due to a bad ground and when the park lights are on and drawing more power it also needs better ground, check the sockets front and rear try wiggling the bulb to see which one is causing the problem

Jan 04, 2013 | Cars & Trucks

1 Answer

Replaced the bulb in my 2007 Kia Sedona but the turn signal still doesn't work and it still blinks very fast.


Double check the bulbs on front and back on the side that is blinking fast. This still sounds like a case of a faulty bulb... Good Luck

Aug 17, 2011 | Kia Sedona Cars & Trucks

1 Answer

Front left turn signal blinking fast


If the front signal is blinking fast then theres a bulb out, check the rear to see if theres a bulb out, use the right side to see how many light are blinking and make sure the same is on the left, the main reason for fast blinking signal is a bulb is out on that side. good luck, have a nice day.

Jan 14, 2011 | 2006 Chevrolet Uplander

6 Answers

Signal light blinking too fast


I just had that problem with my jeep cherokee and either your bulb has burned out or it is burning out. Time to replace it. Turn the signal light lever on the side that's flashing fast, get out of the vehicle and look at the front and back signal lights and replace the one that isn't blinking...hope this helps.


Feb 23, 2010 | 2000 Nissan Maxima

1 Answer

Turn signal light staying on in front driver side and back turn signal light blinking too fast on driver side in back. All bulbs good.


Double check your front drivers side bulb sounds to me like the bulb is bad. It may look ok but could be bad. You might try swapping bulbs between the right and left front lights to test it. If the problem moves to the other side then you've found your problem. Good luck.

Nov 03, 2009 | 1998 Buick Century

2 Answers

2002 Hyundai elantra driver side turn signal not working outside


This simply means that the front driver side turn signal bulb has failed. Replace it.

Oct 28, 2009 | 2000 Nissan Maxima

2 Answers

Turn signals are blinking fast and the front signals don't blink


The bulb sockets are melted (not the bulb) - go to the junk yard and pick up a couple and keep a couple in your glove box - Have the same problem.

Sep 06, 2009 | 1998 Oldsmobile Intrigue

1 Answer

Left Signal light isnt blinking on my 2000 300M Chrysler


you need to replace the rear driver side light bulb. it will fix the problem.

Feb 27, 2009 | 2000 Dodge Ram 1500 Truck

Not finding what you are looking for?
1999 Ford Taurus Logo

1,468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...