Question about 1992 Chevrolet Lumina

1 Answer

1988 ford mustang. Turn signals do not work

I have a 1988 ford mustang with a 4 cylinder engine. The problem that i am having is that the turn signals do not work.I tried the hazards and they work and the fuse seems to be fine. I replaced the original fuse witha new one and still no turn signal. Any suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,865 Answers

You did not say if its one turn signal or all turn signals that dont work. It could be a bulb.One bad bulb will cause the others not to work , normally one side of the car.Mostly left and right sides of the car is on a different circuits.
If it is all of them not working , it could be the switch in ur steering colum thats bad.Its the switch that the handle u move to turn the turn signals on and off.You would normallytake off the steering wheel to fix that switch.But its a bigger jpb , a pain.So make sure its not a bulb or a fuse first and make sure ur useing the right amp fuse.If its not that.Then id check the conection where the bulb screws into the socket.There can be corrosion there and that can cause a bad conection.Besides a bad bulb thats always been the number one reason my turn signals have not worked.You just have to keep eliminating the possibilities. Keep checking.

Posted on Mar 04, 2009

  • Joe Hogan Mar 04, 2009

    please rate my answer as a fixya!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need firing order for 1988 ford mustang v-6


Sorry, 1988 Ford Mustang, only came with a 2.3L 4 cylinder or a 5.0L 8 cylinder, no 6 cylinder.

Sep 01, 2010 | Ford Mustang Cars & Trucks

1 Answer

No headlights or turn signals on my 1988 mustang


Check the turn signal dimmer switch. It is under the steering wheel. You will need to take the steering wheel off. See if any wires are loose or damaged going to the turn signal switch. Good Luck!

Nov 29, 2009 | 1988 Ford Mustang

2 Answers

1988 mustang gt no turn signals ,hazards ,wipers,parking lights all work...checked relays,fuses,fusible links and grounds.....help!


More then likely its going to be the turn signal switch itself. With everything else working, the switch fr the signals probably wore out. Keep in mind the car is 21 years old.

Nov 20, 2009 | 1988 Ford Mustang

1 Answer

I installed a new ignition switch in my 1988 mustang


there is a ingnition rod going from key switch to ingnition switch ,it is probly not in the slot any more or the ingnition cam is broken

Jun 28, 2009 | 1988 Ford Mustang

1 Answer

How do I change an Ignition on a 1988 Ford Mustang GT Automatic Transmission


Not exactly sure when Ford changed the style. But I think it is this one. First of all do you have the key thet fits the lock cylinder you are changing? If so, put the key in and turn it to the run position. If this is the style I'm thinking about there will be a small hole in the column cover under the lock cylinder. A small allen wrench works fine. Push in with allen wrench and at the same time pull out on lock cylinder. (you may have to turn key alittle one way or the other to release pin.) If you don't have the key for this lock cylinder it will be EXTREMELY difficult to remove. Hope this is helpful .

Mar 22, 2009 | 1988 Ford Mustang

1 Answer

1988 Ford Mustang. Turn signals won't work


If the signals come on, but don't flash, check & or replace your flasher, or swap it with hazard flasher if it's the same to confirm flasher is the problem. Hazard & blinkers are on serarate flashers.

Mar 04, 2009 | 1992 Chevrolet Lumina

2 Answers

1988 ford Mustang 2.3L


your turn sig switch in the steering column is probably worn out and needs to be replaced, have a steering column specialist come out and fix or go to the dealer.

Jul 29, 2008 | 1987 Ford Mustang

Not finding what you are looking for?
1992 Chevrolet Lumina Logo

242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...