Question about 2002 Ford F250 Super Duty SuperCab

1 Answer

Singnal light flashers

Where can I find it and where can I located it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

The turn signal relay flasher is located in a black box, approx. 3 inches long, 2 inches wide, and 2.5 inches deep. This is under the dash on the driver side. To locate it, lay yourself between the accelerator and brake pedals, and look up. If the flasher is original, the box will be taped. Remove the tape and the clasps on each side of this box and inside will be your flasher as well as an accessory relay. The flasher is larger and closer to the passenger side than the relay.

Posted on Mar 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the flasher relay located on 2006 Montana


Relay located in right side of dash in fuse block behind access panel

Jul 18, 2014 | 2006 Pontiac Montana SV6

2 Answers

The turn singnals don't flash on my 2004 chevy impala


It's time to replace the flasher relay.The signal flasher is located under the dash near the steering column.Also check for the indicator bulb.Replace them if damaged.
Front Turn Signal Light Bulb Size: 3457ALL
Rear Turn Signal Light Bulb Size: 3057
Hope this helps.Your valuable feedback would be appreciated.Thanks

Jun 11, 2011 | 2004 Chevrolet Impala

1 Answer

LEFT TURN SINGNAL WONT FLASH


I don't think it would be the flasher since the right signals are still working. Check all your light bulbs including the side marker lights. They must all be working for the turn signal work. If you can't find a bad bulb, then go ahead and replace the flasher.

Dec 31, 2010 | 1995 Buick Riviera

1 Answer

My 1999 ford exploler singnal lights are not working


I suggest check the FLASHERS for turn sugnal and hazard lights.

Both the turn signal flasher and the hazard warning flasher are mounted on the fuse panel on the truck. To gain access to the fuse panel, remove the cover from the lower edge of the instrument panel below the steering column. First remove the two fasteners from the lower edge of the cover. Then pull the cover downward until the spring clips disengage from the instrument panel.

The turn signal flasher unit is mounted on the front of the fuse panel, and the hazard warning flasher is mounted on the rear of the fuse panel.

Hope help with this; rmemeber rated this post.

Apr 09, 2010 | 1999 Ford Explorer

1 Answer

My turn signals and hazard lights do not work. I have checked the fuses and they are fine. What else could be the problem? How do I fix it?


the turn singnal switch is called a multifunction switch. this controls both your hazzards and the turn singnals.this could possibly be your problem.but before you buy this part that is over $100. try to locate your hazzard flasher or your turn singnal flasher relay under the dash. this is most likely your problem.

Dec 24, 2009 | 1998 Ford Taurus

1 Answer

Which fuse works the taillights on the 99 ford ranger pickup


check the flasher its under the steering column/please rate my response thank you very much

Feb 02, 2009 | 1999 Ford Ranger SuperCab

Not finding what you are looking for?
2002 Ford F250 Super Duty SuperCab Logo

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...