Question about 1999 Chevrolet Suburban

1 Answer

No brake or turn signals the fuse blows

I have a 1999 chevy suburban the the brake light fuse blows as so as i step on the brake i've change the the brake light switch and replace the multi switch checked the wiring @ the brake light switch all looks of I've even cut the white wire coming off the brake light switch to make sure that the brake light switch is working it dose and there's no trailer package

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 51 Answers

What about the sockets of the lights are they rusted in the contact spot and touching the 2 positive connections

Posted on Mar 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BRAKE LIGHTS DON'T WORK BRAKE SWICH CHANGED BULBS CHECKED AND INSIDE FUSES OK


Do turn signals work ok? Do you have current at the brake switch?

Feb 07, 2014 | 1999 GMC Suburban

1 Answer

Have a 1999 Chev. Suburban. Problem is with brake lights. Top panel (on roof) works but neither side panel works. Replaced circut boards in tail lights, new bulbs, and all fuses are good. What next?


WITH A GOOD FUSE TESTER, TEST ALL THE FUSES FUSEBOX UNDER THE HOOD & INSIDE THE VEHICLE. IF THE FUSES ARE ALL GOOD WITH THE TESTER YOU MUST HAVE A BAD BRAKE LIGHT SWITCH OR A BAD TURN SIGNAL SWITCH. THE BRAKE LIGHT CIRCUIT GOES UP THROUGH THE TURN SIGNAL SWITCH & THEN TO THE BRAKE LIGHTS. FIRST OF ALL IS THE BRAKE LIGHT SWITCH GOOD ? THE ORANGE WIRE FEEDS THE BRAKE LIGHT SWITCH, THE WHITE WIRE PUTS POWER TO THE TURN SIGNAL SWITCH, SO THE LIGHTS CAN BE USED AS TURN LIGHTS OR BRAKE LIGHTS. , PUT A TESTER IN THE WHITE WIRE & PRESS ON THE BRAKE PEDAL. IF THE TEST LIGHT LIGHTS UP, BRAKE LIGHT SWITCH IS GOOD, BY THE WAY THE BRAKE LIGHT FUSE MAY BE LABELED" STOP", THE FUSE LABELED" BRAKE" IS FOR THE ABS SYSTEM. TO CHECK THE TURN SIGNAL SWITCH FOR BRAKE LIGHTS, REMOVE THE PLASTIC COVER FROM UNDER THE STEERING WHEEL, PRESS ON THE BRAKE PEDAL, PUT THE TESTER IN THE SMALL YELLOW WIRE, THEN THE SMALL GREEN WIRE. IF THERE IS NO POWER IN EITHER WIRE, THE TURN SIGNAL SWITCH IS BAD.

Jan 11, 2011 | 1999 Chevrolet Suburban

3 Answers

Brake lights keep blowing a fuse on a 1997 GMC suburban


i have a 95 gmc suburban that keeps blowing the fuse when break is aplied i even disconected the back lights and it does the same what could it be

Dec 21, 2010 | 1997 GMC Suburban

2 Answers

I have a 1996 Suburban that keeps blowing fuses on break lights


Check the turn signal flasher,and the trailer wire adapter that plugs in under the rear of the truck.Check the brake light switch,to see if it is grounding out on something.

Jan 03, 2010 | 1996 GMC Suburban

1 Answer

1999 GMC Suburban, K1500 4WD. Top brake light bar


third light is different circuit. saftey reason check fuses grounds wires

Oct 10, 2009 | 1999 GMC Suburban

1 Answer

Gauges blow fuses,brake and turn signal lights dont work


all my gauges quit working and my turnsignals checked all my fuses under the hood and dash whats my problem?

Mar 11, 2009 | 1994 Chevrolet Suburban

1 Answer

Brake lights blows fuse right away


I had the smae problem, i replaced the tail light circuit board and the problem was solved.

Mar 03, 2009 | 1999 Chevrolet Suburban

2 Answers

Brake lights do not work


This is a well documented problem, replace the turn signal/multifunction switch to correct this issue, this very problem happened on my GMC, it is a 99 as well, replaced the switch as instructed by a chevy forum member and it fixed the problem

Nov 07, 2008 | 1999 GMC Suburban

2 Answers

No turn signals or side brake lights on 94 chevy suburban


the problen is probably the turn signal switch with a test light check for power at brake switch if no power check for power at turn signal switch the brake lights are incorperated through the turn signal switch

Oct 18, 2008 | 1994 Chevrolet Suburban

Not finding what you are looking for?
Cars & Trucks Logo

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...