Question about 1992 Mitsubishi Eclipse

1 Answer

Car makes grinding noise when I try to start, after new bolts were installed, started right up then 2 days later, it began grinding again but starts right up if someone holds the starter and engine together. Is there a way to fix this without replacing the starter? My car is a 1991 Mitsubishi Galant

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 96 Answers

Try using some thread locker on the bolts. If this still doesn't help, you may have to get a helicoil repair kit. These kits repair damaged threads by drilling the bad ones out, tapping the hole with new threads, then screwing a thread adapter in to bring it back to the original size.
Hope this helps:)

Posted on May 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brakes make a whistle noise when applied and sometimes a low grown or grinding when coming to a slow stop or start.


A grinding or rumbling noise can also be symptoms of a wheel bearing or constant velocity joint in a driveshaft. A worn wheel bearing can also cause a 'whistling' sound (as can a worn CV joint).

A grinding noise with brakes is either worn pads causing metal to metal contact on the brake disk/rotor, or the brake backing plate catching on a spinning rotor ... or a loose/missing anti squeal brake shim (they stop the pads from rattling and vibrating).

However, as you say a mechanic has looked at the brakes and can't find anything wrong .. I think I would begin to suspect a wheel bearing or constant velocity joint on the driveshaft (front wheel drive cars).

May 05, 2016 | 2007 Honda Accord Sedan

2 Answers

After new brakes, grinding noise in rear. repair guy says need $600.00 proportion valve job! Already had new one 3 years ago.


The grinding sound could be a brake pad installed wrong or backwards.There should not be any grinding what so ever.There is a serious problem.I would take it to a shop or dealership you can trust and have it check out.

Oct 23, 2012 | Cars & Trucks

1 Answer

I bought a 2000 lincoln ls about a month ago and after we bought it, it started having an over heating problem. Since then, we put new fan, new t-stat, new coils and valves, new radiator cap, new belts,...


I believe you have a head gasket or cylinder head problem (cracked head or blown head gasket).. If it is the gasket, the intake and cylinder head must be removed and a new gasket installed.. If it is the head itself, in addition to what have just said, you will have to have the head repaired or get a reconditoned or new one. This is a major repair.

Mar 25, 2011 | Lincoln LS Cars & Trucks

2 Answers

Car pulls right, terrible grinding noise from front right.


TAKE IT BACK WHERE THEY DONE THE LAST LOT OF WORK and tell them to do the complete job again as it sounds like a con job to me as a wheel aligment should last for a year a least and the grinding is in the braking system and something must still be bent ,
Its still under warranty dont pay any more..

Oct 26, 2009 | 1993 Buick Regal

2 Answers

1995 Cavalier Z24 Car Wont Start


You either have a bad solenoid on your starter OR a bad ignition switch as these are the only two things that can cause the symptom you describe... I lean to the solenoid first, RARELY does an ignition switch sieze up in the start position but it is a possibility. Several national chain parts stores can test the starter for you (GM starters have the starter solenoid mounted directly to the starter and you need to remove the starter to get to it, so you would take the whole unit in to test it... REMEMBER to disconnect the battery first!)

Apr 13, 2009 | 1998 Chevrolet Cavalier

1 Answer

2000 volkswagon jetta engine noise and new plugs skipping


engine is pinking,predetonation of fuel or the fuel mixture is weak which can be caused by a vacumn leak on the inlet manifold ,such as the take off for the servo ,or the manifold bolts loose.Also the timing is set wrong which could be a fault with sensor or the sensor drive ring .Without the car in front of me i cannot really diagnose a fault like this ,either get the VW mechanic to have a look and if he thinks its electronic then take it to VW

Apr 10, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

Car makes grinding noise when I try to start,


You may need to install what they call shims in between the starter and the flywheel in order to align it correctly with the flywheel

Mar 03, 2009 | 1992 Mitsubishi Eclipse

1 Answer

1993 Bronco won't start at first try.


when it doesnt start tap the solenoid on the starter while turning key. if this works the starter solenoid is bad. does the starter make a grinding /clinking noise when starting?

Nov 18, 2008 | 1985 Ford Bronco

1 Answer

1996 jeep cherokee country


Sounds like the starter is going out. Autozone will check those for free. It's just 2 bolts mounting the thing. It's under the passenger side rear of the engine. Undo battery, those 2 bolts and keep track of which wires go where. Run down to Autozone for a check or a new starter.

Oct 26, 2008 | 1996 Jeep Cherokee Country

Not finding what you are looking for?
1992 Mitsubishi Eclipse Logo

255 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...