Question about 1991 Ford F150

2 Answers

Leaking tranny fluid from rear of pan.

Is this just a gasket?ametuer mechanic at best but i have done some things.is this something i can do?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 740 Answers

Sounds like a transmission rear seal, if it coming from tail of tranny where drive shaft is connected. God luck and thanks for using FIX YA

Posted on Mar 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 508 Answers

You don't specify rear of what. So here are your possible options. If it is the rear tailshaft of the tranny you need to replace the tailseal. A very easy thing to do. If it is the pan , then replace the pan gasket.

Posted on Mar 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Leaking transmission fluid


Transmission oil is very viscous and will leak from the smallest opening. There is a set tension to do the pan screws up to and if you exceed that setting the gasket squeezes out and the oil will leak out. It is best to use an adhesive sealent on the tranny body first ,put up the gasket let it set for a few minutes . paut adhesive seealnt on the pan and bolt up with minimun bolt tension. After a few minutes retension the bolts correctly. As a firther check remove the inspection plate under the torque converter and check for oil leaks down the front ot the tranny behind the converter.

Feb 23, 2013 | Cars & Trucks

1 Answer

How do I, automatic trans filter and fluid replacement.


i would not reccomend changing transmission fluid yourself. do not do it!!!

to change transmission fluid and filter, you have to take the tranny pan off the bottom of the tranny and it will make a mess of fluid. then you have to carefully remove the old tranny pan gasket, which is best done with a special machine. if you fail to remove all of the gasaket, or damage the lip of the pan while removing the gasket, then the new tranny seal will leak, and the tranny will not hold fluid. tranny fluid and filter needs to be done in a professional shop where they have the correct equiptment.

Mar 13, 2011 | 1997 Toyota Tacoma

1 Answer

Leaking tranny fluid by the torque converter is this my rear seal?


It is most likely the front seal on the Tranny, or a leaking tranny pan gasket.
The rear seal on the engine would leak motor oil

Nov 30, 2010 | 2003 Saturn VUE

1 Answer

Transmission leaks, clunks into gear


Well your clunking noise is most likely the u-joints the leaking pan is the tranny pan what you would have to do is get a tranny kit and change the pan gasket tranny filter and fluid or take to a shop and have a tranny service done.

Sep 02, 2009 | 1999 Chevrolet Blazer

1 Answer

How do I drain transmission fluid (2000 sable ls(dohc))?


On an automatic tranny, the tranny oil pan is removed to drain the tranny fluid - a somewhat messy job. Typically when this done the tranny filler is replaced. A new pan gasket is installed in this procedure.
On the manual tranny, there is a drain plug at the bottom side of the tranny to drain the oil.
I have used a home made setup using a suction pump with small diameter tubing to **** the fluid out from the tranny filler tube. This is when I was replacing the filter and I dropped the pan. I did the suction routine to avoid all that fluid dripping out when you loosen the pan.
Have you located the leak? Is it from the tranny oil pan or maybe from a tranny cooler line?

Aug 10, 2009 | 2000 Mercury Sable

3 Answers

How to change trans. fluid and filter in a 2000 mitsu. mirage 1.8?


first you need to get a pair of safety glasses to protect eyes from cleaner. then you need 12.6 pts or 6.5 to 7 quarts of transmission fluid+ filter.you also need a drain pan to catch transmission fluid.you need a 3/8 ratchette and socket set.you need some paper towel and maybe1 or 2 cans of brake cleaner.now you want to safely raise and support car on jack stands.make sure you are on solid level ground.put drain pan under transmission to catch fluid.take ratchette wrench start removing tranny pan front and side bolts.loosen rear bolts one turn let the pan drain.when all tranny fluid drain out of pan. then remove pan clean it good with brake cleaner.remove all traces of old gasket. from pan then dry with paper towel..then you remove tranny filter.becareful not to damage anythingthen put in your new tranny filter then.wipe and carefully clean around gasket area on transmission with paper towel.make sure there is no traces of olds gasket material on tranny area where tranny pan gasket seals.now get new gasket align its with tranny pan holes.you might want to buy a gasket adhesive.just put on some to hold gasket in place when you install it to transmission.besure to clean all tranny pan bolts real good with brake cleaner. then dry them off real good.because some transmission you have to put a little rtv sealant on bolts.to keep them from leaking.now once you get bolt holesand gasket on transmission pan line up.all tranny pans bolts with a little rtv silicone on threads and on bolts head where they meet the pan.then you transmission pan in place.make sure gasket and bolt holes line up.when putting bolts in dont tighten them until you get them all in first.when all bolts are in.then you tighten criss cross dont over tighten them. torque them to 90 inch pounds .when all is done .starting putting tranny fluid in.and check for leaks.start the engine up let it idle for few minutes if you see no leaks lower car down to ground.then move transmission gear selector through each range and back to park.make sure tranny fluid level correct before driving car. WARNING IF YOUR CAR DONT HAVE THE TRANSMISSION DIP STICK.AND HAVE A FILL CAP INSTEAD THE DEALERSHIP HAS TO CHANGE FLUID.BECAUSE THEY HAVE TO RAISE CAR ON LIFT TO CHECK FLUID LEVEL.BECAUSE CAR HAS TO BE RAISE UP LEVEL THEN A DRIP PLUG IS MOVED TO CHECK TRANNY FLUID LEVEL.

Jul 19, 2009 | 2000 Mitsubishi Mirage

2 Answers

Im thinking of doing a transmission service myself.


it's not hard, but you'll need to count the bolts so that you gwt the right gasket. Undo all the bolts but the rear two corners-loosen these but don't remove. Allow the pan to lean to drain the fluid then remove the pan, replace the filter, replace the gasket, reinstall pan and add tranny fluid to the dipstick.

Jul 06, 2009 | 1998 Mercury Sable

1 Answer

00' Kia Sephia LS not shifting past 1st gear


first you need to buy transmission fluid new filter and new gasket.you need 11.4 pints of transmision fluid.raise front of vechicle.set parking brake.block both back wheels.besure support vechicle weight with jack stands. get a drain pan.if your transmission pan dont have a drain plug.loosen rear pan bolts a few turns.remove the front and side transmission pan bolts. let fluid drain.remove tranny pan. then clean old gasket material from transmission and pan carefully.dont scratch or damage surface.clean old tranny bolts using brake cleaner or buy new tranny bolts.you have to put a tiny film of rtv silicone on tranny bolts so they wont leak.carefully remove old tranny filter and put on new filter.clean all grease grim away from tranny pan it should be **** and span because.you might need a little gasket adhesive to hold gasket in place while putting pan back on transmission.to line up bolt holes.loosely put all bolts in you have to move pan a little to get holes line up.when all is finish put tranny fluid back in.besure you put 11.4 pints back in that about 6.5 quarts. make sure tranny fluid level is right before driving vechicle.l

Jun 19, 2009 | 2000 Kia Sephia

Not finding what you are looking for?
1991 Ford F150 Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...