Question about 2006 Hyundai Sonata

1 Answer

On my 2006 hyundai the brake lights keep going out, I have changed the bulb,everytime I change it, as soon as a hit on the brakes it blows. what can I do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

This problem is due to the over voltage produced to that check battery

Posted on Mar 04, 2009

  • 1 more comment 
  • triloknath Mar 04, 2009

    this problem is due to the over voltage produced to that check battery

  • triloknath Mar 04, 2009

    this problem is due to the over voltage produced to that check battery

  • triloknath Mar 04, 2009

    this problem is due to the over voltage produced to that check battery


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My brake light fuse keeps blowing how to fix?

pull the rear bulbs out and try again, does it have a third brake light? does it work?

Dec 10, 2015 | 2006 Ford Territory 4.0

1 Answer

I have a Hyundai Getz. Everytime I switch on my indicators or hazards, they come on and stay there, and don't flash.

One of your lights are blown. Some of the lights are double duty, so the brake light might work, but the flash side might not. Change all brake lights and turn signal bulbs. 98% sure if you change all bulbs, it will fixya.

Dec 04, 2013 | Cars & Trucks

2 Answers

I have no brake lights an my 1998 Chevy Venture Van everytime I put a fuse in it blows soon as I hit the brake pedal

You most deffinatly have a dead short, thank god for fuses. You will need to chase all realated wires , look for a bare spot in a wire thats touching something metal. Good luck

Aug 19, 2011 | Chevrolet Venture Cars & Trucks

2 Answers

Brake lights don't work

This sounds like a bad brake light switch, this switch is located on the bracket that holds brake pedal,you can test for power at switch,also if you remove connector and jump terminals with a wire and see if lights lite, if lights light then switch is bad,

May 27, 2010 | 2006 Hyundai Sonata

3 Answers

2002 Hyundai Sonata brake lights stuck on.

Check brake switch located near the pivot point on brake pedal move switch with your finge and see if it's stuck, May need new brake switch.

Apr 27, 2010 | 2006 Hyundai Sonata

1 Answer

How do you change the brake light on the 2006

the carpet cover comes off the rear deck in the back windo then you will find the screws that hold it down

Apr 22, 2010 | 2006 Hyundai Sonata

1 Answer

One brake works and one does not. both tail lights work and i have already changed the bulb. The car is a 2006 Hyundai sonata.

I have a '03 Sonata. One of the brake lights went out when it was new. I had the dealership fix it since it was still under warranty. Since then, I have replace it 4 or 5 times. First other problem was the cruise did not work when my lights were on. Next, the dash light started coming on when I hit the brakes. Then, the parking lights would come on when I hit the brakes. After that, the cd player started turning on and off by itself. All of this has been going on for 3-4 years. I had searched the web, and everybody said they had problems but the dealerships could not resolve them. I didn't have the money to try to get it fixed. It would not pass inspection last week because the brake light was dim. The mechanic said the wrong light was in there (remember, first replaced by dealership, then I bought lights from auto parts store that specified my make and model). He grabbed up what he knew was the right bulb, and THAT FIXED ALL MY ELECTRICAL PROBLEMS! I hope this info will help some other folks.

Jan 10, 2010 | 2006 Hyundai Sonata

1 Answer

Brake lights keep going out

Hi there
do you know what the cold cranking amps are in the battery that you had and now have you may have too much amps going thru the system i would definatly go with what the owners manual or your dealer calls for... also make sure that the fuse for the brake lite has the correct amps for the lite

Mar 04, 2009 | 2006 Hyundai Sonata

1 Answer

Bulbs keep burning out

When you replace headlights in today's cars, DO NOT TOUCH THE GLASS OF THE BULB!. Handle the bulb only with the packing material the bulb ships in, or with a clean dry cloth.The oils in your skin will cause premature failure of the bulb.

Also, check the sockets (car side) carefully to make sure they are not burned.

Feb 03, 2009 | 2006 Hyundai Sonata

2 Answers

Brake Light Fuse & Gas Gauge

Start by replacing your brake light bulbs. If it still blows the fuse, them your brake pedal switch. If it still happens then you have a shot circuit in your wiring between your fuse panel and your brake lights.

Jul 10, 2008 | 2000 Mercedes-Benz SL-Class

Not finding what you are looking for?
2006 Hyundai Sonata Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides