Question about 1998 Plymouth Voyager

2 Answers

Need to clean hardrive on computer

I try to defrag and recieve a message''delete programs on hardrive''. How do I delete programs on my hardrive? I am a newbie. My computer runs very slow.

I have a HP desktop computer that is two years old. I have windows 2000xp. I use Explorer 7.

thanks

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

The steps listed above my not cure a slow computer completely. One thing that can cause issues that slow down the system are infections. Spyware and Virus infections can cause alot of issues with your computer making it run slow and give you errors.

I recommend letting a professional help you.

http://www.nicklockard.com

Posted on Jun 24, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 181 Answers

Click on the start button and then click run and type %temp% and you will get the folder and please delete all files inside that folder..
click on start->allprograms->accessories->system tools->diskcleanup
please follow the above steps it will solve your issue

Posted on Mar 16, 2009

  • vimalraj baskar
    vimalraj baskar Mar 17, 2009

    clcik on the start button->click on allprograms->click on accessories->click on the system tools->click on diskdefragmenter and follow the onscreen instruction

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do you have to have the remote in order program your key


No. programming a new key takes the old key. Turning the ignition on then off and inserting the new key and turning on. If trying to program the old key, this is different. This could be the key, the reciever, or the module has gone bad. Have to computers scanned for codes.

Jan 03, 2015 | 2006 Honda Odyssey

1 Answer

My dopo D7015 reset itself. Now it says i have insuficient space. what do i do?


remove (delete ) any old files and programs that are no longer required or down load all files to a stand alone memory . Defrag the system and that should give more space. get rid of add on's and cookies.

Dec 31, 2013 | Cars & Trucks

1 Answer

How to delete a message from my friends chat box i sent


Your question is unclear, but I think I have an answer for you anyway. If you basically just typed a message and sent it to someone, and wish for them not to view it, good luck. You would need their account credentials to "mark as read" or "delete" or whatever after logging in as your unintended emailee, and/or do it from their computer.

Oct 19, 2012 | Cars & Trucks

1 Answer

How to program a garage door


You have a rolling code system.Rolling code program requires you push a learn /program button on the GDO reciever at your home. Its located on your garage door reciever under the light cover. on you garage door unit. Use the garage door manufacture instruction to program the learn to recieve and accept home system for the garage door opener in your car

Mar 02, 2012 | Cars & Trucks

1 Answer

I have a kenwood excelong kdc-x993. my bluetooth compatible phone is paired with my reciever, and has been working fine for two months.Suddenly it stopped working, and the bluetooth doesn't work at all. On...


Try deleting the stereo from your bluetooth profile in your phone. Then try disconnecting the positive battery lead for a minute or so and reconnecting to reset the stereo. Then try again. If not, contact Kenwood support, and if it's still under warranty period, I would complain :)

May 09, 2010 | 2003 Ford Mustang

2 Answers

Can't load xp on hp xw4300. Has sata hdd & ide dvd drive. Xp can't detect hard drive and if press f6 it says there is no floppy drive


replace your cables and try again. if unsuccessful locate your hardrives manufacturer ie: maxtor software MAXBLAST , download the hardrive software utility and ``0 fill`` your hardrive to factory default.

Nov 05, 2009 | Cars & Trucks

4 Answers

Passlock


turn key all the way on (not to start) let set for 1 hur cycle key and try it.

Jul 20, 2009 | 1999 GMC Jimmy

1 Answer

Computer Froze!


shut it off ,then turnn it back on and do a disk scan ,disk clean,defrag ,ect.ect.

Mar 04, 2009 | 2005 Peugeot 405

2 Answers

Wont start my odometer blinks and says no bus


From the official Durango shop manual......(abbreviated)

Self Diagnosis Test

Vehicle key position is OFF ,or able to pull key out.
Hold in the trip odometer button (dont release yet)
Turn key to the ON position (one notch), but DON'T try to start the engine
Continue holding the trip button for about 10-12 seconds until CHEC appears in the odometer display
Release the trip button.
Series of three digit numeric failure codes may appear.
If no failure message appears, the self diagnostic test will proceed as described in step 6


Code Chart

110- cluster CPU,RAM,EEPROm failure, replace cluster

900-CCD data bus not operational, check CCD data bus connections at cluster, check the cluster fuses,check the CCD data bus bias, cehck the CCD data bus voltage, check the CCD data bus terminations.

920-cluster is not recieving a vehicle speed message from the PCM, check PCM software level and reflash if required, use the ($2500+) DRBIII scan tool to verify the vehicle speed message is being sent by the PCM

921-the cluster is not recieveing a distance pulse message from PCM,check PCM software level and reflash if required, use the ($2500+) DRBIII scan tool to verify the distance pulse message is being sent by the PCM

940-the cluster is not recieving an airbag lamp-on message from the ACM, check the CCD data bus connections at the ACM, check the ACM fuse.

950-cluster not recieving an ABS lamp-on message from the CAB, check CCD data bus connections at the ACM, check the ACM fuse.

960- clsuter not recieving a PRND21 message from the TCM, check the CCD data bus connections at the TCM, check the TCM fuse.

999-An error has been discovered, record the failure message, depress the trip odometer reset button to continue the Self-Diagnostic Test

Step 6
Instrument cluster will test each segment of the odometer (all first, then each one seperately)

Step 7
Bulb test

Step 8
Gauge test

Step 9
test completed

The instrument cluster will return to normal operation at the completion of test, if ignition switch turned off, or a vehicle speed message indicating movement recieved from the PCM on the CCD data bus.

Hope that help you or anyone else in future.

Aug 10, 2008 | 2000 Dodge Durango

Not finding what you are looking for?
1998 Plymouth Voyager Logo

Related Topics:

78 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...