- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The sensor codes have to be read off a computer to see the problem, either speed sensor, sounds more like ABS module. Locate the main fuse/control box under hood. There should be either a
relay or large fuse marked for abs.Good Luck.Please rate me as ' helpful ' if satisfied.
The Vehicle Speed Sensor is located on the right side of the transaxle extension housing. ( passenger side) It may be hard to spot because it is covered over with a foil type heat shield. If you plan on replacing it yourself please Note, You need to remove the clip and swap the plastic drive gear onto the new sensor and secure it with the clip. Good Luck From Ernie @ RedDeer, Alberta, Canada.
hi the transponder is the chip in the key my car is the same its the red bit on the key.... and there is a reciver around the ignition barrel where the key go's to start the car its a black circle with 3 or 4 wire's runing to it you can't by pass this but i have been told that some are made with an external P.A.T.S system (Immobiliser system ) but same are built in tio the e.c.u if its external it might be poss to bypass im also so sure you can buy a key coder off the net try googleing it i hope this is a help to you ......