Question about Oldsmobile Cutlass Supreme

1 Answer

72 0lds cutlas supreme vin# locations

I am trying to reregister a 2drht cutlass that has no registration papers it has checked out clean of theft,damage,liens they want to sight the three locations that the #s are I found the windshield one but where are the other two is there a serial# on the engine and they said there is one on the frame where are they I will be very thankfull to find them and get new reg for this car it is in very good condition

Posted by on

  • rjr2rodger Mar 06, 2009

    thankyou!I will look at these places

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 110 Answers

All right here you go with some suggestions, one check the frame rail left side towards the rear, if the car has been undercoated then you will have to pressure wash the rail to see, if factory panels are still in the trunk then there is one under the carpet stamped in the metal usually above spare tire hole. check the firewall on the passenger side chevelles use to put a plaque there with ser on it, the fenders in front are another good place to look, usually the right fender also. if you still need another look on inside of firewall drivers side behind the dash or under the rear seat if you get lucky that is where you will find the protecto plate, how cool that would be. let me know if you need any more, chevy on the chevelle used to stamp both frame rails and the rear end also had a tag on it with the #. happy motoring

Posted on Mar 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the cumputor located on the 91 olds cutlas


Should be on the passenger side of the engine compartment.
You would need to check for spark at the plugs and fuel pressure before looking at the computer.

Oct 09, 2012 | 1994 Oldsmobile Cutlass Supreme

1 Answer

1987 oldsmobile cutlas supreme fuses,car want start


Car no start problem is sometimes very difficult to confirm. You try all the possible things, but still you get no fault and problem is still the same.--------
In that case, you need to check few things individually.
Check the spark,the battery,the crank, the fuel and other most possible parts. Click this link below for more details:-- http://howtobyme.blogspot.com/2011/10/car-troubleshooting-tips.html

Oct 20, 2011 | 1986 Oldsmobile Cutlass Supreme

2 Answers

My 92 cutlass supreme wont stay started whats wrong with it


Most of the time when it starts for 1-5 seconds then dies, its a failing of the antitheft system. Read about it thru this link. Some possible solutions too. http://vatspasslockpasskeysecurityhelp.yolasite.com/

May 20, 2011 | 1992 Oldsmobile Cutlass Supreme

1 Answer

My 1993 cutlas supreme stalls randomly while idling or driving , but restart right away


You will need to change the crank position sensor first and see if it corrects the problem. It is located behind the engine near the firewall. It's a bit tricky to get to it, you would need to rotate the engine forward then look under the exhaust manifold and under the cylinder closest to the drivers side. Use a 10 mm deep socket to loosen bolt. After replacement and it is still stalling then you will need to replace the ECM (vehicle computer). If it turns out to be the computer, go to your local junkyard to get an inexpensive replacement Click on the link below to view the CPS, it is around $22

http://www.partstrain.com/store/?N=0&Nr=AND(make:Oldsmobile,model:Cutlass+Supreme,year:1993,brand:Delphi,part:Crank+Position+Sensor)&ptc=S1171391678W45d204bec356b&ptid=ptc45891f6tnywz&id=Olqtv7cphi





Olds-Cutlass-Ciera.htm">http://en.allexperts.com/q/Oldsmobile-Buick-Repair-826/f/1992-Olds-Cutlass-Ciera.htm

Apr 12, 2010 | 1993 Oldsmobile Cutlass Supreme

1 Answer

Need to know the firing order of a 1995 oldsmobile cutless supreme/3100/v6


For 1995 Oldsmobile Cutlass Supreme 3.1 liter V-6 VIN "M" check...

72227b5.gif

Hope help (remember rated this).

Mar 25, 2010 | 1995 Oldsmobile Cutlass Supreme

1 Answer

How much will it cost to fix my door handle on my 1996 cutlas sup


Sir,
25 to 35$.
click this link for more info

Thanks Good Luck
Appreciate to rate as "Fixya"

Mar 12, 2009 | 1996 Oldsmobile Cutlass Supreme Coupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

64286 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...